DOI QR코드

DOI QR Code

Deflection prediction of inflatable flat panels under arbitrary conditions

  • Mohebpour, S.R. (Department of Mechanical Engineering, Persian Gulf University)
  • 투고 : 2012.08.27
  • 심사 : 2013.02.23
  • 발행 : 2013.03.25

초록

Inflatable panels made of modern and new textile materials can be inflated at high pressure to have a high mechanical strength. This paper is based on the finite element method as a general solution to determine the characteristics of deformed inflatable panels at high pressure in various end and loading conditions. Proposed method is based on the construction of weak form of formulation and application of Reduced Integration Element method (RIE) to solve the numerical problem of shear locking. The numerical results are validated as an outcome of comparison with other published results.

키워드

참고문헌

  1. Apedo, K.L., Ronel, S., Jacquelin, E., Bennani, A. and Massenzio, M. (2010), "Nonlinear finite element analysis of inflatable beams made from orthotropic woven fabric", International Journal of Solids and Structures, 47(16), 2017-2033. https://doi.org/10.1016/j.ijsolstr.2010.03.030
  2. Argyris, J.H., Dunne, P.C., Naasse, M. and Orkisz, J. (1977), "Higher order simplex elements for large strain-natural approach", Computer Methods in Applied Mechanical Engineering, 16, 369-403.
  3. Bonet, J. (2000), "Finite element analysis of air supported membrane structures", Computer Methods in Applied Mechanical Engineering, 190, 579-595. https://doi.org/10.1016/S0045-7825(99)00428-4
  4. Bouzidi, R., Ravaut, Y. and Wielgosz, C. (2003), "Finite elements for 2D problems of pressurized membranes", Computers and Structures, 81, 2479-2490. https://doi.org/10.1016/S0045-7949(03)00308-0
  5. Brayley, K.E., Davids, W.G. and Clapp, J.D. (2012), "Bending response of externally reinforced, inflated, braided fabric arches and beams", Construction and Building Materials, 30, 50-58. https://doi.org/10.1016/j.conbuildmat.2011.12.042
  6. Coda, H.B. (2009), "Two dimensional analysis of inflatable structures by the positional FEM", Latin American Journal of Solids and Structures, 6(3), 187-212.
  7. Comer, R.L. and Levy, S. (1963), "Deflections of an inflated circular cylindrical cantilever beam", AIAA Journal, 1(7), 1652-1655. https://doi.org/10.2514/3.1873
  8. Davids, W.G. and Zhang, H. (2008), "Beam finite element for nonlinear analysis of pressurized fabric beam-columns", Engineering Structures, 30(7), 1969-1980. https://doi.org/10.1016/j.engstruct.2007.12.020
  9. De Souza, N., Peric, D. and Owen, D. (1995), "Finite elasticity in spatial description: linearization aspects with 3-D membrane applications", International Journal for Numerical Methods in Engineering, 38, 3365-81. https://doi.org/10.1002/nme.1620382002
  10. Gil, A.J. and Bonet J. (2006), "Finite Element Analysis of pre-stressed structural membranes", Finite Elements in Analysis and Design, 42(8-9), 683-697. https://doi.org/10.1016/j.finel.2005.10.009
  11. Gruttmann, F. and Taylor, R.L. (1992), "Theory and finite element formulation of rubberlike membrane shells using principle stretches", International Journal for Numerical Methods in Engineering, 35, 1111- 1126. https://doi.org/10.1002/nme.1620350511
  12. Kawabata, M. and Ishii, K. (1994), "Study on structural characteristics of air-inflated beam structures", Proceedings of IASSASCE International Symposium on Spatial, Lattice and Tension Structures, Atlanta, 742-751.
  13. Lampani, L. and Gaudenzi, P. (2010), "Numerical simulation of the behavior of inflatable structures for space", Acta Astronautica, 67(3-4), 362-368. https://doi.org/10.1016/j.actaastro.2010.02.006
  14. Lee, D.W., Ma, Z.D. and Kikuchi, N. (2011), "FOA (first-order-analysis) model of an expandable lattice structure for vehicle crash energy absorption of an inflatable morphing body", Structural Engineering and Mechanics, 37(6), 617-632. https://doi.org/10.12989/sem.2011.37.6.617
  15. Le van, A. and Wielgosz, C. (2005), "Bending and buckling of inflatable beams: some new theoretical results", Thin-Walled Structures, 43(8), 1166-1187. https://doi.org/10.1016/j.tws.2005.03.005
  16. Le van, A. and Wielgosz, C. (2007), "Finite element formulation for inflatable beams", Thin-Walled Structures, 45, 221-236. https://doi.org/10.1016/j.tws.2007.01.015
  17. Main, A., Peterson, S.W. and Strauss, A.M. (1994), "Load-deflection behavior of space-based inflatable fabric beams", Journal of Aerospace Engineering, 2(7), 225-238.
  18. Oden, J.T. and Sato, T. (1967), "Finite strains and displacements of elastic membranes by the finite element method", International Journal of Solids and Structures, 3, 471-488. https://doi.org/10.1016/0020-7683(67)90002-9
  19. Reddy, J.N. (1993), An introduction to the finite element method, McGraw Hill.
  20. Thomas, J.C. and Wielgosz, C. (2004), "Deflections of highly inflated fabric tubes", Thin-Walled Structures, 42(7), 1049-1066. https://doi.org/10.1016/j.tws.2004.03.007
  21. Wielgosz, C. and Thomas, J.C. (2002), "Deflections of inflatable fabric panels at high pressure", Thin- Walled Structures, 40, 523-536. https://doi.org/10.1016/S0263-8231(02)00010-1
  22. Wielgosz, C. and Thomas, J.C. (2003), "An inflatable fabric beam finite element", Communications in Numerical Methods in Engineering, 19(4), 307-312. https://doi.org/10.1002/cnm.592
  23. Wielgosz, C. and Thomas, J.C. (2004), "Deflections of highly inflated fabric tubes", Thin-Walled Structures, 42, 1049-1066.