Structural Engineering and Mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Strength model for square concrete columns confined by external CFRP sheets

  • Received : 2012.01.03
  • Accepted : 2013.03.10
  • Published : 2013.04.10
⟨ Previous Next ⟩

Abstract

An experimental study has been carried out on square plain concrete (PC) and reinforced concrete (RC) columns strengthened with carbon fiber-reinforced polymer (CFRP) sheets. A total of 78 specimens were loaded to failure in axial compression and investigated in both axial and transverse directions. Slenderness of the columns, number of wrap layers and concrete strength were the test parameters. Compressive stress, axial and hoop strains were recorded to evaluate the stress-strain relationship, ultimate strength and ductility of the specimens. Results clearly demonstrate that composite wrapping can enhance the structural performance of square columns in terms of both maximum strength and ductility. On the basis of the effective lateral confining pressure of composite jacket and the effective FRP strain coefficient, new peak stress equations were proposed to predict the axial strength and corresponding strain of FRP-confined square concrete columns. This model incorporates the effect of the effective circumferential FRP failure strain and the effect of the effective lateral confining pressure. The results show that the predictions of the model agree well with the test data.

Keywords

References

  1. Al-Salloum, Y.A. (2007), "Influence of edge sharpness on the strength of square concrete columns confined with frp composite laminates", Composite Part B, 38, 640-650. https://doi.org/10.1016/j.compositesb.2006.06.019
  2. Almusallam, T.H. (2007), "Behavior of normal and high-strength concrete cylinders confined with Eglass/ epoxy composite laminates", Composites part B, 38, 629-639.
  3. Benzaid, R., Chikh, N.E. and Mesbah, H. (2008), "Behaviour of square concrete columns confined with GFRP composite wrap", J. Civil Eng. Manag., 14(2), 115-120. https://doi.org/10.3846/1392-3730.2008.14.6
  4. Benzaid, R., Chikh, N.E. and Mesbah, H. (2009), "Study of the compressive behavior of short concrete columns confined by fiber reinforced composite", Arab. J. Sci. Eng., 34(1B), 15-26.
  5. Benzaid, R., Mesbah, H. and Chikh, N.E. (2010), "FRP-confined concrete cylinders: axial compression experiments and strength model", J. Reinf. Plast. Compos., 29(16), 2469-2488. https://doi.org/10.1177/0731684409355199
  6. Benzaid, R. (2010), "Contribution a l'etude des materiaux composites dans le renforcement et la reparation des elements structuraux lineaires en beton", These de Doctorat, INSA de Rennes, France. (In French)
  7. Cusson, D. and Paultre, P. (1995), "Stress-strain model for confined high-strength concrete", ASCE J. Struct. Eng., 121(3), 468-477. https://doi.org/10.1061/(ASCE)0733-9445(1995)121:3(468)
  8. Cole, C. and Belarbi, A. (2001), "Confinement characteristics of rectangular FRP jacketed RC columns", Proceedings of the Fifth International Symposium on Fiber Reinforced Polymer for Reinforce Concrete Structures (FRPRCS-5), Cambridge, 823-832.
  9. Campione, G. and Miraglia, N. (2003), "Strength and strain capacities of concrete compression members reinforced with FRP", Cem Concr Compos., 25, 31-41. https://doi.org/10.1016/S0958-9465(01)00048-8
  10. Demer, M. and Neale, K.W. (1994), "Strengthening of concrete columns with unidirectional composite sheets", Eds. Mufti, A.A., Bakht, B. and Jaeger, L.G., Development in Short and Medium Span Bridge Engineering'94, Proceedings of the fourth International Conference on Short and Medium Span Bridges, Canadian society for civil engineering, Montreal, Canada.
  11. Lam, L. and Teng, J.G. (2003), "Design-oriented stress-strain model for FRP-confined concrete in rectangular columns", J. Reinf. Plast. Compos., 22(13), 1149-1186. https://doi.org/10.1177/0731684403035429
  12. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", ASCE, J. Struct. Eng., 114 (8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
  13. Mirmiran, A., Shahawy, M., Samaan, M. and El Echary, H. (1998), "Effect of column parameters on FRPconfined concrete", ASCE J. Compos. Constr., 2(4), 175-185. https://doi.org/10.1061/(ASCE)1090-0268(1998)2:4(175)
  14. Matthys, S., Toutanji, H., Audenaert, K. and Taer we, L. (2005), "Axial load behavior of large-scale columns confined with fiber-reinforced polymer composites", ACI Struct. J., 102(2), 258-267.
  15. NF EN ISO 527-1 (1993), Determination of Tensile Properties of Plastics Materials Part 1: General Principles, ISO International Standards.
  16. NF EN ISO 527-2 (1993), Determination of Tensile Properties of Plastics Materials Part 2: Test Conditions for Moulding and Extrusion Plastics, ISO International Standards.
  17. NF EN ISO 527-5 (1997), Determination of Tensile Properties of Plastics Materials Part 5: Test Conditions for Unidirectional Fibre-Reinforced Plastic Composites, ISO International Standards.
  18. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, John Wiley and Sons, N.Y., U.S.A.
  19. Richart, F.E., Brandtzaeg, A. and Brown, R.L. (1929), The Failure of Plain and Spirally Reinforced Concrete in Compression, Bulletin No.190, Engineering Experiment Station, University of Illinois, Urbana, USA.
  20. Rochette, P. (1996), "Confinement de colonnes courtes en beton de section carree ou rectangulaire avec des materiaux composites", Maitrise Es-Sciences Appliquees, Universite de Sherbrooke, Canada. (In French)
  21. Rochette, P. and Labossiere, P. (2000), "Axial testing of rectangular column models confined with composites", ASCE J. Compos. Construct., 4(3), 129-136. https://doi.org/10.1061/(ASCE)1090-0268(2000)4:3(129)
  22. Saadatmanesh, H., Ehsani, M.R. and Li, M.W. (1994), "Strength and ductility of concrete columns externally reinforced with composites straps", ACI Struct. J., 91(4), 434-447.
  23. Samaan, M., Mirmiran, A. and Shahawy M. (1998), "Model of concrete confined by fiber composites", ASCE, J. Struct. Eng., 124(9), 1025-1031. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:9(1025)
  24. Shehata, I.A.E.M., Carneiro, L.A.V. and Shehata, L.C.D. (2002), "Strength of short concrete columns confined with CFRP sheets", RILEM Mater. Struct., 35, 50-58. https://doi.org/10.1007/BF02482090
  25. Wu, G., Lu, Z.T. and Wu, Z.S. (2006), "Strength and ductility of concrete cylinders confined with FRP composites", Construct. Build. Mater., 20, 134-148. https://doi.org/10.1016/j.conbuildmat.2005.01.022
  26. Yang, X., Nanni, A. and Chen, G. (2001), "Effect of corner radius on the performance of externally bonded FRP reinforcement", Proceedings of the Fifth International Symposium on Fiber Reinforced Polymer for Reinforce Concrete Structures (FRPRCS-5), Cambridge, 197-204.
  27. Youssef, M.N., Feng, M.Q. and Mosallam, A.S. (2007), "Stress-strain model for concrete confined by FRP composites", Composites: Part B, 38, 614-628. https://doi.org/10.1016/j.compositesb.2006.07.020

Cited by

  1. Damage-based stress-strain model of RC cylinders wrapped with CFRP composites vol.5, pp.5, 2013, https://doi.org/10.12989/acc.2017.5.5.539
  2. Experimental and numerical investigation of strengthened deficient steel SHS columns under axial compressive loads vol.67, pp.2, 2013, https://doi.org/10.12989/sem.2018.67.2.207
  3. A new numerical model for polymer-confined rectangular concrete columns vol.172, pp.7, 2013, https://doi.org/10.1680/jstbu.17.00103
  4. Crack Resistance RC Columns Strengthened by CFRP System vol.878, pp.None, 2013, https://doi.org/10.4028/www.scientific.net/kem.878.127
  5. Lateral Deformation Capacity and Plastic Hinge Length of RC Columns Confined with Textile Reinforced Mortar Jackets vol.2, pp.3, 2013, https://doi.org/10.3390/civileng2030037