DOI QR코드

DOI QR Code

Pressure loading, end- shortening and through- thickness shearing effects on geometrically nonlinear response of composite laminated plates using higher order finite strip method

  • Sherafat, Mohammad H. (Department of Mechanical Engineering, McGill University) ;
  • Ghannadpour, Seyyed Amir M. (Aerospace Engineering Department, Faculty of New Technologies and Engineering, ShahidBeheshti University) ;
  • Ovesy, Hamid R. (Aerospace Engineering Department and Centre of Excellence in Computational Aerospace Engineering, Amirkabir University of Technology)
  • Received : 2012.06.09
  • Accepted : 2013.02.19
  • Published : 2013.03.10

Abstract

A semi-analytical finite strip method is developed for analyzing the post-buckling behavior of rectangular composite laminated plates of arbitrary lay-up subjected to progressive end-shortening in their plane and to normal pressure loading. In this method, all the displacements are postulated by the appropriate harmonic shape functions in the longitudinal direction and polynomial interpolation functions in the transverse direction. Thin or thick plates are assumed and correspondingly the Classical Plate Theory (CPT) or Higher Order Plate Theory (HOPT) is applied. The in-plane transverse deflection is allowed at the loaded ends of the plate, whilst the same deflection at the unloaded edges is either allowed to occur or completely restrained. Geometric non-linearity is introduced in the strain-displacement equations in the manner of the von-Karman assumptions. The formulations of the finite strip methods are based on the concept of the principle of the minimum potential energy. The Newton-Raphson method is used to solve the non-linear equilibrium equations. A number of applications involving isotropic plates, symmetric and unsymmetric cross-ply laminates are described to investigate the through-thickness shearing effects as well as the effect of pressure loading, end-shortening and boundary conditions. The study of the results has revealed that the response of the composite laminated plates is particularly influenced by the application of the Higher Order Plate Theory (HOPT) and normal pressure loading. In the relatively thick plates, the HOPT results have more accuracy than CPT.

Keywords

References

  1. Azizian, Z.G. and Dawe, D.J. (1985), "Geometrically non-linear analysis of rectangular Mindlin plates using the finite strip method", Comput. Struct., 21, 423-436. https://doi.org/10.1016/0045-7949(85)90119-1
  2. Akhras, G. and Li, W. (2007), "Spline finite strip analysis of composite plates based on higher-order zigzag composite plate theory", Composite Struct., 78, 112-118. https://doi.org/10.1016/j.compstruct.2005.08.016
  3. Akhras, G. and Li, W. (2011), "Stability and free vibration analysis of thick piezoelectric composite plates using spline finite strip method", Int. J. of Mech. Sci., 53(8), 575-584. https://doi.org/10.1016/j.ijmecsci.2011.05.004
  4. Bradford, M.A. and Hancock, G.J. (1984), "Elastic interaction of local and lateral buckling in beams", Thinwalled Struct., 2, l-25.
  5. Cheung, Y.K. (1976), Finite Strip Method in Structural Analysis, Pergamon Press, Oxford.
  6. Dawe, D.J. (2002), "Use of the finite strip method in predicting the behavior of composite laminated structures", Composite Struct. 57, 11-36. https://doi.org/10.1016/S0263-8223(02)00059-4
  7. Dawe, D.J. and Azizian, Z.G. (1986), "The performance of Mindlin plate finite strips in geometrically nonlinear analysis", Comput.Struct., 23, 1-14. https://doi.org/10.1016/0045-7949(86)90101-X
  8. Dawe, D.J. and Craig, T.J. (1988), "Buckling and vibration of shear deformable prismatic plate structures by a complex finite strip method", Int. J. Mech. Sci., 30, 77-79. https://doi.org/10.1016/0020-7403(88)90063-X
  9. Dawe, D.J., Lam, S.S.E. and Azizian, Z.G. (1992), "Nonlinear finite strip analysis of rectangular laminates under end shortening, using classical plate theory", Int. J. Numer. Meth. Eng., 35, 1087-1110. https://doi.org/10.1002/nme.1620350510
  10. Dawe, D.J. and Peshkam, V. (1989), "Buckling and vibration of finite-length composite prismatic plate structures with diaphragm ends, Part I: Finite strip formulation", Comp. Meth. Appl. Mech. Eng.,77, l-30.
  11. Dawe, D.J. and Peshkam, V. (1990), "Buckling and vibration of long plate structures by complex finite strip methods", Int. J. Mech Sci.,32, 743-766. https://doi.org/10.1016/0020-7403(90)90026-F
  12. Dawe, D.J. and Peshkam, V. (1990), "A buckling analysis capability for use in the design of composite prismatic plate structures", Composite Struct., 16, 33-63. https://doi.org/10.1016/0263-8223(90)90066-N
  13. Ghannadpour, S.A.M. and Ovesy, H.R. (2008), "An exact finite strip for the calculation of relative postbuckling stiffness of I-section struts", Int. J. of Mech. Sci., 50(9), 1354-1364. https://doi.org/10.1016/j.ijmecsci.2008.07.010
  14. Graves-Smith, T.R. and Sridharan, S. (1978), "A finite strip method for the post-locally-buckled analysis of plate structures", Int. J. Mech. Sci., 20, 833-842. https://doi.org/10.1016/0020-7403(78)90009-7
  15. Hancock, G.J. (1981), "Nonlinear analysis of thin-walled sections in compression", J. Struct. Eng. Div., ASCE, 107, 455-471.
  16. Kazanci, Z. and Turkmen, H.S. (2012), "The effect of in-plane deformations on the nonlinear dynamic response of laminated plates", Struct Eng. Mech., 42(4), 589-608. https://doi.org/10.12989/sem.2012.42.4.589
  17. Lam, S.S.E., Dawe, D.J. and Azizian, Z.G. (1993), "Nonlinear analysis of rectangular laminates under end shortening, using shear deformation plate theory", Int. J. Numer. Meth. Eng., 36, 1045-1064. https://doi.org/10.1002/nme.1620360611
  18. Li, Z. and Lin, Z. (2010), "Non-linear buckling and post-buckling of shear deformable anisotropic laminated cylindrical shell subjected to varying external pressure loads", Composite Struct., 92, 553-567. https://doi.org/10.1016/j.compstruct.2009.08.048
  19. Ovesy, H.R. and Ghannadpour, S.A.M. (2005), "Non-linear analysis of composite laminated plates under end shortening using finite strip method", Proceedings of the 4th Australasian congress on applied mechanics, Melbourne, Australia.
  20. Ovesy, H.R. and Ghannadpour, S.A.M. (2007), "Large deflection finite strip analysis of functionally graded plates under pressure loads", Int. J. Struct. Stability Dynamic, 7(2), 193-211. https://doi.org/10.1142/S0219455407002241
  21. Ovesy, H.R. and Ghannadpour, S.A.M. (2009), "An exact finite strip for the calculation of relative postbuckling stiffness of isotropic plates", Struct. Eng. Mech., 31(2), 181-210. https://doi.org/10.12989/sem.2009.31.2.181
  22. Ovesy, H.R., Ghannadpour, S.A.M. and Morada, G. (2005), "Post-buckling analysis of composite laminated plates, using finite strip method", Proceedings of the 5th international conference on composite science and technology, Sharjah, UAE.
  23. Ovesy, H.R., Ghannadpour, S.A.M. and Morada, G. (2005), "Geometric non-linear analysis of composite laminated plates with initial imperfection under end shortening, using two versions of finite strip method", Composite Struct., 71, 307-314. https://doi.org/10.1016/j.compstruct.2005.09.030
  24. Ovesy, H.R., Ghannadpour, S.A.M. and Morada, G. (2006), "Post-buckling behavior of composite laminated plates under end shortening and pressure loading, using two versions of finite strip method", Composite Struct., 75, 106-113. https://doi.org/10.1016/j.compstruct.2006.04.006
  25. Ovesy, H.R., Ghannadpour, S.A.M. and Sherafat, M.H. (2010), "Buckling analysis of laminated composite plates using higher order Semi - analytical finite strip method", Applied Composite Materials, 17, 69-80. https://doi.org/10.1007/s10443-009-9098-2
  26. Peshkam, V. and Dawe, D.J. (1989), "Buckling and vibration of finite-length composite prismatic plate structures with diaphragm ends, Part II: computer programs and buckling applications", Comp. Meth. Appl. Mech. Eng., 77, 227-252. https://doi.org/10.1016/0045-7825(89)90077-7
  27. Reddy, J.N. (2004), Mechanics of laminated composite plates and shells, Theory and Analysis, Texas.
  28. Rezaiee-Pajand, M., Shahabian, F. and Tavakoli, F.H. (2012), "A new higher-order triangular plate bending element for the analysis of laminated composite and sandwich plates", Struct. Eng. Mech., 43(2), 253-271. https://doi.org/10.12989/sem.2012.43.2.253
  29. Shen, H. (2008), "Boundary layer theory for the buckling and post-buckling of an anisotropic laminated cylindrical shell. Part I: Prediction under axial compression", Composite Struct., 82, 346-361. https://doi.org/10.1016/j.compstruct.2007.01.024
  30. Shen, H. (2008), "Boundary layer theory for the buckling and post-buckling of an anisotropic laminated cylindrical shell, Part II: Prediction under external pressure", Composite Struct., 82, 362-370. https://doi.org/10.1016/j.compstruct.2007.01.018
  31. Sridharan, S. and Graves-Smith, T.R. (1981), "Post-buckling analyses with finite strips", J. Eng. Mech. Div., ASCE, 107, 869-887.
  32. Wang, S. and Dawe, D.J. (1999), "Spline FSM post-buckling analysis of shear deformable rectangular laminates", Thin-walled Struct., 34, 163-178. https://doi.org/10.1016/S0263-8231(99)00008-7

Cited by

  1. Post-buckling finite strip analysis of thick functionally graded plates vol.49, pp.5, 2014, https://doi.org/10.12989/sem.2014.49.5.569
  2. BUCKLING ANALYSIS OF FUNCTIONALLY GRADED PLATES UNDER MECHANICAL LOADING USING HIGHER ORDER FUNCTIONALLY GRADED STRIP vol.13, pp.06, 2013, https://doi.org/10.1142/S0219455413500338
  3. Nonlinear spectral collocation analysis of imperfect functionally graded plates under end-shortening vol.66, pp.5, 2013, https://doi.org/10.12989/sem.2018.66.5.557
  4. An efficient shear deformation theory with stretching effect for bending stress analysis of laminated composite plates vol.74, pp.3, 2013, https://doi.org/10.12989/sem.2020.74.3.365
  5. Nonlinear dynamic buckling analysis of imperfect viscoelastic composite laminated plates vol.79, pp.5, 2013, https://doi.org/10.12989/sem.2021.79.5.653