References
- Park, J. M., Choi, W. S., Kwon, S. H., Cha, J. H, "Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation", Journal of the KSMPE, Vol. 8, No. 4, pp. 48-53, 2009
- Lee, Y. M., Chang, S. I., Sun, J. W., Yun, J. H., "Chip Breaking Characteristics Depending on Equivalent Effective Rake Angle in Turning", Journal of KSMPE, Vol.2, No.2, pp.25-31, 2004
- Park, J. M., Choi, W. S., "Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation", Journal of the KSMPE, Vol. 8, No. 4, pp 48-53, 2009
- Song. Y. C., Park. C. H., "Control of tool Wear in Diamond Cutting of Steels by Intermittent Cutting Method", Journal of the KSPE, Vol. 25, No. 6, pp. 40-46, 2008
- Lee, J. W., Min, K. D., "A Study on Nozzle Flow and Spray Characteristics of Piezo Injector for Next Generation High Response Injection", Transactions Of the KSME(B), Vol. 30, No. 6, pp. 553-559, 2006
- Narendran, N., and Gu, Y., "Life of LED-based White Light Sources," Journal of Display Technology, Vol. 1, No. 1, pp. 167-171, 2005 https://doi.org/10.1109/JDT.2005.852510
- Sathe, S., Sammakia, B., "A Review of resent Developments in Some Practical Aspects of Air-Cooled Electronic package", Journal of heat transfer, Vol. 120, No. 4, pp.830-839, 1998 https://doi.org/10.1115/1.2825902
- A.K. da Silva, S. Lorente, A. Bejan, "Optimal Distribution of Discrete Heat Sources on a Plate with Laminar Forced Convection", International Journal of Heat and Mass Transfer, Vol 47, pp. 2139-2148, 2004 https://doi.org/10.1016/j.ijheatmasstransfer.2003.12.009