The Journal of Advanced Prosthodontics

  • 제5권2호
  • /
  • Pages.133-139
  • /
  • 2013
  • /
  • 2005-7806(pISSN)
  • /
  • 2005-7814(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

Effect of solution temperature on the mechanical properties of dual-cure resin cements

  • Kang, En-Sook (Department of Prosthodontics, School of Dentistry, Dental Research Institute, Pusan National University) ;
  • Jeon, Yeong-Chan (Department of Prosthodontics, School of Dentistry, Dental Research Institute, Pusan National University) ;
  • Jeong, Chang-Mo (Department of Prosthodontics, School of Dentistry, Dental Research Institute, Pusan National University) ;
  • Huh, Jung-Bo (Department of Prosthodontics, School of Dentistry, Dental Research Institute, Pusan National University) ;
  • Yun, Mi-Jung (Department of Prosthodontics, School of Dentistry, Dental Research Institute, Pusan National University) ;
  • Kwon, Yong-Hoon (Department of Dental Materials, School of Dentistry, Pusan National University)
  • 투고 : 2012.10.25
  • 심사 : 2013.05.22
  • 발행 : 2013.05.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSE. This study was to evaluate the effect of the solution temperature on the mechanical properties of dualcure resin cements. MATERIALS AND METHODS. For the study, five dual-cure resin cements were chosen and light cured. To evaluate the effect of temperature on the specimens, the light-cured specimens were immersed in deionized water at three different temperatures (4, 37 and $60^{\circ}C$) for 7 days. The control specimens were aged in a $37^{\circ}C$ dry and dark chamber for 24 hours. The mechanical properties of the light-cured specimens were evaluated using the Vickers hardness test, three-point bending test, and compression test, respectively. Both flexural and compressive properties were evaluated using a universal testing machine. The data were analyzed using a two way ANOVA with Tukey test to perform multiple comparisons (${\alpha}$=0.05). RESULTS. After immersion, the specimens showed significantly different microhardness, flexural, and compressive properties compared to the control case regardless of solution temperatures. Depending on the resin brand, the microhardness difference between the top and bottom surfaces ranged approximately 3.3-12.2%. Among the specimens, BisCem and Calibra showed the highest and lowest decrease of flexural strength, respectively. Also, Calibra and Multilink Automix showed the highest and lowest decrease of compressive strength, respectively compared to the control case. CONCLUSION. The examined dual-cure resin cements had compatible flexural and compressive properties with most methacrylate-based composite resins and the underlying dentin regardless of solution temperature. However, the effect of the solution temperature on the mechanical properties was not consistent and depended more on the resin brand.

키워드

참고문헌

  1. Goracci C, Cury AH, Cantoro A, Papacchini F, Tay FR, Ferrari M. Microtensile bond strength and interfacial properties of self-etching and self-adhesive resin cements used to lute composite onlays under different seating forces. J Adhes Dent 2006;8:327-335.
  2. Yang B, Ludwig K, Adelung R, Kern M. Micro-tensile bond strength of three luting resins to human regional dentin. Dent Mater 2006;22:45-56. https://doi.org/10.1016/j.dental.2005.02.009
  3. De Munck J, Vargas M, Van Landuyt K, Hikita K, Lambrechts P, Van Meerbeek B. Bonding of an auto-adhesive luting material to enamel and dentin. Dent Mater 2004;20: 963-971. https://doi.org/10.1016/j.dental.2004.03.002
  4. Uy JN, Lian JN, Nicholls JI, Tan KB. Load-fatigue performance of gold crowns luted with resin cements. J Prosthet Dent 2006;95:315-322. https://doi.org/10.1016/j.prosdent.2006.01.016
  5. Pace LL, Hummel SK, Marker VA, Bolouri A. Comparison of the flexural strength of five adhesive resin cements. J Prosthodont 2007;16:18-24. https://doi.org/10.1111/j.1532-849X.2006.00151.x
  6. Lee IB, An W, Chang J, Um CM. Influence of ceramic thickness and curing mode on the polymerization shrinkage kinetics of dual-cured resin cements. Dent Mater 2008;24:1141-1147. https://doi.org/10.1016/j.dental.2008.03.015
  7. Cattani-Lorente MA, Dupuis V, Payan J, Moya F, Meyer JM. Effect of water on the physical properties of resin-modified glass ionomer cements. Dent Mater 1999;15:71-78. https://doi.org/10.1016/S0109-5641(99)00016-0
  8. el-Badrawy WA, el-Mowafy OM. Chemical versus dual curing of resin inlay cements. J Prosthet Dent 1995;73:515-524. https://doi.org/10.1016/S0022-3913(05)80109-X
  9. Barghi N, McAlister EH. LED and halogen lights: effect of ceramic thickness and shade on curing luting resin. Compend Contin Educ Dent 2003;24:497-500; 502; 504
  10. Jung H, Friedl KH, Hiller KA, Haller A, Schmalz G. Curing efficiency of different polymerization methods through ceramic restorations. Clin Oral Investig 2001;5:156-161. https://doi.org/10.1007/s007840100118
  11. Park SH, Kim SS, Cho YS, Lee CK, Noh BD. Curing units' ability to cure restorative composites and dual-cured composite cements under composite overlay. Oper Dent 2004; 29:627-635.
  12. Hofmann N, Papsthart G, Hugo B, Klaiber B. Comparison of photo-activation versus chemical or dual-curing of resinbased luting cements regarding flexural strength, modulus and surface hardness. J Oral Rehabil 2001;28:1022-1028. https://doi.org/10.1046/j.1365-2842.2001.00809.x
  13. Rueggeberg FA, Caughman WF, Curtis JW Jr. Effect of light intensity and exposure duration on cure of resin composite. Oper Dent 1994;19:26-32.
  14. Witzel MF, Braga RR, Singer Jde M, Azevedo CL. Bond strength between polymer resin-based cement and porcelaindentin surfaces: influence of polymerization mode and early cyclic loading. Int J Prosthodont 2003;16:145-149.
  15. Spierings TA, Peters MC, Bosman F, Plasschaert AJ. Verification of theoretical modeling of heat transmission in teeth by in vivo experiments. J Dent Res 1987;66:1336-1339. https://doi.org/10.1177/00220345870660080901
  16. Airoldi G, Riva G, Vanelli M, Filippi V, Garattini G. Oral environment temperature changes induced by cold/hot liquid intake. Am J Orthod Dentofacial Orthop 1997;112:58-63. https://doi.org/10.1016/S0889-5406(97)70274-9
  17. Cantoro A, Goracci C, Papacchini F, Mazzitelli C, Fadda GM, Ferrari M. Effect of pre-cure temperature on the bonding potential of self-etch and self-adhesive resin cements. Dent Mater 2008;24:577-583. https://doi.org/10.1016/j.dental.2007.06.012
  18. Cantoro A, Goracci C, Carvalho CA, Coniglio I, Ferrari M. Bonding potential of self-adhesive luting agents used at different temperatures to lute composite onlays. J Dent 2009;37: 454-461. https://doi.org/10.1016/j.jdent.2009.02.006
  19. ISO 4049: Dentistry - Polymer-based restorative materials. ISO; Geneva; Switzerland, 2009.
  20. Chung KH, Greener EH. Correlation between degree of conversion, filler concentration and mechanical properties of posterior composite resins. J Oral Rehabil 1990;17:487-494. https://doi.org/10.1111/j.1365-2842.1990.tb01419.x
  21. Asmussen E, Peutzfeldt A. Influence of UEDMA BisGMA and TEGDMA on selected mechanical properties of experimental resin composites. Dent Mater 1998;14:51-56. https://doi.org/10.1016/S0109-5641(98)00009-8
  22. Floyd CJ, Dickens SH. Network structure of Bis-GMA- and UDMA-based resin systems. Dent Mater 2006;22:1143-1149. https://doi.org/10.1016/j.dental.2005.10.009
  23. Musanje L, Ferracane JL. Effects of resin formulation and nanofiller surface treatment on the properties of experimental hybrid resin composite. Biomaterials 2004;25:4065-4071. https://doi.org/10.1016/j.biomaterials.2003.11.003
  24. Mayworm CD, Camargo SS Jr, Bastian FL. Influence of artificial saliva on abrasive wear and microhardness of dental composites filled with nanoparticles. J Dent 2008;36:703-710. https://doi.org/10.1016/j.jdent.2008.05.001
  25. Zeng K, Odén A, Rowcliffe D. Flexure tests on dental ceramics. Int J Prosthodont 1996;9:434-439.
  26. Bona AD, Anusavice KJ, DeHoff PH. Weibull analysis and flexural strength of hot-pressed core and veneered ceramic structures. Dent Mater 2003;19:662-669. https://doi.org/10.1016/S0109-5641(03)00010-1
  27. Mecholsky JJ Jr. Fracture mechanics principles. Dent Mater 1995;11:111-112. https://doi.org/10.1016/0109-5641(95)80044-1
  28. Ilie N, Hickel R. Investigations on mechanical behaviour of dental composites. Clin Oral Investig 2009;13:427-438. https://doi.org/10.1007/s00784-009-0258-4
  29. Xu HH, Smith DT, Jahanmir S, Romberg E, Kelly JR, Thompson VP, Rekow ED. Indentation damage and mechanical properties of human enamel and dentin. J Dent Res 1998;77:472-480. https://doi.org/10.1177/00220345980770030601
  30. Mahoney E, Holt A, Swain M, Kilpatrick N. The hardness and modulus of elasticity of primary molar teeth: an ultramicro- indentation study. J Dent 2000;28:589-594. https://doi.org/10.1016/S0300-5712(00)00043-9
  31. Craig RG, Peyton FA. Elastic and mechanical properties of human dentin. J Dent Res 1958;37:710-718. https://doi.org/10.1177/00220345580370041801
  32. Watts DC, el Mowafy OM, Grant AA. Temperaturedependence of compressive properties of human dentin. J Dent Res 1987;66:29-32. https://doi.org/10.1177/00220345870660010601