References
- Kwak, S. B., Kwak, S. L., Lee, H. Y., Yun, S. H., Kim, S. H., Lee, J. Y., 2011, Development of Door trim which applied integration process using eco Uni-material, Conference of KSAE. 2491-2497.
- Jung, B. J., Lee, K. H., 2010, Current Status of Countermeasure for Overcoming the International Environmental Regulations in Korea, CLEAN TECHNOLOGY. 16:3 155-161.
- Jeoung, S. K., Lee, P. C., Yoo, S. E., Kim, B. R., Im, M. H., Kang, W. G., 2011, Durability Improvement of Chlorine-Free Paint for Automotive Bumper Facia, Conference of KSAE. 2039-2042.
- Kim, M., Lee, J.J., Kim, D.Y., Park, S.U. Kwon, S.C., 2004, The Trend of Study of Echo-Friendly Hard Trivalent Chromium Deposition, Journal of KISE. 37:3 179-184.
- Kim, J. H., Lee, I. K., Lim, J. C., Cho, W. S., Woo, C. H., 2006, A Study on the improvement of uniformity of chromium plating thickness with Computer Simulation, Conference of KSAE. 1841-1848.
- Park, H. S., Kim, J. H., Tran, T. S., Dang, X. P., 2009, Development of Injection Molding Process for Radiator Grille with Chrome Metal Film Conference of KSME. 1266-1271.
- Kim, J. H., 2010, A Study on the Quality Improvement of Injection Molding Process for Radiator Grill with Metal Film Master Thesis, Ulsan University, Republic of Korea.
- Choi, H. J., Park, C. W., Choi, S. D., 2010, Analyses on Deformation Patterns Depending on the Injection Process for Rear Lamp Reflectors of Automotive, Journal of KSME. 9:4 32-37.
- Rhee, B. O., Tae, J. S., Choi, J. H., 2009, Injection Mold Cooling Circuit Optimization by Back-Propagation Algorithm, Journal of KSM. 18:4 430-435.
- Ahn, D. G., Park, M. W. Park, J. W., Kim, H. S., 2011, Determination of Molding Conditions of Double-Shot Injection Mold for the Computer Mouse via Three-Dimensional Injection Molding Analysis, Journal of KSME. 35:12 1619-1625. https://doi.org/10.3795/KSME-A.2011.35.12.1619
- Lee, S. H., Kim, W., Lee, H. S., Kim, J. D., 2005, The Effects of Injection Molding Parameters on Optical Properties of Light Guide Plates, Conference of KSME. 1711-1715.
- Park, C. H., Pyo, B.G., Koo, M. S., Cho, D. H., 2009, Design Optimization of Injection Molding Parts for Minimizing Injection Pressure and Preventing Weldlines, Conference of KSAE. 2553-2559.
- Lee, S. C., Lee, S. H., Lee, J. O., Park, H. Y., Lee, J. S., 2012, A Study of Injection Molding Process for Plastic Heald Part, Conference of KSMTE. 175.
- Kim, H. P., Kim, Y. J., 2001, Flow Analysis for an Effective Weld Line Control in Injection Molding, Journal of KSMT. 10:2 64-72.
- AMI Training Manual, 2010, Mold-flow Korean Manual 5th Edition, Autodesk Inc, Korea.
- Kim, H. P., Kim, Y. J. 2002, A Study on the Effects of Filling and Packing Phases on Injection Molding Process, Journal of KSMT. 11:4 44-53.
- Beaumont, J. P., Nagel, R., and Sherman, R. 2002, Successful Injection Molding, Hanser, UK.
Cited by
- Stiffness Evaluation of Hybrid Control Arm with Metal and Plastic Insert Injection vol.27, pp.6, 2013, https://doi.org/10.7735/ksmte.2018.27.6.511