Transactions of the Korean Society for Noise and Vibration Engineering (한국소음진동공학회논문집)

The Korean Society for Noise and Vibration Engineering (한국소음진동공학회)
권호 표지
DOI QR코드

DOI QR Code

Characteristics of Friction Noise with Respect to Friction Curve

마찰 곡선에 따른 마찰 소음 특성

  • Nam, Jaehyun (Division of Automotive & Mechanical Engineering, Kongju National University) ;
  • Kang, Jaeyoung (Division of Automotive & Mechanical Engineering, Kongju National University)
  • Received : 2013.02.20
  • Accepted : 2013.04.03
  • Published : 2013.05.20
Download PDF
⟨ Previous Next ⟩

Abstract

The characteristics of friction noise due to the friction-velocity curve is experimentally investigated through the pin-on-disk setup. The rotation speed of the disk is controlled in order to produce the sliding speed variation. Then, the friction coefficient and the corresponding friction noise are simultaneously measured with respect to the sliding speed between the steel disk and aluminum pin. The experimental results show that the negative friction-velocity slope is essential in generating friction noise.

Keywords

References

  1. Jibiki, T., Shima, M., Akita, H. and Tamura, M., 2001, A Basic Study of Friction Noise Caused by Fretting, Wear, Vol. 251, No. 1-12, pp. 1492-1503. https://doi.org/10.1016/S0043-1648(01)00792-X
  2. Chen, G., Zhou, Z., Philippe, K. and Leo, V., 2001, Effect of Surface Topography on Formation of Squeal under Reciprocating Sliding, Wear, Vol. 253, No. 3-4, pp. 411-423.
  3. Kang, J., 2010, Tilting Effect of Automotive Seat System on Squeak Noise, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 20, No. 6, pp. 577-582. https://doi.org/10.5050/KSNVE.2010.20.6.577
  4. Kang, J., Krousgrill, C. and Sadeghi, F., 2009, Wave Pattern Motion and Stick-slip Limit Cycle Oscillation of a Disc Brake, Journal of Sound and Vibration, Vol. 325, No. 3, pp. 552-564. https://doi.org/10.1016/j.jsv.2009.03.030
  5. Suh, N. and Sin, H., 1981, The Genesis of Friction, Wear, Vol. 69, No. 1, pp. 91-114. https://doi.org/10.1016/0043-1648(81)90315-X
  6. Nogueira, I., Dias, A., Gras, R. and Progri, R., 2002, An Experimental Model for Mixed Friction during Running-in, Wear, Vol. 253, No. 5-6, pp. 541-549. https://doi.org/10.1016/S0043-1648(02)00065-0
  7. Ostvik, R. and Christensen, H., 1968/1969, Changes in Surface Topography with Running-in, in: Proceeding of the Tribology Convention(Part 3P), Vol. 183, pp. 57-65.
  8. Pawlus, P., 1994, An Study on the Functional Proprieties of Honed Cylinders Surface during Running-in, Wear, Vol. 176, No. 5-6, pp. 247-254. https://doi.org/10.1016/0043-1648(94)90153-8
  9. Andersson, P., Juhanko, J., Nikkila, A. and Lintula, P., 1996, Influence of Topography on the Running-in of Water-lubricated Silicon Carbide Journal Bearings, Wear, Vol. 201, No. 1-2, pp. 1-9. https://doi.org/10.1016/S0043-1648(95)06815-5
  10. Kang, J., 2012, Effect of Friction Curve on Brake Squeal Propensity, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 2, pp. 163-169. https://doi.org/10.5050/KSNVE.2012.22.2.163
  11. Nam, J. and Kang, J., 2012, A Basic Experimental Study on the Squeak Noise Using the Pin-on-disk, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 8, pp. 736-741. https://doi.org/10.5050/KSNVE.2012.22.8.736
  12. Nam, J. and Kang, J., 2012, Unstable Brake Pad Mode due to Friction-velocity Slope, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 22, No. 12, pp. 1206-1212. https://doi.org/10.5050/KSNVE.2012.22.12.1206
  13. Spikes, H. and Olver, A., 2003, Basics of Mixed Lubrication, Lubrication Science, Vol. 16, No. 1, pp. 1-28. https://doi.org/10.1002/ls.3010160102

Cited by

  1. Investigation of Friction Noise with Respect to Friction Curve by Using FEM and Its Validation vol.24, pp.1, 2014, https://doi.org/10.5050/KSNVE.2014.24.1.028
  2. Characteristics of Friction Noise with Changes of the Natural Frequencies in the Reciprocating Motion vol.24, pp.4, 2014, https://doi.org/10.5050/KSNVE.2014.24.4.332
  3. Squeal Noise Reduction of an Automobile Wiper Blade vol.24, pp.5, 2014, https://doi.org/10.5050/KSNVE.2014.24.5.374
  4. An Experimental Investigation of the Effect of Corrosion on Dry Friction Noise vol.39, pp.12, 2015, https://doi.org/10.3795/KSME-A.2015.39.12.1251
  5. Investigation of Hip Squeak Using Finite Element Modeling with a Friction Curve vol.40, pp.1, 2016, https://doi.org/10.3795/KSME-A.2016.40.1.033