DOI QR코드

DOI QR Code

저온용 고장력강(EH36)의 평균 응력 삼축비에 따른 파단 변형률 정식화

Formulation of Failure Strain according to Average Stress Triaxiality of Low Temperature High Strength Steel (EH36)

  • 정준모 (인하대학교 조선해양공학과) ;
  • 남웅식 (인하대학교 조선해양공학과)
  • Choung, Joonmo (Department of Naval Architecture and Ocean Engineering, Inha University) ;
  • Nam, Woongshik (Department of Naval Architecture and Ocean Engineering, Inha University)
  • 투고 : 2013.01.18
  • 심사 : 2013.04.19
  • 발행 : 2013.04.30

초록

Stress triaxiality is recognized as one of the most important factors for predicting the failure strain of ductile metals. This study dealt with the effect of the average stress triaxiality on the failure strain of a typical low-temperature high-strength marine structural steel, EH36. Tensile tests were carried out on flat specimens with different notches, from relatively smooth to very sharp levels. Numerical simulations of each specimen were performed by using ABAQUS. The failure initiation points in numerical simulations were identified from a comparison of the engineering stress vs. strain curves obtained from experiments with simulated ones. The failure strain curves for various dimensionless critical energy levels were established in the average stress triaxiality domain and compared with the identified failure strain points. It was observed that most of the failure initiation points were approximated with a 100% dimensionless critical energy curve. It was concluded that the failure strains were well expressed as a function of the average stress triaxiality.

키워드

참고문헌

  1. American Society for Testing and Materials (ASTM), 2004. E8- 04 Standard Test Methods for Tension Testing of Metallic Materials. ASTM.
  2. Bai, Y., Wierzbicki, T., 2008. A New Model of Metal Plasticity and Fracture with Pressure and Lode Dependence. International Journal of Plasticity, 24, 1071-1096. https://doi.org/10.1016/j.ijplas.2007.09.004
  3. Bai, Y., Wierzbicki, T., 2010. Application of Extended Mohr- Coulomb Criterion to Ductile Fracture. International Journal of Fracture, 161, 1-20. https://doi.org/10.1007/s10704-009-9422-8
  4. Bao, Y., Wierzbicki, T., 2004. On Fracture Locus in the Equivalent Strain and Stress triaxiality space. International Journal of Mechanical Sciences, 46, 81-98. https://doi.org/10.1016/j.ijmecsci.2004.02.006
  5. Beese, A.M., Mohr, D., 2011. Effect of Stress Triaxiality and Lode Angle on the Kinetics of Strain-Induced Austeniteto- Martensite Transformation. Acta Materialia, 59(7), 2589-2600 https://doi.org/10.1016/j.actamat.2010.12.040
  6. Choung, J., 2009. Comparative Studies of Fracture Models for Marine Structural Steels. Ocean Engineering, 36, 1164-1174. https://doi.org/10.1016/j.oceaneng.2009.08.003
  7. Choung, J., Shim, C.S., Kim, K.S., 2011a. Plasticity and Fracture Behaviors of Marine Structural Steel, Part II: Theoretical Backgrounds of Fracture. Journal of Ocean Engineering and Technology, 25(2), 92-100. https://doi.org/10.5574/KSOE.2011.25.2.092
  8. Choung, J., Shim, C.S., Kim, K.S., 2011b. Plasticity and Fracture Behaviors of Marine Structural Steel, Part III: Experimental study on Failure Strain. Journal of Ocean Engineering and Technology, 25(3), 53-66. https://doi.org/10.5574/KSOE.2011.25.3.053
  9. Choung, J., Shim C.S., Song H.C., 2012. Estimation of Failure Strain of EH36 High Strength Marine Structural Steel using Average Stress Triaxiality. Marine Structures, 29, 1-21. https://doi.org/10.1016/j.marstruc.2012.08.001
  10. Dunand, M., Mohr, D., 2011. On the Predictive Capabilities of the Shear Modified Gurson and the Modified Mohr-Coulomb Fracture Models over a Wide Range of Stress Triaxialities and Lode Angles. Journal of the Mechanics and Physics of Solids, 59, 1374-1394. https://doi.org/10.1016/j.jmps.2011.04.006
  11. Hancock, J.W., Mackenzie, A.C., 1976. On the Mechanisms of Ductile Failure in High-Strength Steels subjected to Multi-Axial Stress-States. Journal of the Mechanics and Physics of Solids, 24, 147-160. https://doi.org/10.1016/0022-5096(76)90024-7
  12. Lehmann, E., Yu, X., 1998. On Ductile Rupture Criteria for Structural Tear in the Case of Ship Collision and Grounding. Proceedings of the 7th International Symposium on Practical Design of Ships and Mobile Units. 141-147.
  13. Luo, M., Wierzbicki, T., 2010. Numerical Failure Analysis of a Stretch-Bending Test on Dual-Phase Steel Sheets using a Phenomenological Fracture Model. International Journal of Solids and Structures, 47, 3804-3102.
  14. Luo, M., Dunand, M., Mohr, D., 2012. Experiments and Modeling of Anisotropic Aluminum Extrusions under Multi-Axial Loading - Part II: Ductile fracture. International Journal of Plasticity, 32-33, 36-58. https://doi.org/10.1016/j.ijplas.2011.11.001
  15. McClintock F.A., 1968. A Criterion of Ductile Fracture by the Growth of Holes. Journal of Applied Mechanics, 35, 363-371. https://doi.org/10.1115/1.3601204
  16. Rice J.R., Tracey, D.M., 1969. On the Ductile Enlargement of Voids in Triaxial Stress Fields. Journal of the Mechanics and Physics of Solids, 17, 201-217. https://doi.org/10.1016/0022-5096(69)90033-7
  17. Tornqvist, R., 2003. Design of Crashworthy Ship Structures. Technical University of Denmark, Ph.D Thesis.
  18. Urban, J., 2003. Crushing and Fracture of Lightweight Structures. Technical University of Denmark, Ph.D Thesis.

피인용 문헌

  1. Fracture Simulation of Low-Temperature High-Strength Steel (EH36) using User-Subroutine of Commercial Finite Element Code vol.28, pp.1, 2014, https://doi.org/10.5574/KSOE.2014.28.1.034
  2. Development of Three Dimensional Fracture Strain Surface in Average Stress Triaxiaility and Average Normalized Lode Parameter Domain for Arctic High Tensile Steel: Part I Theoretical Background and Experimental Studies vol.29, pp.6, 2015, https://doi.org/10.5574/KSOE.2015.29.6.445
  3. Development of Three-Dimensional Fracture Strain Surface in Average Stress Triaxiaility and Average Normalized Lode Parameter Domain for Arctic High Tensile Steel: Part II Formulation of Fracture Strain Surface vol.29, pp.6, 2015, https://doi.org/10.5574/KSOE.2015.29.6.454
  4. Punching Fracture Simulations of Circular Unstiffened Steel Plates using Three-dimensional Fracture Surface vol.30, pp.6, 2016, https://doi.org/10.5574/KSOE.2016.30.6.474
  5. Ductile Fracture Predictions of High Strength Steel (EH36) using Linear and Non-Linear Damage Evolution Models vol.31, pp.4, 2017, https://doi.org/10.26748/KSOE.2017.08.31.4.288