DOI QR코드

DOI QR Code

FE analysis of RC structures using DSC model with yield surfaces for tension and compression

  • Akhaveissy, A.H. (Department of Civil Engineering, Faculty Engineering, Razi University) ;
  • Desai, C.S. (Department of Civil Engineering and Engineering Mechanics, University of Arizona) ;
  • Mostofinejad, D. (Department of Civil Engineering, Isfahan University of Technology) ;
  • Vafai, A. (Department of Civil Engineering, Sharif University of Technology)
  • 투고 : 2011.04.04
  • 심사 : 2012.05.21
  • 발행 : 2013.02.25

초록

The nonlinear finite element method with eight noded isoparametric quadrilateral element for concrete and two noded element for reinforcement is used for the prediction of the behavior of reinforcement concrete structures. The disturbed state concept (DSC) including the hierarchical single surface (HISS) plasticity model with associated flow rule with modifications is used to characterize the constitutive behavior of concrete both in compression and in tension which is named DSC/HISS-CT. The HISS model is applied to shows the plastic behavior of concrete, and DSC for microcracking, fracture and softening simulations of concrete. It should be noted that the DSC expresses the behavior of a material element as a mixture of two interacting components and can include both softening and stiffening, while the classical damage approach assumes that cracks (damage) induced in a material treated acts as a void, with no strength. The DSC/HISS-CT is a unified model with different mechanism, which expresses the observed behavior in terms of interacting behavior of components; thus the mechanism in the DSC is much different than that of the damage model, which is based on physical cracks which has no strength and interaction with the undamaged part. This is the first time the DSC/HISS-CT model, with the capacity to account for both compression and tension yields, is applied for concrete materials. The DSC model allows also for the characterization of non-associative behavior through the use of disturbance. Elastic perfectly plastic behavior is assumed for modeling of steel reinforcement. The DSC model is validated at two levels: (1) specimen and (2) practical boundary value problem. For the specimen level, the predictions are obtained by the integration of the incremental constitutive relations. The FE procedure with DSC/HISS-CT model is used to obtain predictions for practical boundary value problems. Based on the comparisons between DSC/HISS-CT predictions, test data and ANSYS software predictions, it is found that the model provides highly satisfactory predictions. The model allows computation of microcracking during deformation leading to the fracture and failure; in the model, the critical disturbance, Dc, identifies fracture and failure.

키워드

참고문헌

  1. Akhaveissy, A.H., Desai, C.S., Sadrnejad, S.A. and Shakib, H. (2009), "Implementation and comparison of generalized plasticity and disturbed state concept for load-deformation behavior of foundation", Sci. Iran. J. Trans. A Civil Eng., 16, 189-198.
  2. Assan, A.E. (2002), "Nonlinear analysis of reinforced concrete cylindrical shells", Comput. Struct., 80(27- 30), 2177-2184. https://doi.org/10.1016/S0045-7949(02)00245-6
  3. Bathe, K.J. (1996), Finite element procedures, Prentice-Hall, Inc., Upper Saddle River, New Jersey, USA.
  4. Bazant, Z.P. and Shieh, C.L. (1978), "Endochronic model for nonlinear triaxial behavior of concrete", Nucl. Eng. Des., 47(2), 305-315. https://doi.org/10.1016/0029-5493(78)90074-2
  5. Bazant, Z.P. and Luzio, G.D. (2004), "Nonlocal microplane model with strain-softening yield limits", Int. J. Solids Struct., 41(24-25), 7209-7240. https://doi.org/10.1016/j.ijsolstr.2004.05.065
  6. Carol, I., Part, P. and Bazant, Z.P. (1992), "New Explicit microplane model for concrete: theoretical aspects and numerical implementation", Int. J. Solids Struct., 29(9), 1173-1191. https://doi.org/10.1016/0020-7683(92)90141-F
  7. Cervera, M., Hinton, E. and Hassan, O. (1987), "Nonlinear analysis of reinforced concrete plate and shell structures using 20-noded isoparametric brick elements", Comput. Struct., 25(6), 845-869. https://doi.org/10.1016/0045-7949(87)90200-8
  8. Coronado, C.A. and Lopez, M.M. (2006), "Sensitivity analysis of reinforced concrete beams strengthened with FRP laminates", Cement Concrete Comp., 28(1), 102-114. https://doi.org/10.1016/j.cemconcomp.2005.07.005
  9. Desai, C.S. (1998), DSC-SST2D code for two-dimensional static, repetitive and dynamic analysis: User's Manuals I to III, Tucson, AZ, USA.
  10. Desai, C.S. (2000), DSC-SST3D code for three-dimensional coupled repetitive and dynamic analysis, Tucson, AZ, USA.
  11. Desai, C.S. (2001), Mechanics of materials and interfaces: the disturbed state concept, CRC Press, Boca Raton, Florida, U.S.A.
  12. Desai, C.S. (2002), "Mechanistic pavement analysis and design using unified material and computer models", Proc. 3rd Intl. Symposium on 3D Finite Elements for Pavement Analysis, Design and Research, Amsterdam, The Netherlands.
  13. Desai, C.S. (2007), "Unified DSC constitutive model for pavement materials with numerical implementation", Int. J. Geomech. ASCE, 7(2), 83-101. https://doi.org/10.1061/(ASCE)1532-3641(2007)7:2(83)
  14. Desai, C.S. and Salami, M.R. (1987), "A constitutive model for rocks", J. Geotech. Eng. ASCE, 113, 407- 423. https://doi.org/10.1061/(ASCE)0733-9410(1987)113:5(407)
  15. Desai, C.S., Somasundaram, S. and Frantziskonis, G. (1986), "A hierarchical approach for constitutive modeling of geologic materials", Int. J. Numer. Anal. Meth. Geomech., 10(3), 225-257. https://doi.org/10.1002/nag.1610100302
  16. Desai, C.S. and Toth, J. (1996), "Disturbed state constitutive modelling based on stress-strain and nondestructive behavior", Int. J. Solids Struct., 33(11), 1619-1650. https://doi.org/10.1016/0020-7683(95)00115-8
  17. El-Refaie, S.A., Ashour, A.F. and Garrity, S.W. (2003), "Sagging and hogging strengthening of continuous reinforced concrete beams using carbon fiber-reinforced polymer sheets", ACI Struct. J., 100(4), 446-453.
  18. Kachanov, L.M. (1986), Introduction to continuum damage mechanics, Martinus Nijhoff Publishers, Dordrecht, The Netherlands.
  19. Kwak, H.G. and Kim, S.P. (2002), "Nonlinear analysis of RC beams based on moment-curvature relation", Comput. Struct., 80(7-8), 615-628. https://doi.org/10.1016/S0045-7949(02)00030-5
  20. Mostafaei, H., Vecchio, F.J. and Kabeyasawa, T. (2008), "Nonlinear displacement-based response prediction of reinforced concrete columns", Eng. Struct., 30(9), 2436-2447. https://doi.org/10.1016/j.engstruct.2008.01.020
  21. Mostofinejad, D. and Farahbod, F. (2007), "Parametric study on moment redistribution in continuous RC beams using ductility demand and ductility capacity concepts", Iran. J. Sci. Technol. Trans. B Eng., 31(5), 459-471.
  22. Park, I.J. and Desai, C.S. (2000), "Cyclic behavior and liquefaction of sand using disturbed state concept", J. Geotech. Geoenviron. Eng. ASCE, 126(9), 834-846. https://doi.org/10.1061/(ASCE)1090-0241(2000)126:9(834)
  23. Park, R. and Paulay, T. (1975), Reinforced concrete structures, John Wiley & Sons, Inc. Singapore.
  24. Pradhan, S.K. and Desai, C.S. (2006), "DSC model for soil and interface including liquefaction and prediction of centrifuge test", J. Geotech. Geoenviron. Eng. ASCE, 132(2), 214-222. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:2(214)
  25. Salami, M.R. and Desai, C.S. (1990), "Constitutive modeling including multiaxial testing for plain concrete under low confining pressure", J. Mater. Am. Concrete Inst., 87(3), 228-236.
  26. Saritas, A. and Filippou, Filip C. (2009), "Numerical integration of a class of 3d plastic-damage concrete models and condensation of 3d stress-strain relations for use in beam finite elements", Eng. Struct., 31(10), 2327-2336. https://doi.org/10.1016/j.engstruct.2009.05.005
  27. Shao, C. and Desai, C.S. (2000), "Implementation of DSC model and application for analysis of filed pile tests under cyclic loading", Int. J. Numer. Anal. Meth. Geomech., 24(6), 601-624. https://doi.org/10.1002/(SICI)1096-9853(200005)24:6<601::AID-NAG85>3.0.CO;2-3
  28. Taylor, A.W., Kuo, C., Wellenius, K. and Chung, D. (1997), A summary of cyclic lateral load test on rectangular reinforced concrete columns, NISTIR 5984, National Institute of Standards and Technology, Gaithersburg, Maryland.
  29. Vecchio, F.J. and Shim, W. (2004), "Experimental and analytical reexamination of classic concrete beam tests", J. Struct. Eng.-ASCE, 130(3), 460-469. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:3(460)
  30. Weibull, W.A. (1951), "A statistical distribution function of wide applicability", Appl. Mech., 18, 293-297.
  31. Willam, K.J. and Warnke, E.P. (1974), "Constitutive model for triaxial behavior of concrete", Seminar on Concrete Structure Subjected to Triaxial Stress, International Association of Bridge and Structural Engineering Conference, Bergamo, Italy.
  32. Willam, K. and Tanabe, T.A. (2001), Finite element analysis of reinforced concrete structures, American Concrete Institute, Farmington Hills, MI.
  33. Wolanski, A.J. (2004), Flexural behavior of reinforced and prestressed concrete beams using finite element analysis, Master's Thesis, Marquette University, Milwaukee, Wisconsin.
  34. Yalcin, C. and Saatcioglu, M. (2000), "Inelastic analysis of reinforced concrete columns", Comput. Struct., 77(5), 539-555. https://doi.org/10.1016/S0045-7949(99)00228-X
  35. Zienkiewicz, O.C., Valliapan, S. and King, I.P. (1968), "Stress analysis of rock as a no tension material", Geotech., 18(1), 56-66. https://doi.org/10.1680/geot.1968.18.1.56

피인용 문헌

  1. Disturbed state concept as unified constitutive modeling approach vol.8, pp.3, 2016, https://doi.org/10.1016/j.jrmge.2016.01.003
  2. Constitutive modeling of materials and contacts using the disturbed state concept: Part 1 – Background and analysis vol.146, 2015, https://doi.org/10.1016/j.compstruc.2014.07.018
  3. Perforation optimization of hydraulic fracturing of oil and gas well vol.5, pp.5, 2013, https://doi.org/10.12989/gae.2013.5.5.463
  4. Analysis of pile foundations using natural element method with disturbed state concept 2017, https://doi.org/10.1016/j.compgeo.2017.11.005
  5. Hydraulic fracturing experiments of highly deviated well with oriented perforation technique vol.6, pp.2, 2014, https://doi.org/10.12989/gae.2014.6.2.153
  6. Constitutive modeling of materials and contacts using the disturbed state concept: Part 2 – Validations at specimen and boundary value problem levels vol.146, 2015, https://doi.org/10.1016/j.compstruc.2014.07.026
  7. Testing and Constitutive Modeling of Lime-Stabilized Collapsible Loess. II: Modeling and Validations vol.19, pp.4, 2019, https://doi.org/10.1061/(ASCE)GM.1943-5622.0001386