Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Optimal Design of Magnetorheological Mount for Ship Engines : Maximum Damping Force

선박용 엔진 MR 마운트의 최적설계: 최대 댐핑력

  • Received : 2013.03.29
  • Accepted : 2013.04.30
  • Published : 2013.05.20
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents optimal design procedures of mount based on a magnetorheological(MR) fluid to isolate the vibration in heavy diesel engine system. At first, frequency response and force-displacement transmissibility methods are used to get required damping force that is necessary for effective vibration isolation. From this result, a new type of high damping force engine mount is proposed and the governing equation of Bingham plastic behavior of MR fluid in flow path is mathematically derived under cylindrical coordinates. Finally, parametric design optimization featuring finite element is performed using ANSYS software to get the required damping force in MR mount system which can be used to reduce engine vibration. Damping force of the MR mount is then determined as an objective function in this analysis based on ANSYS. Furthermore, Magnetic analysis is then applied in this process.

Keywords

References

  1. Kim, W. H., Joo, W. H. and Kim, D. H., 2012, Development of Stiffness Adjustable Mount for Vibration Control of Marine Diesel Generator Set, Proceedings of the KSNVE Annual Spring Conference, pp. 89-92.
  2. Hong, S. R. and Choi, S. B., 2005, Vibration Control of a Structural System Using MR Fluid Mount, Journal of Intelligent Material System and Structures, Vol. 16, No. 11-12, pp. 931-936. https://doi.org/10.1177/1045389X05053917
  3. Tsouroukdissian, A. R., Ikhowane, F., Rodellar, J. and Luo, N., 2009, Modeling and Identification of a Small-scale Magnetorheological Damper, Journal of Intelligent Material Systems and Structures, Vol. 20, No. 7, pp. 825-835. https://doi.org/10.1177/1045389X08098440
  4. Spencer Jr., B. F., Dyke, S. J., Sain, M. K. and Carlson, J. D., 1997, Phenomenological Model for a Magnetorheological Damper, Journal of Engineering Mechanics, Vol. 123, No. 3, pp. 230-238. https://doi.org/10.1061/(ASCE)0733-9399(1997)123:3(230)
  5. Do, X. P., Park, J. H., Woo, J. K. and Choi, S. B., 2012, Optimal Design of New MR Mount for Diesel Engine of Ship, Proceedings of the KSNVE Annual Autumn Conference, pp. 93-99.
  6. Jolly, M R, Bender, J. W. and Carlson, J. D., 1998, Properties and Applications of Commercial Magneto Rheological Fluids, Proceedings of the SPIE's 5th Annual Symposium on Smart Stuctures and Materials, Vol. 3327, pp. 262-275.
  7. Lee, D. Y. and Choi, S. B., 2010, Control of Active Engine Mount System Featuring MR Fluid and Piezostack via HILS, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 20, No. 2, pp. 122-128. https://doi.org/10.5050/KSNVE.2010.20.2.122

Cited by

  1. vol.17, pp.2, 2014, https://doi.org/10.5293/kfma.2014.17.2.073