DOI QR코드

DOI QR Code

Active load control for wind turbine blades using trailing edge flap

  • 투고 : 2011.09.22
  • 심사 : 2012.04.02
  • 발행 : 2013.03.25

초록

The fatigue load of a turbine blade has become more important because the size of commercial wind turbines has increased dramatically in the past 30 years. The reduction of the fatigue load can result in an increase in operational efficiency. This paper numerically investigates the load reduction of large wind turbine blades using active aerodynamic load control devices, namely trailing edge flaps. The PD and LQG controllers are used to determine the trailing edge flap angle; the difference between the root bending moment and its mean value during turbulent wind conditions is used as the error signal of the controllers. By numerically analyzing the effect of the trailing edge flaps on the wind turbines, a reduction of 30-50% in the standard deviation of the root bending moment was achieved. This result implies a reduction in the fatigue damage on the wind turbines, which allows the turbine blade lengths to be increased without exceeding the designed fatigue damage limit.

키워드

과제정보

연구 과제 주관 기관 : Korea Institute of Energy Technology Evaluation and Planning (KETEP)

참고문헌

  1. Andersen, P.B., Gaunaa, M., Bak, C. and Buhl, T. (2007), "Wind tunnel test on wind turbine airfoil with adaptive trailing edge geometry", Proceedings of the 45th AIAA aerospace sciences meeting and exhibition, Reno, NV, USA.
  2. Barlas, T.K. and Kuik, van G.A.M. (2009), Aeroelastic modelling and comparison of advanced active flap control concepts for load reduction on the upwind 5MW wind turbine, DUWIND, Delft University of Technology.
  3. Basualdo, S. (2005), "Load alleviation on wind turbine blades using variable airfoil geometry", Wind Eng., 29(2), 169-182. https://doi.org/10.1260/0309524054797122
  4. Bergami, L. (2008), Aeroservoelastic Stability of a 2D airfoil section equipped with a trailing edge flap, Technical report, Riso-R-1663(EN).
  5. DeLaurier, J.D. (1993), "An aerodynamic model for flapping-wing flight", Aeronaut. J., 97, 125-130.
  6. Dorato, P. and Abdallah, C. (1995), Linear-quadratic control: an introduction, Prentice Hall, New Jersey, Chap. 2, 6.
  7. Gaunaa, M. (2006), Unsteady 2D potential-flow forces on a thin variable geometry airfoil undergoing arbitrary motion, Technical report, Riso-R-1478 (EN).
  8. Holm-Jorgensen, K., Stærdahl, J.W. and Nielsen, S.R.K. (2008), "On the nonlinear structural analysis of wind turbine blades using reduced degree-of-freedom models", Struct. Eng. Mech., 28(1), 107-127. https://doi.org/10.12989/sem.2008.28.1.107
  9. Jonkman, J., Butterfield, S., Musial, W. and Scott, G. (2009), Definition of a 5MW reference wind turbine for offshore system development, Technical report NREL/TP-500-38060.
  10. Kim, D.K., Lee, J.S. and Han, J.H. (2011), "Improved aerodynamic model for efficient analysis of flappingwing flight", AIAA J., 49(4), 868-872. https://doi.org/10.2514/1.J050556
  11. Ljung, L. (2001), "Prediction error estimation methods", Circ. Syst. Signal Pr., 21(1), 11-21.
  12. Ogata, K. (1990), Modern control engineering, 2nd Ed, Prentice-Hall International Editions.
  13. Soderstrom, T. and Stoica, P. (1989), System identification, Prentice Hall, UK, Chap. 5, 7.
  14. Theodorsen, T. (1935), General theory of aerodynamic instability and the mechanism of flutter, NACA Report 496.
  15. Troldborg, N. (2005), "Computational study of the RisoB1-18 airfoil with a hinged flap providing variable trailing edge geometry", Wind Eng., 29(2), 89-113. https://doi.org/10.1260/0309524054797159
  16. Wilson, D.G., Berg, D.E., Barone, M.F., Berg, J.C., Resor, B.R. and Lobitz, D.W. (2009), Active aerodynamic blade control design for load reduction on large wind turbines, European Wind Energy Conference & Exhibition 2009, Parc Chanot, Marseille, France.

피인용 문헌

  1. Active load control of wind turbine blade section with trailing edge flap: Wind tunnel testing vol.25, pp.18, 2014, https://doi.org/10.1177/1045389X14544143
  2. Statistical wind prediction and fatigue analysis for horizontal-axis wind turbine composite material blade under dynamic loads vol.9, pp.9, 2017, https://doi.org/10.1177/1687814017724088
  3. An integrator based wind speed estimator for wind turbine control vol.21, pp.4, 2015, https://doi.org/10.12989/was.2015.21.4.443
  4. Dynamic Stall Control on the Wind Turbine Airfoil via a Co-Flow Jet vol.9, pp.12, 2016, https://doi.org/10.3390/en9060429
  5. Vibration control of small horizontal axis wind turbine blade with shape memory alloy vol.21, pp.3, 2013, https://doi.org/10.12989/sss.2018.21.3.257
  6. Optimal Fault Tolerant Control of Large-Scale Wind Turbines in the Case of the Pitch Actuator Partial Faults vol.2020, pp.None, 2020, https://doi.org/10.1155/2020/6210407
  7. Aerodynamic load control on a dynamically pitching wind turbine airfoil using leading-edge protuberance method vol.36, pp.2, 2013, https://doi.org/10.1007/s10409-020-00939-2
  8. Flutter study of flapwise bend-twist coupled composite wind turbine blades vol.32, pp.3, 2021, https://doi.org/10.12989/was.2021.32.3.267
  9. Long-term fatigue reliability enhancement of horizontal axis wind turbine blade vol.33, pp.2, 2013, https://doi.org/10.12989/was.2021.33.2.169