Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Experimental Study under Reciprocating Sliding on the Friction Noise

왕복운동에서의 마찰소음 실험적 연구

  • Choi, Hoil (Division of Automotive & Mechanical Engineering, Kongju National University) ;
  • Kang, Jaeyoung (Division of Automotive & Mechanical Engineering, Kongju National University)
  • Received : 2013.04.03
  • Accepted : 2013.06.25
  • Published : 2013.07.20
Download PDF
⟨ Previous Next ⟩

Abstract

The present study provides the characteristics of friction noise under reciprocating sliding. The friction contact is generated between the aluminum plate and plastic, which results in friction noise. The experimental results reveal that the friction noise under reciprocating sliding can be produced as the friction coefficient increases. It is also shown that the vibration modes of the pin with dominant deflection in the sliding direction is participated on the friction noise.

Keywords

References

  1. Nam, J. and Kang, J., 2012, A Basic Experimental Study on the Squeak Noise Using the Pin-on-disk, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 8, pp. 736-741. https://doi.org/10.5050/KSNVE.2012.22.8.736
  2. Chen, G. X., Zhou, Z. R. and Leo, V., 2002, Effect of Surface Topography on Formation of Squeal under Reciprocating Sliding, Wear, Vol. 253, No. 3-4, pp. 411-423. https://doi.org/10.1016/S0043-1648(02)00161-8
  3. Chen, G. X. and Zhou, Z. R., 2005, Experimental Observation of the Initiation Process of Friction-induced Vibration under Reciprocating Sliding Conditions, Wear, Vol. 259, No. 1-6, pp. 277-281. https://doi.org/10.1016/j.wear.2005.02.023
  4. Chen, G. X. and Zhou, Z. R., 2003, Correlation of a Negative Friction-velocity Slope with Squeal Generation under Reciprocating Sliding Conditions, Wear, Vol. 255, No. 1-6, pp. 376-384. https://doi.org/10.1016/S0043-1648(03)00052-8
  5. Chen, G. X. and Zhou, Z. R., 2003, Experimental Investigation into Squeal under Reciprocating Sliding, Tribology International, Vol. 36, No. 12, pp. 961-971. https://doi.org/10.1016/S0301-679X(03)00106-3
  6. Costa, H. L. and Hutchings, I. M., 2007, Hydrodynamic Lubrication of Textured Steel Surfaces under Reciprocating Sliding Conditions, Tribology International, Vol. 40, No. 8, pp. 1227-1238. https://doi.org/10.1016/j.triboint.2007.01.014
  7. Fam, H., Kontupoulou, M. and Bryang, J. T., 2011, Method for Friction Estimation in Reciprocating Wear Tests, Wear, Vol. 271, No. 5-6, pp. 999-1003. https://doi.org/10.1016/j.wear.2011.01.014
  8. Othman, M. O. and Abou-Arab, T. W., Mirzaa, M. C. and Elkholy, A. H., 1995, Friction-induced Vibrations of Reciprocating Contacts, Tribology International, Vol. 28, No. 5, pp. 293-300. https://doi.org/10.1016/0301-679X(94)00015-I
  9. Yang, C.-R., Chiou, Y.-C. and Lee, R.-T., 1999, Tribological Behavior of Reciprocating Friction Drive System under Lubricated Contact, Tribology International, Vol. 32, No. 8, pp. 443-453. https://doi.org/10.1016/S0301-679X(99)00074-2

Cited by

  1. Characteristics of Friction Noise with Changes of the Natural Frequencies in the Reciprocating Motion vol.24, pp.4, 2014, https://doi.org/10.5050/KSNVE.2014.24.4.332
  2. An Experimental Investigation of Dry Friction Noise for Several Metallic Materials vol.39, pp.7, 2015, https://doi.org/10.3795/KSME-A.2015.39.7.681
  3. Experimental investigation of friction noise on lubricated contact vol.31, pp.12, 2017, https://doi.org/10.1007/s12206-017-1117-x