DOI QR코드

DOI QR Code

The effect of acrylamide incorporation on the thermal and physical properties of denture resins

  • Ayaz, Elif Aydogan (Department of Prosthodontics, Faculty of Dentistry, Karadeniz Technical University) ;
  • Durkan, Rukiye (Department of Prosthodontics, Faculty of Dentistry, Afyon Kocatepe University) ;
  • Bagis, Bora (Department of Prosthodontics, Faculty of Dentistry, Katip Celebi University)
  • 투고 : 2012.10.18
  • 심사 : 2013.04.26
  • 발행 : 2013.05.31

초록

PURPOSE. Polymethyl methacrylate (PMMA) is the most commonly used denture base material despite typically low in strength. The purpose of this study was to improve the physical properties of the PMMA based denture base resins (QC-20, Dentsply Ltd., Addlestone, UK; Stellon, AD International Ltd, Dentsply, Switzerland; Acron MC; GC Lab Technologies Inc., Alsip, Japan) by copolymerization mechanism. MATERIALS AND METHODS. Control group specimens were prepared according to the manufacturer recommendations. In the copolymer groups; resins were prepared with 5%, 10%, 15% and 20% acrylamide (AAm) (Merck, Hohenbrunn, Germany) content according to the moleculer weight ratio, respectively. Chemical structure was characterized by a Bruker Vertex-70 Fourier transform infrared spectroscopy (FTIR) (Bruker Optics Inc., Ettlingen, Germany). Hardness was determined using an universal hardness tester (Struers Duramin, Struers A/S, Ballerup, Denmark) equipped with a Vickers diamond penetrator. The glass transition temperature ($T_g$) of control and copolymers were evaluated by Perkin Elmer Diamond DSC (Perkin Elmer, Massachusetts,USA). Statistical analyses were carried out using the statistical package SPSS for Windows, version 15.0 (SPSS, Chicago, IL, USA). The results were tested regarding the normality of distribution with the Shapiro Wilk test. Data were analyzed using ANOVA with post-hoc Tukey test (P<.01). RESULTS. The copolymer synthesis was confirmed by FTIR spectroscopy. Glass transition temperature of the copolymer groups were higher than the control groups of the resins. The 10%, 15% and 20% copolymer groups of Stellon presented significantly higher than the control group in terms of hardness. 15% and 20% copolymer groups of Acron MC showed significantly higher hardness values when compared to the control group of the resin. Acrylamide addition did not affect the hardness of the QC-20 resin significantly. CONCLUSION. Within the limitation of this study, it can be concluded that copolymerization of PMMA with AAm increased the hardness value and glass transition temperature of PMMA denture base resins.

키워드

참고문헌

  1. Petersen PE, Bourgeois D, Ogawa H, Estupinan-Day S, Ndiaye C. The global burden of oral diseases and risks to oral health. Bull World Health Organ 2005;83:661-669.
  2. Tang AT, Li J, Ekstrand J, Liu Y. Cytotoxicity tests of in situ polymerized resins: methodological comparisons and introduction of a tissue culture insert as a testing device. J Biomed Mater Res 1999;45:214-222. https://doi.org/10.1002/(SICI)1097-4636(19990605)45:3<214::AID-JBM9>3.0.CO;2-Y
  3. Rached RN, Del-Bel Cury AA. Heat-cured acrylic resin repaired with microwave-cured one: bond strength and surface texture. J Oral Rehabil 2001;28:370-375. https://doi.org/10.1046/j.1365-2842.2001.00666.x
  4. Wolfaardt JF, Cleaton-Jones P, Fatti P. The occurrence of porosity in a heat-cured poly (methyl methacrylate) denture base resin. J Prosthet Dent 1986;55:393-400. https://doi.org/10.1016/0022-3913(86)90128-9
  5. Honorez P, Catalan A, Angnes U, Grimonster J. The effect of three processing cycles on some physical and chemical properties of a heat-cured acrylic resin. J Prosthet Dent 1989;61:510-517. https://doi.org/10.1016/0022-3913(89)90025-5
  6. Nishii M. Curing of denture base resins with microwave irradiation: with particular reference to heat-curing resins. J Osaka Dent Univ 1968;2:23-40.
  7. Barbosa DB, Monteiro DR, Barão VA, Pero AC, Compagnoni MA. Effect of monomer treatment and polymerisation methods on the bond strength of resin teeth to denture base material. Gerodontology 2009;26:225-231. https://doi.org/10.1111/j.1741-2358.2008.00262.x
  8. Jacob J, Chia LHL, Boey FYC. Comparative study of methyl methacrylate cure by microwave radiation versus thermal energy. Polym Test 1995;14:343-354. https://doi.org/10.1016/0142-9418(94)00034-C
  9. Smith LT, Powers JM, Ladd D. Mechanical properties of new denture resins polymerized by visible light, heat, and microwave energy. Int J Prosthodont 1992;5:315-320.
  10. De Clerck JP. Microwave polymerization of acrylic resins used in dental prostheses. J Prosthet Dent 1987;57:650-658. https://doi.org/10.1016/0022-3913(87)90353-2
  11. Jerolimov V, Brooks SC, Huggett R, Bates JF. Rapid curing of acrylic denture-base materials. Dent Mater 1989;5:18-22. https://doi.org/10.1016/0109-5641(89)90086-9
  12. Usanmaz A, Ateş J, Doğan A. Thermal and Mechanical Properties of Microwave- and Heat-Cured Poly(methyl methacrylate) Used as Dental Base Material. J Appl Polym Sci 2003;90:251-256. https://doi.org/10.1002/app.12681
  13. Bural C, Aktaş E, Deniz G, Ünlüçerçi Y, Bayraktar G. Effect of leaching residual methyl methacrylate concentrations on in vitro cytotoxicity of heat polymerized denture base acrylic resin processed with different polymerization cycles. J Appl Oral Sci 2011;19:306-312.
  14. Takahashi T, Gonda T, Maeda Y. Influence of reinforcing materials on strain of maxillary complete denture. Acta Odontol Scand 2013;71:307-311. https://doi.org/10.3109/00016357.2012.680903
  15. Beyli MS, von Fraunhofer JA. An analysis of causes of fracture of acrylic resin dentures. J Prosthet Dent 1981;46:238-241 https://doi.org/10.1016/0022-3913(81)90206-7
  16. Jagger DC, Harrison A, Jandt KD. The reinforcement of dentures. J Oral Rehabil 1999;26:185-194. https://doi.org/10.1046/j.1365-2842.1999.00375.x
  17. Cunha TR, Regis RR, Bonatti MR, de Souza RF. Influence of incorporation of fluoroalkyl methacrylates on roughness and flexural strength of a denture base acrylic resin. J Appl Oral Sci 2009;17:103-107.
  18. Moszner N, Fischer UK, Angermann J, Rheinberger V. Bis- (acrylamide)s as new cross-linkers for resin-based composite restoratives. Dent Mater 2006;22:1157-1162. https://doi.org/10.1016/j.dental.2005.11.032
  19. Umemoto K, Kurata S. Basic study of a new denture base resin applying hydrophobic methacrylate monomer. Dent Mater J 1997;16:21-30. https://doi.org/10.4012/dmj.16.21
  20. Umemoto K, Kurata S, Morishita K, Kawase T. Basic study of a new soft resin applied with bisfunctional siloxane oligomer. Dent Mater J 2007;26:656-658. https://doi.org/10.4012/dmj.26.656
  21. Mortimer DA. Synthetic polyelectrolytes- A review. Polym Int 1991;25:29-41. https://doi.org/10.1002/pi.4990250107
  22. Friedman M. Chemistry, biochemistry, and safety of acrylamide. A review. J Agric Food Chem 2003;51:4504-4526. https://doi.org/10.1021/jf030204+
  23. Pinto Lde R, Acosta EJ, Távora FF, da Silva PM, Porto VC. Effect of repeated cycles of chemical disinfection on the roughness and hardness of hard reline acrylic resins. Gerodont 2010;27:147-153.
  24. Philips RW. Science of Dental Materials. 9th ed. Philadelphia, W.B. Saunders Co; 1991. p. 15-35.
  25. Ping Chaing BK. Polymers in the service of prosthetic dentistry. J Dent 1984;12:203-214. https://doi.org/10.1016/0300-5712(84)90063-0
  26. The Japan Society of Calorimetry and Thermal Analysis, Sorai M. Comprehensive Handbook of Calorimetry and Thermal Analysis. J. Wiley; 2004.
  27. Aouachria K, Bensemra NB. Miscibility of PVC/PMMA blends by vicat softening temperature, viscometry, DSC and FTIR analysis. Polym Test 2006;25:1101-1108. https://doi.org/10.1016/j.polymertesting.2006.07.007
  28. Vuorinen AM, Dyer SR, Lassila LV, Vallittu PK. Effect of rigid rod polymer filler on mechanical properties of polymethyl methacrylate denture base material. Dent Mater 2008;24:708-713. https://doi.org/10.1016/j.dental.2007.07.003
  29. Puri G, Berzins DW, Dhuru VB, Raj PA, Rambhia SK, Dhir G, Dentino AR. Effect of phosphate group addition on the properties of denture base resins. J Prosthet Dent 2008; 100:302-308. https://doi.org/10.1016/S0022-3913(08)60210-3
  30. Pavlinec J, Moszner N. Monomers for Adhesive Polymers, 8a Crosslinking Polymerization of Selected N-Substituted bis(Acrylamide)s for Dental Filling Materials. J Appl Polym Sci. 2009;113:3137-3145. https://doi.org/10.1002/app.30188
  31. Pai RK, Ng JB, Pillai S, Bergström L, Hedin N. Temperatureinduced formation of strong gels of acrylamide-based polyelectrolytes. J Colloid Interface Sci 2009;337:46-53. https://doi.org/10.1016/j.jcis.2009.05.021
  32. Hacker MC, Klouda L, Ma BB, Kretlow JD, Mikos AG. Synthesis and characterization of injectable,thermally and chemically gelable, amphiphilic poly(N-isopropylacrylamide)- based macromers. Biomacromolecules 2008;9:1558-1570. https://doi.org/10.1021/bm8000414
  33. Bhattacharya A, Rawlins J, Ray P. Polymer grafting and crosslinking. Wiley; 2009.
  34. Azevedo A, Machado AL, Vergani CE, Giampaolo ET, Pavarina AC. Hardness of denture base and hard chair-side reline acrylic resins. J Appl Oral Sci 2005;13:291-295. https://doi.org/10.1590/S1678-77572005000300017
  35. Rueggeberg FA, Craig RG. Correlation of parameters used to estimate monomer conversion in a light-cured composite. J Dent Res 1988;67:932-937. https://doi.org/10.1177/00220345880670060801
  36. Rodford RA. Further development and evaluation of high impact strength denture base materials. J Dent 1990;18:151-157. https://doi.org/10.1016/0300-5712(90)90056-K
  37. Ruyter IE, Svendsen SA. Flexural properties of denture base polymers. J Prosthet Dent 1980;43:95-104. https://doi.org/10.1016/0022-3913(80)90362-5
  38. Blagojevic V, Murphy VM. Microwave polymerization of denture base materials. A comparative study. J Oral Rehabil 1999;26:804-808. https://doi.org/10.1046/j.1365-2842.1999.00456.x
  39. Sperling LH. Introduction to physical polymer science. Wiley; 1986.
  40. Neppelenbroek KH, Pavarina AC, Vergani CE, Giampaolo ET. Hardness of heat-polymerized acrylic resins after disinfection and long-term water immersion. J Prosthet Dent 2005;93:171-176. https://doi.org/10.1016/j.prosdent.2004.10.020
  41. Rao S, Rao GK. Cure studies on bifunctional epoxy matrices using a domestic microwave oven. Polym Test 2008;27:645-652 https://doi.org/10.1016/j.polymertesting.2008.04.005

피인용 문헌

  1. Microstructural characterization and evaluation of the properties of polymeric materials for maxillofacial prosthetics vol.38, pp.2, 2014, https://doi.org/10.3109/03091902.2013.864715
  2. Characterization and bacterial anti-adherent effect on modified PMMA denture acrylic resin containing platinum nanoparticles vol.6, pp.3, 2014, https://doi.org/10.4047/jap.2014.6.3.207
  3. Evaluation the Vickers Hardness of Denture Base Materials vol.06, pp.04, 2016, https://doi.org/10.4236/ojst.2016.64014
  4. Flexural and Surface Properties of PMMA Denture Base Material Modified with Thymoquinone as an Antifungal Agent pp.1059941X, 2018, https://doi.org/10.1111/jopr.12967
  5. Effect of Henna Addition on the Surface Roughness and Hardness of Polymethylmethacrylate Denture Base Material: An in vitro Study vol.19, pp.6, 2018, https://doi.org/10.5005/jp-journals-10024-2327
  6. Comparison of Beta and ANB Angles for Evaluation of Sagittal Skeletal Discrepancy: A Cephalometric Study vol.19, pp.6, 2013, https://doi.org/10.5005/jp-journals-10024-2328
  7. Comparative Study of the Efficacy of 4% Articaine vs 2% Lidocaine in Surgical Removal of Bilaterally Impacted Mandibular Third Molars vol.19, pp.6, 2018, https://doi.org/10.5005/jp-journals-10024-2329
  8. Veneer or Interproximal Enamel Reduction? vol.19, pp.6, 2013, https://doi.org/10.5005/jp-journals-10024-2330
  9. Flexural strength of polymethyl methacrylate copolymers as a denture base resin vol.38, pp.4, 2013, https://doi.org/10.4012/dmj.2018-393
  10. Complex formation in the Fe(II)-Fe(III)-acrylamide-water system and chemical models vol.73, pp.7, 2013, https://doi.org/10.1080/00958972.2020.1766682
  11. Mechanical, Surface, and Optical Properties of PMMA Denture Base Material Modified with Azadirachta indica as an Antifungal Agent vol.22, pp.6, 2013, https://doi.org/10.5005/jp-journals-10024-3103
  12. Influence of Reinforcing Agents on the Mechanical Properties of Denture Base Resin: A Systematic Review vol.13, pp.18, 2013, https://doi.org/10.3390/polym13183083