References
- Ahn, H. B., Lee, S. H., and Shin, S. H., 1997, Flow distribution in manifolds for low Reynolds number Flow, KSME International Journal, Vol. 12, No. 1, pp. 87-95.
- Foust, J. and Rockwell, D., 2007, Flow structure associated with multiple jets from a generic catheter tip, Experiments in Fluids, Vol. 42, pp. 513-530. https://doi.org/10.1007/s00348-006-0249-z
- Lee, S. K., Moon, N. S., and Lee, J. K., 2012, A Study on exit flow characteristics according to the orifice configuration of multi-perforated tubes, Journal of Mechanical Science and Technology, Vol. 26, No. 9, pp. 2751-2758. https://doi.org/10.1007/s12206-012-0721-z
- Chen, A. W. and Sparrow, E. M., 2009, Effect of exit-port geometry on the performance of a flow distribution manifold, International Journal of Applied Thermal Engineering, Vol. 29, pp. 2689-2692. https://doi.org/10.1016/j.applthermaleng.2008.12.035
- El Moueddeb, K., Barrington, S. F., and Barthakur, N., 1997, Perforated ventilation ducts : Part 1. A model for air flow distribution, Journal of Agricultural Engineering Research, Vol. 68, pp. 21-27. https://doi.org/10.1006/jaer.1997.0176
- Singh, R. K. and Rao, R. A., 2009, Simplified theory for flow pattern prediction in perforated tubes, Nuclear Engineering and Design, Vol. 239, pp. 1725-1732. https://doi.org/10.1016/j.nucengdes.2009.05.028
- Johnson, T., 2007, Diesel emission control in review, SAE Technical Paper 2007-01-0233.
- Heering, H. P., Onder, C. H., Elsener, M., and Schaer, C. M., 2003, Control of a urea SCR catalytic converter system for a mobile heavy duty diesel engine, SAE Technical Paper 2003-01-0776.
- Zhang, X. and Romzek, M., 2007, 3-D Numerical study of flow mixing in front of SCR for different injection systems, SAE Technical Paper 2007-01-1578.
-
Huang, Z., Zhu, Z., Liu, Z., and Liu, Q., 2003, Formation and reaction of ammonium sulfate salts on
$V_2O_5/AC$ catalyst during selective catalytic reduction of nitric oxide by ammonia at low temperatures, Journal of Catalysis, Vol. 214, pp. 213-219. https://doi.org/10.1016/S0021-9517(02)00157-4 - Plassat, G., Pichon, G., Vonarb, R., and Rocher, L., 2007, Fuel-borne catalyst assisted DPF regeneration on a renault truck MD9 engine outfitted with SCR, SAE Technical Paper 2007-01-1934.
- Ahn, T. H. and Kim, M. Y., 2012, A numerical study on the flow characteristics in the catalystic muffler with different inlet geometry, Proceedings, KSAE, pp. 301-306.
-
Jeong, S., Lee, S., Kim, W., and Lee, C., 2005, Simulation on the optimum shape and location of urea injector for urea-SCR system of heavy-duty diesel engine to prevent
$NH_3$ slip, SAE Technical Paper 2005-01-3886. - Birkhold, F., Meingast, U., Wassermann, P., and Deutschmann, O., 2006, Analysis of the injection of urea-water-solution for automotive SCR DeNOx-systems : Modeling of two-phase flow and spray/wall-interaction, SAE Technical Paper 2006-01-0643.
- Karlsson, M., Wallin, U., Fredholm, S., and Jansson, J., 2006, A combined 3D/Lumped modeling approach to ammonia SCR after-treatment systems : Application to mixer designs, SAE Technical Paper 2006-01-0469.
- Fluent User Guide. 6.2, The RNG k-e model, pp. 11-17.