참고문헌
-
Henning Meier, Ute Loffelmann, Dario Mager, Patrick J. Smith, and Jan G. Korvink, "Inkjet printed, conductive, 25
$\mu$ m wide silver tracks on unstructured polyimide", Physica Status Solidi A, Vol. 206, pp. 1626, 2009. https://doi.org/10.1002/pssa.200925088 - Paul C. Duineveld, "The stability of ink-jet printed lines of liquid with zero receding contact angle on a homogeneous substrate", jof Fluid Mechanics, Vol. 477, pp. 175-200, 2003.
- Thijh H. J. van Osch, Jolke Perelaer, Antonius W. M. de Laat, Ulrich S. Schubert, "Inkjet Printing of Narrow Conductive Tracks on Untreated Polymeric Substrates", Advanced Materials, Vol. 20, pp. 343, 2008. https://doi.org/10.1002/adma.200701876
- Dongjo Kim, Sunho Jeong, Bong Kyun Park, and Jooho Moon, "Direct writing of silver conductive patterns: Improvement of film morphology and conductance by controlling solvent compositions", Applied Physics Letters, Vol. 89, pp. 264101, 2006. https://doi.org/10.1063/1.2424671
- Berend-Jan de Gans, and Ulrich S. Schubert, "Inkjet Printing of Well-Defined Polymer Dots and Arrays", Langmuir, Vol. 20, pp. 7789-7793, 2004. https://doi.org/10.1021/la049469o
- Robert D. Deegan, Olgica Bakajin, Todd F. Dupont, Greg Huber, Sidney R. Nagel, and Tomas A. Witten, "Contact line deposits in an evaporating drop", Physical Review E, Vol. 62, pp. 756-765, 2000. https://doi.org/10.1103/PhysRevE.62.756
- D.B. van Dam, and J.G.M. Kuerten, "Modeling the Drying of Ink-Jet-Printed Structures and Experimental Verification", Langmuir, Vol. 24, pp. 582-589, 2008. https://doi.org/10.1021/la701862a
- Dan Soltman and Vivek Subramanian, "Inkjet-Printed Line Morphologies and Temperature Control of the Coffee Ring Effect", Langmuir, Vol. 24, pp. 2224, 2008. https://doi.org/10.1021/la7026847
- Tang, K. C., Liao, E., Ong, W. L., Wong, J. D. S., Agarwal, A., Nagarajan, R., Yobas, L., "Evaluation of bonding between oxygen plasma treated polydimethyl siloxane and passivated silicon", Journal of Physics, vol. 34, PP. 155-161, 2006.
- Sang-Ho Lee and Young-June Cho, "Characterization of Silver Inkjet Overlap-Printing through Cohesion and Adhesion", Journal of Electrical Engineering and Technology, vol. 7, pp. 91-96, 2012. https://doi.org/10.5370/JEET.2012.7.1.91
- Markus, P. K. Turunen, Pekka Marjamaki, Matti Paajanen, Jouko Lahtinen, Jorma K. Kivilahti, "Pulloff test in the assessment of adhesion at printed wiring board metallization/epoxy interface", Journal of Microelectronics Reliability, Vol. 44, pp. 993-1007, 2004. https://doi.org/10.1016/j.microrel.2004.01.001
- Inyoung Kim, Young An Song, Hyun Chul Jung, Jea Woo Joung, Sung-Soo Ryu and Jongryoul Kim, "Effect of Microstructural Development on Mechanical and Electrical Properties of Inkjet-Printed Ag Films", Journal of Electronic Material Vol. 37, No. 12, 2008.
- Kwon-Yong Shin, Sang Ho Lee, Je Hoon Oh, "Solvent and substrate effects on inkjet-printed dots and lines of silver nanoparticle colloids", J. Micromech. Microeng. Vol. 21, pp. 11, 2011.
- Allen F. Horn, III, John W. Reynolds, James C Rautio, "Conductor Profile Effects on the Propagation Constant of Microstrip Transmission Lines", International Microwave Symposium Digest (MTT), 2010 IEEE MTT-S, pp. 868-871, 2010.
피인용 문헌
- Mechanical and thermal reliability of conductive circuits inkjet printed on flexible substrates vol.43, pp.1, 2017, https://doi.org/10.1108/CW-10-2016-0047
- RF performance of ink-jet printed microstrip lines on rigid and flexible substrates vol.168, 2017, https://doi.org/10.1016/j.mee.2016.11.011