References
- V. Psyk, D. Risch, B. L. Kinsey, A. E. Tekkaya and M. Kleiner, "Electromagnetic Forming-A Review," Journal of Materials Processing Technology, Vol.211, Issue 5, pp.787-829, 2011. https://doi.org/10.1016/j.jmatprotec.2010.12.012
- H. M. Lee, B. S. Kang and J. Kim, "Development of Sheet Metal Forming Apparatus Using Electromagnetic Lorentz Force," Transactions of Materials Processing, Vol.19, No.1, pp.38-43, 2010. https://doi.org/10.5228/KSPP.2010.19.1.038
- J. Imbert and M. Worswick, "Reduction of a Pre-formed Radius in Aluminium Sheet Using Electromagnetic and Conventional Forming," Journal of Materials Processing Technology, Vol.212, Issue 9, pp.1963-1972, 2012. https://doi.org/10.1016/j.jmatprotec.2012.04.020
- D. Liu, C. Li and H. Yu, "Numerical Modeling and Deformation Analysis for Electromagnetically Assisted Deep Drawing of AA 5052 Sheet," Transactions of Nonferrous Metals Society of China, Vol.19, Issue 5, pp.1294-1302, 2009. https://doi.org/10.1016/S1003-6326(08)60441-0
- A. L. Gurson, "Continuum Theory of Ductile Rupture by Void Nucleation and Growth: Part I," Journal of Engineering Materials & Technology, Vol.99, pp.2-17, 1977. https://doi.org/10.1115/1.3443401
- V. Tvergaard, "Influence of Voids on Shear Band Instabilities under Plane Strain Conditions," International Journal of Fracture, Vol.17, No.4, pp.389-407, 1981. https://doi.org/10.1007/BF00036191
- M. J. Worswick and P. Pelletiera, "Numerical Simulation of Ductile Fracture during High Strain Rate Deformation," The European Physical Journal Applied Physics, Vol.4, Issue 3, pp.257-267, 1998. https://doi.org/10.1051/epjap:1998269
Cited by
- Development of Electrohydraulic Forming Apparatus and Its Experimental Study vol.25, pp.2, 2017, https://doi.org/10.7467/KSAE.2017.25.2.236
- Experimental validation of numerical modeling of electrohydraulic forming using an al 5052-H34 sheet vol.93, pp.5-8, 2017, https://doi.org/10.1007/s00170-017-0612-7