DOI QR코드

DOI QR Code

Multiobjective optimum design of laminated composite annular sector plates

  • Topal, Umut (Karadeniz Technical University, Of Faculty of Technology)
  • Received : 2012.09.30
  • Accepted : 2012.12.01
  • Published : 2013.02.25

Abstract

This paper deals with multiobjective optimization of symmetrically laminated composite angle-ply annular sector plates subjected to axial uniform pressure load and thermal load. The design objective is the maximization of the weighted sum of the critical buckling load and fundamental frequency. The design variable is the fibre orientations in the layers. The performance index is formulated as the weighted sum of individual objectives in order to obtain the optimum solutions of the design problem. The first-order shear deformation theory is used for the mathematical formulation. Finally, the effects of different weighting factors, annularity, sector angle and boundary conditions on the optimal design are investigated and the results are compared.

Keywords

References

  1. Ding, H.J. and Xu, R.Q., (2010), "Free axisymmetric vibration of laminated transversely isotropıc annular plates", J. Sound Vib., 230, 1031-1044.
  2. Dumi, P.C., Dube, G.P. and Mallick, A., (2011), Axisymmetric postbuckling of moderately thick laminated annular plate using FSDT", Compos. Struct., 51(3), 311-318.
  3. Houmat, A., 2008, "Large amplitude free vibration of shear deformable laminated composite annular sector plates by a sector p-element", Int. J. Non-Linear Mech., 43(9), 834-843. https://doi.org/10.1016/j.ijnonlinmec.2008.05.007
  4. Malekzadeh, P., 2009, "Three-dimensional free vibration analysis of thick laminated annular sector plates using a hybrid method", Compos. Struct., 90(4), 428-437. https://doi.org/10.1016/j.compstruct.2009.04.015
  5. Malekzadeh, P., Haghighi, M.R.G. and Gholami, M., (2010), "Dynamic response of thick laminated annular sector plates subjected to moving load", Compos. Struct., 92(1), 155-163. https://doi.org/10.1016/j.compstruct.2009.07.020
  6. Pawlus, D., (2011), "Solution to the problem of axisymmetric and asymmetric dynamic instability of three-layered annular plates", Thin-Walled Struct., 49(5), 660-668. https://doi.org/10.1016/j.tws.2010.09.013
  7. Seifi, R., Khoda-yari, N.and Hosseini, H., (2012), "Study of critical buckling loads and modes of cross-ply laminated annular plates", Compos. Part B: Eng., 43(2), 422-430. https://doi.org/10.1016/j.compositesb.2011.08.051
  8. Sharma, A., Sharda, H.B. and Nath, Y. (2005), "Stability and vibration of thick laminated composite sector plates", J. Sound Vib., 287(1-2), 1-23. https://doi.org/10.1016/j.jsv.2004.10.030
  9. Singhatanadgid, P. and Ungbhakorn, V., (2005), "Scaling laws for buckling of polar orthotropic annular plates subjected to compressive and torsional loading", Thin-Walled Struct., 43(7), 1115-1129. https://doi.org/10.1016/j.tws.2004.11.004
  10. Xu, R.Q., (2008), "Three-dimensional exact solutions for the free vibration of laminated transversely isotropic circular, annular and sectorial plates with unusual boundary conditions", Arch. App. Mech., 78, 543-558. https://doi.org/10.1007/s00419-007-0177-2

Cited by

  1. Exploring how optimal composite design is influenced by model fidelity and multiple objectives vol.160, 2017, https://doi.org/10.1016/j.compstruct.2016.10.089