DOI QR코드

DOI QR Code

몰드물성 종류 및 칩 크기 변화에 따른 웨이퍼 레벨 Sip에서의 열 피로 해석

Thermal Fatigue Analysis of Wafer Level Embedded SiP by Changing Mold Compounds and Chip Sizes

  • Jang, Chong Min (Department of Mechanical System Design Engineering, Seoul National University of Science & Technology) ;
  • Kim, Seong Keol (Department of Mechanical System Design Engineering, Seoul National University of Science & Technology)
  • 투고 : 2013.03.29
  • 심사 : 2013.05.08
  • 발행 : 2013.06.15

초록

This paper describes in detail the life prediction models and simulations of thermal fatigue under different mold compounds and chip sizes for wafer-level embedded SiP. Three-dimensional finite element models are built to simulate the viscoplastic behaviors for various mold compounds and chip sizes. In particular, the bonding parts between a mold and silicon nitride (Si3N4) are carefully modeled, and the strain distributions are studied. Three different chip sizes are used, and the effects of the mold compounds are observed. Through the numerical studies, it is found that type-C, which has a relatively lower Young's modulus and higher CTE, has a better fatigue life than the other mold compounds. In addition, the $4{\times}4$ chip has a shorter life than the $6{\times}6$ and $8{\times}8$ chips.

키워드

참고문헌

  1. Yoon, J. W., Kim, J. W., Koo, J. M., Ha, S. S., Noh, B. I., Moon, W. C., Moon, J. W., Jung, S. B., 2007, Flip-chip Bonding Technology and Reliability of Electronic Packaging, Journal of KWJS, 25:2 108-117. https://doi.org/10.5781/KWJS.2007.25.2.006
  2. Technology Trend of SiP (System-in-Pakage)., 2006, .
  3. Lall, P., Islam, M. N., Singh, N., Suhling, J. C, Darveaux, R., 2004, Lall, P., Islam, M. N., Singh, N., Suhling, J. C, and Darveaux, R., IEEE Transaction on Components and Packaging Technologies, 27:3 585-593. https://doi.org/10.1109/TCAPT.2004.831824
  4. Ng, H. S., Tee, T. Y., Goh, K. Y., Luan, J. E. Reinikainen, T., Hussa, E, Kujala, A., 2004, Absolute and Relative Fatigue Life Prediction Methodology for Virtual Qualification and Design Enhancement of Lead-free BGA., IEEE Electronic Components and Technology Conference, 1282-1291.
  5. Zhang, L., Sitaraman, R., Patwardhan, V., Nguyen, L., Kelkar, N., 2003, Solder Joint Reliability Model with Modified Darveaux's Equations for the micro SMD Wafer Level-Chip Scale Package Family., IEEE Electronic Components and Technology Conference, 572-577.
  6. Darveaux, R., 2000, Effect of simulation methodology on solder joint crack growth correlation., Proc. 50th ECTC, 1048-1063.
  7. Kim, S. K., Kim, J. Y., 2008, Study on the Prediction of Fatigue Life of BGA Typed Solder Joints., Journal of KSMTE, 17:1 137-143.