Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

A Study on the Thermal Effects Measurement and Uncertainty Estimation for High Precision Machine Tools

고정밀 공작기계의 열적효과 측정 및 불확도 추정에 관한 연구

  • Son, Deok-Soo (Dept. of Automated System, Gumi Campus of Korea Polytechnic) ;
  • Kim, Sang-Hwa (Dept. of Automated System, Gumi Campus of Korea Polytechnic) ;
  • Park, Il-Hwan (Korea University Of Technology & Education)
  • Published : 2013.04.30
⟨ Previous Next ⟩

Abstract

When the main spindle of high precision machine tools are run many hours, heat is generated in bearing parts of the inside of the spindle. Also, headstock is appeared distortion by inside and outside temperature difference of a machine. This paper studies method to measure behavior of machine tool about these thermal effects. In addition, it estimates measurement uncertainty factors which can be appeared in thermal effects measurement. Finding the factor of thermal affect measurement is important for estimation of measurement uncertainty. This paper measures thermal effects of high precision machine tools and evaluates the important factors of uncertainty.

Keywords

References

  1. Lim, Y. C., Kim, J. K., "A Study on the Thermal Specific of Operational Spindle System of Machine Tool" of Korean Society for Machine Tool Engineering, Autumn Conference, pp. 498-503, 2002.
  2. KS B ISO 230-3:2007,"Test Code for Machine Tools-part3 : Determination of Thermal Effects", 2007.
  3. KOLAS-G-002:2007, "Estimation of Uncertainty of Measurement Results and Guidelines for the Representation", Korea Laboratory Accreditation Scheme , 2007.
  4. Choi, J. H., "Measurement Uncertainty Evaluation", Han Rim Won, pp. 1-19, 2006
  5. Kb-C-C 58(4), "Comparison Test Introduction to Measurement Uncertainty," Korea Conformity Laboratories (KCL), 2007.
  6. Kwon, S. R., Kwon, S. H., "Measurement of Geometric Errors of an Ultra Precision mMT Using PSDs," Journal of the Korean Society of Mechanical Egineers, Vol. 35, No. 1, pp. 53-58, 2011.
  7. Kim, S. H., Kim, B. H., Choi, W. G., "A Study on the Measurement Method and Uncertainty Factors for Precision Inspection to Feed Unit of High Precision Machine Tool", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 4, pp. 55-61, 2012.
  8. Kim, S. H., Kim, B. H., Jin, Y. G., "A Study on the Rotation Accuracy According to Unbalance Variation of High Precision Spindle Unit for Machine Tool", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 3, pp. 174-181, 2012.