DOI QR코드

DOI QR Code

Electrical resistivity and capillarity of self-compacting concrete with incorporation of fly ash and limestone filler

  • Silva, Pedro (Instituto Superior de Engenharia de Lisboa/Polytechnic Institute of Lisbon) ;
  • de Brito, Jorge (Instituto Superior Tecnico/ICIST, Technical University of Lisbon)
  • Received : 2012.11.28
  • Accepted : 2013.01.10
  • Published : 2013.03.25

Abstract

Electrical resistivity is a property associated with both the physical and chemical characteristics of concrete. It allows the evaluation of the greater or lesser difficulty with which aggressive substances penetrate the concrete's core before the dissolution of the passive film process and the consequent reinforcement's corrosion begin. This work addresses the capillary absorption of self-compacting concrete (SCC) with various types and contents of additions, correlating it with its electrical resistivity. To that effect, binary and ternary mixes of SCC were produced using fly ashes (FA) and limestone filler (LF). A total of 11 self-compactable mixes were produced: one with cement (C) only; three with C + FA in 30%, 60% and 70% substitution ratios; three with C + LF in 30%, 60% and 70% substitution ratios; four with C + FA + LF in combinations of 10-20%, 20-10%, 20-40% and 40-20% substitution ratios, respectively; and four reference mixes according to the LNEC E 464 specification, which refers to the NP EN 206-1 norm. The evaluation of the capillarity of the mixes produced was made through the determination of the water absorption by capillarity coefficient according to the LNEC E 393 specification. The electrical resistivity was evaluated using the European norm proposal presented by the EU-Project CHLORTEST (EU funded research Project under 5FP GROWTH programme) and based on the RILEM TC-154 EMC technical recommendation. The results indicate that SCC's capillarity is strongly conditioned by the type and quantity of the additions used. It was found that FA addition significantly improves some of the properties studied especially at older ages.

Keywords

References

  1. Assie, S. (2004), Durabilite des betons autoplacants, Toulouse, France, L'Institut National des Sciences Appliquees de Toulouse, These de doctorat.
  2. Assie, S., Escadeillas, G. and Waller, V. (2007), Estimates of self-compacting concrete 'potential' durability, Constr. Build. Mater., 21(10), 1909-1917. https://doi.org/10.1016/j.conbuildmat.2006.06.034
  3. Boel, V., Audenaert, K. and Schutter, G. (2002), Pore structure of self-compacting concrete, In First North American Conference on the Design and Use of Self-Consolidating Concrete, edited by Surendra Shah, Joseph Daczko, and James Lingscheit, Addison, Illinois, Hanley-Wood, 15-20.
  4. Boel, V., Audenaert, K., Schutter, G., Heirman, G., Vandewalle, L., Desmet, B. and Vantomme, J. (2007), "Transport properties of self-compacting concrete with limestone filler or fly ash", Mater. Struct., 40(5), 507-516. https://doi.org/10.1617/s11527-006-9159-z
  5. Cyr, M., Lawrence, P. and Ringot, E. (2006), "Efficiency of mineral admixtures in mortars: Quantification of the physical and chemical effects of fine admixtures in relation with compressive strength", Cement Concrete Res., 36(2), 264-277. https://doi.org/10.1016/j.cemconres.2005.07.001
  6. Dinakar, P., Babu, K.G. and Santhanam, M. (2008), "Durability properties of high volume fly ash self-compacting concretes", Cement Concrete Comp., 30(10), 880-886. https://doi.org/10.1016/j.cemconcomp.2008.06.011
  7. DURAR (2000), Thematic network XV.B durability of rebars, Manual for inspecting, evaluating and diagnosing corrosion in reinforced concrete structures, CYTED, Ibero-American Program Science and Technology for Development, Subprogram XV, Corrosion/Environmental Impact on Materials, ISBN: 980-296-541-3, 204.
  8. EPG (2005), "European project group, BIBM, CEMBUREAU, ERMCO, EFCA EFNARC, The European Guidelines for Self Compacting Concrete, Specification, Production and Use, 63.
  9. Esmaeilpoursaee, A. (2007), An analysis of the factors influencing electrochemical measurements of the condition of reinforcing steel in concrete structures, Ontario, Canada, University of Waterloo, 269.
  10. Gesoglu, M., Guneyisi, E. and Ozbay, E. (2009), "Properties of self-compacting concretes made with binary, ternary, and quaternary cementitious blends of fly ash, blast furnace slag, and silica fume", Constr. Build. Mater., 23(5), 1847-1854. https://doi.org/10.1016/j.conbuildmat.2008.09.015
  11. Hassan, A.A., Hossain, K.M. and Lachemi, M. (2009), "Corrosion resistance of self-consolidating concrete in full-scale reinforced beams", Cement Concrete Comp., 31(1), 29-38. https://doi.org/10.1016/j.cemconcomp.2008.10.005
  12. Isaia, G.C., Furquim, P. and Gastaldini, A.L. (2012), "A statistical approach of binary and ternary concrete mixtures with mineral additions", Constr. Build. Mater., 36, 597-603. https://doi.org/10.1016/j.conbuildmat.2012.06.026
  13. JSCE (1998), Recommendation for construction of self-compacting concrete, Proceedings of the International Workshop on Self-compacting Concrete, Kochi, Japan, 417-437.
  14. Khatib, J.M. (2008), "Performance of self-compacting concrete containing fly ash", Constr. Build. Mater., 22(9), 1963-1971. https://doi.org/10.1016/j.conbuildmat.2007.07.011
  15. Khokhar, M.I., Roziere, E., Turcry, P., Grondin, F. and Loukili, A. (2010), "Mix design of concrete with high content of mineral additions: Optimisation to improve early age strength", Cement Concrete Comp., 32(5), 377-385. https://doi.org/10.1016/j.cemconcomp.2010.01.006
  16. Liu, M. (2010), "Self-compacting concrete with different levels of pulverized fuel ash", Constr. Build. Mater., 24(7), 1245-1252. https://doi.org/10.1016/j.conbuildmat.2009.12.012
  17. LNEC E 393 (1993), Determination of the absorption of water through capillarity, National Laboratory for Civil Engineering, Lisbon, Portugal, 15. (In Portuguese)
  18. LNEC E 464 (2007), Concrete, Prescriptive methodology for a design working life of 50 and of 100 years under the environmental exposure, National Laboratory for Civil Engineering, Lisbon, Portugal, 15. (In Portuguese)
  19. LNEC E 466 (2005), Limestone fillers for hydraulic binders, National Laboratory for Civil Engineering, Lisbon, Portugal, National Laboratory for Civil Engineering, 2. (In Portuguese)
  20. Lubeck, A. (2008), Electrical properties of concrete with white Portland cement and blast-furnace slag, Santa Maria, Brazil, Federal University of Santa Maria, 142, Master's Dissertation. (In Portuguese)
  21. Lubeck, A., Gastaldini, A.L., Barin, D.S. and Siqueira, H.C. (2012), "Compressive strength and electrical properties of concrete with white Portland cement and blast-furnace slag", Cement Concrete Comp., 34(3), 392-399. https://doi.org/10.1016/j.cemconcomp.2011.11.017
  22. Luping, T. (2005), Guidelines for practical use of methods for testing the resistance of concrete to chloride ingress, EU-Project CHLORTEST (EU funded research Project under 5FP GROWTH programme), SP Swedish National, Testing and Research Institute, Boras, Sweden, 271.
  23. Mehta, P.K. and Monteiro, P.J.M. (2005), Concrete microstruture, properties and materials, McGraw-Hill, USA, ISBN: 0071462899, 684.
  24. Mnahoncakovaa, E., Pavlikovaa, M., Grzeszczykb, S., Kovac, P.R. and Cerny, R. (2008), "Hydric, thermal and mechanical properties of self-compacting concrete containing different fillers", Constr. Build. Mater., 22(7), 1594-1600. https://doi.org/10.1016/j.conbuildmat.2007.03.016
  25. Mounanga, P., Khokhar, M.I.A., Hachem, R. and Loukili A. (2011), "Improvement of the early-age reactivity of fly ash and blast furnace slag cementitious systems using limestone filler", Mater. Struct., 44(2), 437-453. https://doi.org/10.1617/s11527-010-9637-1
  26. Nagi, M. (2004), Resistivity of concrete: State of the Art, Conference CORROSION 2004, New Orleans, La, NACE International, 37.
  27. Nepomuceno, M. (2005), Methodology for self-compacting concretes design, Covilha, Portugal, Beira Interior University, 734. (In Portuguese)
  28. Neville, A.M. (1995), Properties of concrete, fourth edition, Pearson, England, ISBN: 978-0-582-23070-5, 844.
  29. Newlands, M.D., Jones, M.R., Kandasami, S. and Harrison, T.A. (2008), "Sensitivity of electrode contact solutions and contact pressure in assessing electrical resistivity of concrete", Mater. Struct., 41(4), 621-632. https://doi.org/10.1617/s11527-007-9257-6
  30. NP EN 1008 (2003), Mixing water for concrete, specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete, Lisbon, Portugal, IPQ, 22. (In Portuguese)
  31. NP EN 12350-10 (2010), Testing fresh concrete, Part 10: Self-compacting concrete, L-box test, Lisbon, Portugal, IPQ, 12. (In Portuguese)
  32. NP EN 12350-11 (2010), Testing fresh concrete, Part 11: Self-compacting concrete, Sieve segregation test, Lisbon, Portugal, IPQ, 12. (In Portuguese)
  33. NP EN 12350-12 (2010), Testing fresh concrete, Part 12: Self-compacting concrete, J-ring test, Lisbon, Portugal, IPQ, 14. (In Portuguese)
  34. NP EN 12350-8 (2010), Testing fresh concrete, Part 8: Self-compacting concrete, Slump-flow test, Lisbon, Portugal, IPQ, 12. (In Portuguese)
  35. NP EN 12350-9 (2010), Testing fresh concrete, Part 9: Self-compacting concrete, V-funnel test, Lisbon, Portugal, IPQ, 11. (In Portuguese)
  36. NP EN 12390-3 (2011) Ed. 3, Testing hardened concrete, Part 3: Compressive strength of test specimens, Lisbon, Portugal, IPQ, 21. (In Portuguese)
  37. NP EN 12620, 2002 + A1 (2010), Aggregates for concrete, Lisbon, Portugal, IPQ, 61. (In Portuguese)
  38. NP EN 197-1, 2001 / A3 (2008), Cement, Part 1: Composition, specifications and conformity criteria for common cements, Lisbon, Portugal, IPQ, 8. (In Portuguese)
  39. NP EN 206-1 (2007), Concrete, Part 1: Specification, performance, production and conformity, Lisbon, Portugal, IPQ, 84. (In Portuguese)
  40. NP EN 206-9 (2010), Concrete, Part 9: Additional rules for self-compacting concrete (SCC), Lisbon, Portugal, IPQ, 35. (In Portuguese)
  41. NP EN 450-1, 2005 + A1, (2008), Fly ash for concrete, Part 1: Definition, specifications and conformity criteria, Lisbon, Portugal, IPQ, 35. (In Portuguese)
  42. NP EN 450-2 (2006), Fly ash for concrete, Part 2: Conformity evaluation (in Portuguese), Lisbon, Portugal, IPQ, 29. (In Portuguese)
  43. NP EN 934-1 (2008), Admixtures for concrete, mortar and grout, Part 1: Common requirements, Lisbon, Portugal, IPQ, 13. (In Portuguese)
  44. NP EN 934-2 (2009), Admixtures for concrete, mortar and grout, Part 2: concrete admixtures, definitions, requirements, conformity, marking and labelling, Lisbon, Portugal, IPQ, 28. (In Portuguese)
  45. Okamura, H., Ozawa, K. and Ouchi, M. (2000), Self-compacting concrete, Fib Struct. Concrete, 1(1), 3-17. https://doi.org/10.1680/stco.2000.1.1.3
  46. Polder, R. (2000), "Test methods for on-site measurement of resistivity of concrete", RILEM TC 154-EMC: electrochemical techniques for measuring metallic corrosion, Mater. Struct., 33, 603-611. https://doi.org/10.1007/BF02480599
  47. Ramezanianpour, A., Ghiasvand, E., Nickseresht, I., Mahdikhani, M. and Moodi, F. (2009), "Influence of various amounts of limestone powder on performance of Portland limestone cement concretes", Cement Concrete Comp., 31(10), 715-720. https://doi.org/10.1016/j.cemconcomp.2009.08.003
  48. Sahmaran, M., Yaman, O. and Tokyay, M. (2009), "Transport and mechanical properties of self-consolidating concrete with high volume fly ash", Cement Concrete Comp., 31(2), 99-106. https://doi.org/10.1016/j.cemconcomp.2008.12.003
  49. Sengul, O. and Gjorv, O.E. (2008), "Electrical resistivity measurements for quality control during concrete construction", ACI Mater. J., 105(6), 541-547.
  50. Shi, C. (2004), "Effect of mixing proportions of concrete on its electrical conductivity and the rapid chloride permeability test (ASTM C1202 or ASSHTO T277) results", Cement Concrete Res., 34(3), 537-545. https://doi.org/10.1016/j.cemconres.2003.09.007
  51. Silva, P.M., Brito, J. de and Costa, J.M. (2008), Use of self-compacting concrete (SCC): economic viability analysis, BE2008 - National Meeting of Structural Concrete, Guimaraes. (In Portuguese)
  52. Silva, P.M., Brito, J. de and Costa, J.M. (2011), "Viability of two new mix design methodologies for SCC", ACI Mater. J., 108(6), 579-588.
  53. Tang, L., Andalen, A., Johansson, J. and Hjelm S. (1999), "Chloride diffusivity of self-compacting concrete", Proceedings pro007: First International RILEM Symposium on Self-Compacting Concrete, Stockholm, Sweden, 1999, RILEM Publications S.A.R.L., ISBN: 2-912143-09-8, 187-198.
  54. Whiting, D.A. and Nagi, M.A. (2003), Electrical resistivity of concrete: A literature review, PCA R&D Serial No. 2457, Portland Cement Association, Skokie, Illinois, USA, 57 p.
  55. Zhu, W. and Bartos, J.M. (2003), "Permeation properties of self-compacting concrete", Cement Concrete Res., 33(6), 921-926. https://doi.org/10.1016/S0008-8846(02)01090-6
  56. Zhu, W., Quinn, J. and Bartos, J.M. (2001), "Transport properties and durability of self-compacting concrete", Proceedings of 2nd International Symposium on Self-Compacting Concrete, Tokyo, Japan, 451-458.

Cited by

  1. Mechanical strengths of self compacting concrete containing sawdust-ash and naphthalene sulfonate vol.2, pp.4, 2014, https://doi.org/10.12989/acc.2014.2.4.301
  2. Carbonation and electrical resistance of self compacting concrete made with recycled concrete aggregates and metakaolin vol.121, 2016, https://doi.org/10.1016/j.conbuildmat.2016.06.009
  3. Strength evaluation of concrete with fly ash and GGBFS as cement replacing materials vol.3, pp.3, 2015, https://doi.org/10.12989/acc.2015.3.3.223
  4. Experimental study of the mechanical properties and durability of self-compacting mortars with nano materials (SiO2 and TiO2) vol.96, 2015, https://doi.org/10.1016/j.conbuildmat.2015.08.049
  5. Maximum coarse aggregate’s volume fraction in self-compacting concrete for different flow restrictions vol.113, 2016, https://doi.org/10.1016/j.conbuildmat.2016.03.143
  6. Influence of recycled aggregates and high contents of fly ash on concrete fresh properties vol.84, 2017, https://doi.org/10.1016/j.cemconcomp.2017.09.009
  7. The effect of cement type on long-term transport properties of self-compacting concretes vol.96, 2015, https://doi.org/10.1016/j.conbuildmat.2015.08.097
  8. Potential use of mine tailings and fly ash in concrete vol.3, pp.1, 2015, https://doi.org/10.12989/acc.2015.3.1.055
  9. Properties of pervious concrete containing high-calcium fly ash vol.17, pp.3, 2016, https://doi.org/10.12989/cac.2016.17.3.337
  10. Indirect evaluation of the compressive strength of recycled aggregate concrete with high fly ash ratios vol.70, pp.4, 2018, https://doi.org/10.1680/jmacr.17.00216
  11. A brief on high-volume Class F fly ash as cement replacement – A guide for Civil Engineer vol.4, pp.2, 2015, https://doi.org/10.1016/j.ijsbe.2015.10.002
  12. Mix design of structural lightweight self-compacting concrete incorporating coarse lightweight expanded clay aggregates vol.166, 2018, https://doi.org/10.1016/j.conbuildmat.2018.01.161
  13. Methodology for the mix design of self-compacting concrete using different mineral additions in binary blends of powders vol.64, 2014, https://doi.org/10.1016/j.conbuildmat.2014.04.021
  14. Fresh-state Properties of Self-compacting Mortar and Concrete with Combined Use of Limestone Filler and Fly Ash vol.18, pp.5, 2015, https://doi.org/10.1590/1516-1439.028715
  15. Concrete with High Volume of Recycled Concrete Aggregates and Fly Ash: Shrinkage Behavior Modeling pp.0889-325X, 2019, https://doi.org/10.14359/51710964
  16. Permeability and mechanical properties of binary and ternary cementitious mixtures vol.5, pp.5, 2013, https://doi.org/10.12989/acc.2017.5.5.423
  17. Utilization of Kota stone slurry powder and accelerators in concrete vol.23, pp.3, 2013, https://doi.org/10.12989/cac.2019.23.3.189
  18. The study of fly ash filler behaviour in the polymer matrix of polyethyleneterephthalate vol.1, pp.None, 2013, https://doi.org/10.15328/cb1018
  19. Performance of self-compacting concrete with manufactured crushed sand vol.7, pp.2, 2013, https://doi.org/10.12989/acc.2019.7.2.087