초록
기존 전기적 상호 연결을 사용한 네트워크-온-칩(Network-on-Chip, NoC)의 전력 및 성능 한계를 보완하고자 광학적 상호연결을 이용하는 하이브리드 광학 네트워크-온-칩(HONoC)이 등장하였다. 하지만 HONoC에서는 광학적 소자 특성으로 인해 서킷 스위칭을 사용함으로써 경로 충돌이 빈번하게 발생하며 이로 인해 지연 시간 불균형의 문제가 심화되어 전체적인 시스템 성능에 악영향을 미치게 된다. 본 논문에서는 경로 충돌을 최소화 시켜 지연 시간을 최적화 할 수 있는 새로운 태스크 매핑 알고리즘을 제안하였다. HONoC 환경에서 태스크를 각 Processing Element (PE)에 할당하고 경로 충돌을 최소화하며, 부득이한 경로 충돌의 경우 워스트 케이스 (worst case) 지연 시간을 최소화 할 수 있도록 하였다. 모의실험 결과를 통해 무작위 매핑 방식, 대역폭 제한 매핑 방식과 비교하여, 제안된 알고리즘이 $4{\times}4$ 메시 토폴로지에서는 평균 43%, $8{\times}8$ 메시 토폴로지에서는 평균 61%의 지연 시간 단축 효과가 있음을 확인할 수 있었다.
To overcome the limitations in performance and power consumption of traditional electrical interconnection based network-on-chips (NoCs), a hybrid optical network-on-chip (HONoC) architecture using optical interconnects is emerging. However, the HONoC architecture should use circuit-switching scheme owing to the overhead by optical devices, which worsens the latency unfairness problem caused by frequent path collisions. This resultingly exert a bad influence in overall performance of the system. In this paper, we propose a new task mapping algorithm for optimizing latency by reducing path collisions. The proposed algorithm allocates a task to a certain processing element (PE) for the purpose of minimizing path collisions and worst case latencies. Compared to the random mapping technique and the bandwidth-constrained mapping technique, simulation results show the reduction in latency by 43% and 61% in average for each $4{\times}4$ and $8{\times}8$ mesh topology, respectively.