설비공학논문집 (Korean Journal of Air-Conditioning and Refrigeration Engineering)

  • 제25권3호
  • /
  • Pages.137-142
  • /
  • 2013
  • /
  • 1229-6422(pISSN)
  • /
  • 2465-7611(eISSN)
대한설비공학회 (The Society of Air-Conditioning and Refrigerating Engineers of Korea)
권호 표지
DOI QR코드

DOI QR Code

고온가스 및 액체 바이패스 적용 용량가변 히트펌프의 성능특성에 관한 실험적 연구

An Experimental Study on the Performance Characteristics of Hot-gas and Liquid Bypass Heat Pump Systems for Capacity Modulation

  • 안재환 (고려대학교 기계공학부 대학원) ;
  • 주영주 (삼성전자 생활가전사업부) ;
  • 윤원재 (고려대학교 기계공학부 대학원) ;
  • 강훈 (고려대학교 기계공학부) ;
  • 김용찬 (고려대학교 기계공학부)
  • Ahn, Jae Hwan (Department of Mechanical Engineering, Graduate School of Korea University) ;
  • Joo, Youngju (Digital Appliance Division, Samsung Electronics Inc.) ;
  • Yoon, Won Jae (Department of Mechanical Engineering, Graduate School of Korea University) ;
  • Kang, Hoon (Department of Mechanical Engineering, Korea University) ;
  • Kim, Yongchan (Department of Mechanical Engineering, Korea University)
  • 투고 : 2012.12.05
  • 발행 : 2013.03.10
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

A small air-conditioner or chiller for a constant temperature bath normally uses a constant speed compressor. The constant speed compressor is relatively inexpensive, but it uses on/off control for capacity modulation. The on/off control has several disadvantages, specifically energy loss and large temperature fluctuation. Continuous operation with a bypass system can be an alternative to on/off control, for capacity modulation. In this study, a heat pump system having a hot-gas bypass and a liquid bypass was adopted. The performance of the bypass-type heat pump was measured, by varying the bypass valve opening. The differences of the COP between the hot-gas bypass and the liquid bypass, in the cooling and heating operations, were within 2% and 1%, respectively. The liquid bypass showed a wider range of capacity control in the cooling operation but the hot-gas bypass showed a wider range of capacity control in the heating operation.

키워드

참고문헌

  1. Ryu, Y. H., Hwang, Y. J., Kim, C. M. and Cho, K. S., 2002, Benchmark performance analysis of vapor compression system with capacity modulation compressor, Korean Journal of Air-Conditioning and Refrigeration Engineering, Vol. 14, No. 2, pp. 98-107.
  2. Baek, S. M., Choi, J. H., Byun, J. Y., Moon, C. G., Lee, H. S., Jeong, S. K. and Yoon, J. I., 2009, Characteristics of temperature control by hot-gas bypass flow rate on industrial water cooler, Journal of the Korean Society of Marine Engineering, Vol. 33, No. 8, pp. 1129-1136. https://doi.org/10.5916/jkosme.2009.33.8.1129
  3. Yaqub, M., Zubair, Syed M., and Khan, J., 2000, Performance evaluation of hot-gas by-pass capacity control schemes for refrigeration and air-conditioning systems, Energy, Vol. 25, No. 6, pp. 543-561. https://doi.org/10.1016/S0360-5442(00)00004-9
  4. Jeong, S. K., Lee, D. B. and Yoon, J. I., 2012, Comparison of system performances of hot-gas bypass and compressor variable speed control of water coolers for machine tools, Korean Journal of Air- Conditioning and Refrigeration Engineering, Vol. 24, No. 1, pp. 1-8. https://doi.org/10.6110/KJACR.2012.24.1.001
  5. ASHRAE Standard, 1975, Laboratory methods of testing fans for rating, ASHRAE Standard 37, pp. 51-75.
  6. Song, I. S., Choi, J. M., Joo, Y. J., Chung, H. J., Kang, H., and Kim, Y. C., 2008, The performance of a simultaneous heat and cooling heat pump at various charging conditions, Korean Journal of Air- Conditioning and Refrigeration Engineering, Vol. 20, No. 7, pp. 492-499.