References
- Oh, S. J., "Fundamentals of loundspeaker engineering," Seokhak-Dang, 2006.
- Hwang, G. Y., Kim, K. T., Chung, S. U., Hwang S. M., and Kang, B. S., "Analysis of a dynamic speaker in mobile phones by considering mechanical, electrical, and magnetic coupling effects," J. Appl. Phys., Vol. 91, No. 10, pp. 6979-6981, 2002. https://doi.org/10.1063/1.1456398
- Kwon, J. H., Kim, K. S., Bang, K. C., and Hwang S. M., "Analysis of total harmonic distortion in microspeaker considering coupling effect," Trans. Kor. Soc. Noise and Vib. Eng., Vol. 18, No. 4, pp. 473-479, 2008. https://doi.org/10.5050/KSNVN.2008.18.4.473
- Hwang, S. M., Lee, H. J., Hong, K. S., Kang, B. S., and Hwang, G. Y., "New development of combined permanent-magnet type microspeakers used for cellular phones," IEEE Trans. on Magn., Vol. 41, No. 5, pp. 2000-2003, 2005. https://doi.org/10.1109/TMAG.2005.846676
- Jung, K. I., Yi, H. R., Oh, S. J., and Yoon, S. W., "Behaviour of micro-loudspeaker diaphragms," J. Acc. Soc. Kor., Vol. 23, No. 2, pp. 499-502, 2004.
- Kim, S. K., Lee, T. H., and Lee, S. S., "Multidisciplinary design optimization for acoustic characteristics of a speaker diaphragm," Proc. 2004 Fall Conf. Kor. Soc. Noise Vib. Eng., Vol. 4, pp. 763- 766, 2004.
- Kim, W. C., Jang, G. W., and Kim, Y. Y., "Microspeaker diaphragm optimization for widening the operating frequency band and increasing sound pressure level," IEEE Trans. on Magn., Vol. 46, No. 1, pp. 59-66, 2010. https://doi.org/10.1109/TMAG.2009.2025271
- Yamaguchi, T., Saito, T., Nagai, K., Maruyama, S., Kurosawa, Y., and Matsumura, S., "Analysis of damped vibration for a viscoelastic block supported by a nonlinear concentrated spring using FEM," J. System Design Dynamics, Vol. 4, No. 1, pp. 154-165, 2011.
- Nam, G. J., Lee, C. B., and Kim, C. D., "A study on the small size loudspeaker for Hi-Fi low frequency sound reproduction," Trans. Kor. Soc. Noise and Vib. Eng., Vol. 20, No. 8, pp. 31-37, 2001.
- Hwang, S. M., Hwang, G. Y., Kwon, J. H., Lee, H. J., and Kang, B. S., "Performance comparison between circular and elliptical type microspeakers for cellular phones," IEEE Trans. on Magn., Vol. 39, No. 5, pp. 3256-3258, 2003. https://doi.org/10.1109/TMAG.2003.816740
- Lee, C. M., Kwon, J. H., Kim, K. S., Park, J. H., and Hwang, S. M., "Design and analysis of microspeakers to improve sound characteristics in a low frequency range," IEEE Trans. on Magn., Vol. 46, No. 6, pp. 2048-2051, 2010. https://doi.org/10.1109/TMAG.2010.2042793
- Lee, T. K., Kim, B. S., and Cho, T. J., "A study on the acoustical properties of micro-speaker according to comb teeth shape of the diaphragm," Trans. Kor. Soc. Mach. Tool Eng., Vol. 17, No. 6, pp. 124-131, 2008.
- ANSYS Inc, "ANSYS Multiphysics Release 12.0 User's Manual," 2009.
- Seo, Y. S. and Park, K., "Finite element analysis of an ultrasonic tool horn for pattern forming," J. Kor. Soc. Precis. Eng., Vol. 28, No. 3, pp. 363-369, 2011.
- Kim, K. M. and Park, K., "Vibration characteristics of micro-speaker diaphragm considering thermoforming effect," Proc. 5th Int. Conf. Manuf. Mach. Design Tribology, Page No. 166, 2013.
Cited by
- Numerical investigation on vibration characteristics of a micro-speaker diaphragm considering thermoforming effects vol.27, pp.10, 2013, https://doi.org/10.1007/s12206-013-0804-5
- Effect of Thickness Change in Corrugations on the Stiffness and Vibration Characteristics of a Thermoformed Diaphragm vol.23, pp.1, 2014, https://doi.org/10.5228/KSTP.2014.23.1.10
- Vibration and Acoustic Analysis of Balanced Armature Micro Speaker vol.26, pp.1, 2016, https://doi.org/10.5050/KSNVE.2016.26.1.005