Smart Structures and Systems

  • 제11권2호
  • /
  • Pages.185-197
  • /
  • 2013
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Simultaneous active strain and ultrasonic measurement using fiber acoustic wave piezoelectric transducers

  • Lee, J.R. (Department of Aerospace Engineering and LANL-CBNU Engineering Institute Korea, Chonbuk National University) ;
  • Park, C.Y. (Aeronautical Technology Directorate, Agency for Defense Development) ;
  • Kong, C.W. (Structures and Materials Department, Korea Aerospace Research Institute)
  • 투고 : 2011.01.10
  • 심사 : 2012.10.27
  • 발행 : 2013.02.25
⟨ 이전 논문 다음 논문 ⟩

초록

We developed a simultaneous strain measurement and damage detection technique using a pair of surface-mounted piezoelectric transducers and a fiber connecting them. This is a novel sensor configuration of the fiber acoustic wave (FAW) piezoelectric transducer. In this study, lead-zirconate-titanate (PZT) transducers are installed conventionally on a plate's surface, which is a technique used in many structural health monitoring studies. However, our PZTs are also connected with an optical fiber. A FAW and Lamb wave are simultaneously guided in the optical fiber and the structure, respectively. The dependency of the time-of-flight of the FAW on the applied strain is quantified for strain sensing. In our experimental results, the FAW exhibited excellent linear behavior and no hysteresis with respect to the change in strain. On the other hand, the well-known damage detection function of the surface-mounted PZT transducers was still available by monitoring the waveform change in the conventional Lamb wave ultrasonic path.

키워드

과제정보

연구 과제 주관 기관 : National Research Foundation of Korea, Agency for Defense Development

참고문헌

  1. Agag, T., Koga, T. and Takeichi, T. (2001), "Studies on thermal and mechanical properties of polyimide - clay nanocomposites", Polymer, 42(8), 3399-3408. https://doi.org/10.1016/S0032-3861(00)00824-7
  2. Alahbabi, M.N., Cho, Y.T. and Newson, T.P. (2004), "Simultaneous distributed measurements of temperature and strain using spontaneous Raman and Brillouin scattering", Proceedings of the EWOFS 2004,Santander, Spain, June.
  3. Alleyne, D.N. and Cawley, P. (1997), "Long range propagation of Lamb waves in chemical plant pipework", Mater. Eval., 55(4), 504-508.
  4. Bang, H.J., Kim, D.H., Kang, H.K., Hong, C.S. and Kim, C.G. (2003), "Optical fiber sensor systems for simultaneous monitoring of strain and damage in smart composites", Proceedings of the SPIE 5050, San Diego, USA, March.
  5. Betz, D.C., Thursby, G., Culshaw, B. and Staszewski, W.J. (2003), "Acousto ultrasonic sensing using fiber Bragg gratings", Smart Mater. Struct., 12(1), 122-128. https://doi.org/10.1088/0964-1726/12/1/314
  6. Caucheteur, C., Lhomme, F., Maakaroun, F., Chah, K., Blondel, M. and Megret, P. (2004), "Simultaneous strain and temperature sensor using superimposed tilted Bragg gratings", Proceedings of the Symp. IEEE/LEOS Benelux Chapter, Ghent, Belgium, Dec.
  7. Chia, C.C., Lee, J.R. and Shin, H.J. (2009), "Hot target inspection using a welded fibre acoustic wave piezoelectric sensor and laser ultrasonic mirror scanner", Meas. Sci. Technol., 20(12), 127003. https://doi.org/10.1088/0957-0233/20/12/127003
  8. Flynn, E.B., Swartz, A., Backman, D.E., Park, G. and Farrar, C.R. (2009), "Active-sensing Lamb wave propagation for damage identification in honeycomb aluminum panels", J. Korean Society for Nondestructive Testing, 29, 269-282.
  9. Frazao, O., Ramos, C.A., Pinto, N.M.P., Baptista, J.M. and Marques, A.T. (2005), "Simultaneous measurement of pressure and temperature using single mode optical fibres embedded in a hybrid composite laminated", Comp. Sci. Technol., 65(11-12), 1756-1760. https://doi.org/10.1016/j.compscitech.2005.03.002
  10. Giurgiutiu, V., Zagrai, A. and Bao, J.J. (2002), "Piezoelectric wafer embedded active sensors for aging aircraft structural health monitoring", Struct. Health Monit., 1(1), 41-61. https://doi.org/10.1177/147592170200100104
  11. Ihn, J.B. and Chang, F.K. (2004), "Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: II Validation using riveted joints and repair patches", Smart Mater. Struct., 13(3), 621-630. https://doi.org/10.1088/0964-1726/13/3/021
  12. Kessler, S.S., Spearing, S.M. and Soutis, C. (2002), "Damage detection in composite materials using Lamb wave methods", Smart Mater. Struct., 11(2), 269-278. https://doi.org/10.1088/0964-1726/11/2/310
  13. Kim, M.H., Pakr, G. and Inman, D.J. (2001), "Simultaneous control and monitoring of adaptive structures using smart sensors', Proceedings of the IMAC-XIX: A Conference & Exposition on Structural Dynamics, Kissimmee, Florida, USA, Feb.
  14. Koh, J.I, Bang, H.J., Kim, C.G. and Hong, C.S. (2005), "Simultaneous measurement of strain and damage signal of composite structures using a fiber Bragg grating sensor", Smart Mater. Struct., 14(4), 658-663. https://doi.org/10.1088/0964-1726/14/4/024
  15. Lee, J.R. and Tsuda, H. (2006), "Investigation of a fiber wave piezoelectric transducer", Meas. Sci. Technol., 17(9), 2414-2420. https://doi.org/10.1088/0957-0233/17/9/007
  16. Mahar, S., Geng, J., Schultz, J., Minervini, J., Jiang, S., Titus, P., Takayasu, M., Gung, C.Y., Tian, W. and Arturo, C.P. (2008), "Real-time simultaneous temperature and strain measurements at cryogenic temperatures in an optical fiber", Proceedings of the SPIE, San Diego, USA, Aug.
  17. Mondal, S.K., Mal, S., Tiwari, U., Sarkar, S., Mishra, V., Poddar, G.C., Mehla, N.S., Jain, S.C. and Kapur, P. (2009), "Simultaneous measurement of strain and temperature using partially etched single fiber Bragg grating sensor ", Proceedings of the ICOP-200, Chandigarh, India, Oct- Nov.
  18. Neill, I.T, Oppenheim, I.J. and Greve, D.W. (2007), "A wire-guided transducer for acoustic emission sensing", Proceedings of the SPIE 6529, San Diego, March.
  19. Park, S.O., Jang, B.W., Lee, Y.G., Kim, C.G. and Park, C.Y. (2010), "Simultaneous measurement of strain and temperature using a reverse index fiber Bragg grating sensor", Meas. Sci. Technol., 21(3), 035703.1-8.
  20. Rajan, G., Mileńko, K., Lesiak, P., Semenova, Y., Boczkowska, A., Ramakrishnan, M., Jędrzejewski, K., Domański, A., Woliński, T. and Farrell, G. (2010), "A hybrid fiber optic sensing system for simultaneous strain and temperature measurement and its applications", Photonics Letters of Poland, 2(1), 46-48.
  21. Rose, J.L. (2004), Ultrasonic Waves in Solid Media, Cambridge University Press, Cambridge.
  22. Taotao Z. and Shi Zhifei S. (2011) "Exact solutions of the piezoelectric transducer under multi loads", Smart Struct. Syst.,8(4), 413-431. https://doi.org/10.12989/sss.2011.8.4.413
  23. Valdivielso, C.F., Matias, I.R. and Arregui, F.J. (2002), "Simultaneous measurement of strain and temperature using a fiber Bragg grating and a thermochromic material", Sens. Act. A:Physical, 101(1-2), 107-116. https://doi.org/10.1016/S0924-4247(02)00188-7
  24. Vipperman, J.S. (2001),"Simultaneous qualitative health monitoring and adaptive piezoelectric sensoriactuation", AIAA J., 39(9), 1822-1825. https://doi.org/10.2514/2.1520
  25. H.M. Wang, Y.K. Wei and Z.X. Xu (2011), "Radial vibration behaviors of cylindrical composite piezoelectric transducers integrated with functionally graded elastic layer", Struct. Eng. Mech., 38(6), 753-766. https://doi.org/10.12989/sem.2011.38.6.753
  26. Zhao, X.L. and Rose, J.L. (2003), "Boundary element modeling for defect characterization potential in a wave guide", Int. J. Solids Struct., 40(11), 2645-2658. https://doi.org/10.1016/S0020-7683(03)00097-0
  27. Zheng, S. and Zhang, X. (2005), "Simultaneous measurement of pressure and temperature using a single fiber Bragg grating", Proceedings of the Electromagnetics Research Symp., Hangzhou, China, Aug.

피인용 문헌

  1. The study on piezoelectric transducers: theoretical analysis and experimental verification vol.15, pp.4, 2015, https://doi.org/10.12989/sss.2015.15.4.1063
  2. 2D Analytical Model for the Directivity Prediction of Ultrasonic Contact Type Transducers in the Generation of Guided Waves vol.18, pp.4, 2018, https://doi.org/10.3390/s18040987
  3. Guided wave field calculation in anisotropic layered structures using normal mode expansion method vol.26, pp.2, 2013, https://doi.org/10.12989/sss.2020.26.2.157