참고문헌
- E. Gimenez, J. M. Lagaron, L. Cabedo, R. Gavara, J. J. Saura, 2004, Study of the Thermoformability of Ethylene-vinyl Alcohol Copolymer Based Barrier Blends of Interest in Food Packaging Applications, J. Appl. Poly. Sci., Vol. 96, No. 6, pp. 3851-3855.
- E. Gimenez, J. M. Lagaron, M. L. Maspoch, L. Cabedo, J. J. Saura, 2004, Uniaxial Tensile Behavior and Thermoforming Characteristics of High Barrier EVOH-Based Blends of Interest in Food Packaging, Polym. Eng. Sci., Vo. 44, No. 3, pp. 598-608. https://doi.org/10.1002/pen.20054
- S. Poller, W. Michaeli, 1992, Film Temperatures Determine the Wall Thickness of Thermoformed Parts, SPE ANTEC, Vol. 38, No. 1 , pp. 104-108.
- A. Aroujallan, M. O. Ngadi, J. P. Emond, 1997, Wall Thickness Distribution in Plug-assist Vacuum Formed Strawberry Containers, Polym. Eng. Sci., Vol. 37, No. 1, pp. 178-182. https://doi.org/10.1002/pen.11659
- S. C. Chen, S. T. Huang, M. C. Lin, R. D. Chien, 2008, Study on the Thermoforming of PC Films Used for In-Mold Decoration, Int. Commun. Heat Mass Transfer, Vol. 35, No. 8, pp. 967-973. https://doi.org/10.1016/j.icheatmasstransfer.2008.04.008
- G. Kim, K. Lee, S. Kang, 2009, Prediction of the Film Thickness Distribution and Pattern Change during Film Insert Thermoforming, Polym. Eng. Sci., Vol. 49, No. 11, pp. 2195-2203. https://doi.org/10.1002/pen.21467
- J. K. Lee, T. L. Virkler, C. E. Scott, 2001, Effects of Rheological Properties and Processing Parameters on ABS Thermoforming, Polym. Eng. Sci., Vol. 41, No. 2, pp. 240-261. https://doi.org/10.1002/pen.10725
- J. K. Lee, T. L. Virkler, C. E. Scott, 2001, Influence of Initial Sheet Temperature on ABS Thermoforming, Polym. Eng. Sci., Vol. 41, No. 10, pp. 1830-1844. https://doi.org/10.1002/pen.10880
- Y. G. Yoo, H. S. Lee, 2011, Effects of Processing Conditions on Thickness Distribution for a Laminated Film during Vacuum-Assisted Thermoforming, Trans. Mater. Process., Vol. 20, No. 3, pp. 250-256. https://doi.org/10.5228/KSTP.2011.20.3.250
- C. G'Sell, J. J. Jonas, 1979, Determination of the Plastic Behaviour of Solid Polymers at Constant True Strain Rate, J. Mater. Sci., Vol. 14, No. 3, pp. 583-591.
- C. G'Sell, N. A. Aly-Helal, J. J. Jonas, 1983, Effect of Stress Triaxiality on Neck Propagation during the Tensile Stretching of Solid Polymers, J. Mater. Sci., Vol. 18, No. 6, pp. 1731-1742. https://doi.org/10.1007/BF00542069
- C. G'Sell, N. A. Aly-Helal, S. L. Semiatin, J. J. Jonas, 1992, Influence of Deformation Defects on the Development of Strain Gradients during the Tensile Deformation of Polyethylene, Polym., Vol. 33, No. 6, pp. 1244-1254. https://doi.org/10.1016/0032-3861(92)90770-W
- B. Bernstein, E. A. Kearsley, L. J. Zapas, 1965, A Study of Stress Relaxation with Finite Strain, Rubber Chem. Technol., Vol. 38, No. 1, pp. 76-89. https://doi.org/10.5254/1.3535640
- Acuuform, 2005, Computer Simulations of Transforming and Blowing Molding, http://www.t-sim.com/index.html.
- M. H. Wagner, 1976, Analysis of Time-Dependent Non-Linear Stress-Growth Data for Shear and Elongational Flow of a Low-Density Branched Polyethylene Melt, Rheol. Acta., Vol. 15, No. 2, pp. 136-142. https://doi.org/10.1007/BF01517505
피인용 문헌
- Film Insert Molding of Automotive Door Grip Using Injection-Compression Molding vol.38, pp.7, 2014, https://doi.org/10.3795/KSME-A.2014.38.7.771