참고문헌
- Tsai, L. W., 1999, Robot Analysis: The Mechanics of Serial and Parallel Manipulators, Wiley-Interscience, New York.
- Kim, H. S., 2010, "Development of a New 6-DOF Parallel-type Motion Simulator," Korean Society of Machine Tool Engineers, Vol. 19, No. 2, pp. 171-177.
- Gogu, G., 2008, Structural Synthesis of Parallel Robots, Part 1: Methodology, Springer, Netherlands.
- Clavel, R., 1988, "Delta, a Fast Robot with Parallel Geometry," 18th International Symposium on Industrial Robots, Sydney, Australia, pp. 91-100.
- Tsai, L. W., 1996, "Kinematics of a Three-DOF Platform Manipulator with Three Extensible Limbs," in Advances in Robot Kinematics, Edited by J. Lenarcic and V. Parenti-Castelli, Kluwer Academic Publishers, Dordrecht, pp. 401-410.
- Kim, H. S., and Tsai, L. W., 2003, "Design Optimization of a Cartesian Parallel Manipulator," Journal of Mechanical Design, Vol. 125, No. 1, pp. 43-51. https://doi.org/10.1115/1.1543977
- Chablat, D., and Wenger, P., 2003, "Architecture Optimization of a 3-DOF Translational Parallel Mechanism for Machining Applications, the Orthoglide," IEEE Trans. On Robotics and Automation, Vol. 19, No. 3, pp. 403-410. https://doi.org/10.1109/TRA.2003.810242
- Liu, X. J., 2005, "Optimal Kinematic Design of a Three Translational DoFs Parallel Manipulator," Robotica, Vol. 24, No. 2, pp. 239-250. https://doi.org/10.1017/S0263574705002079
- Dong, J., Yuan, C., Stori, J. A., and Ferreira, P. M., 2004, "Development of a High-speed 3-axis Machine Tool using a Novel Parallel-kinematics X-Y Table," International Journal of Machine Tools and Manufacture, Vol. 44, No. 12, pp. 1355-1371. https://doi.org/10.1016/j.ijmachtools.2004.04.009
- Li, Y., and Xu, Q., 2006, "A Novel Design and Analysis of a 2-DOF Compliant Parallel Micromanipulator for Nanomanipulation," IEEE Trans. on Automation Science and Engineering, Vol. 3, No. 3, pp. 248-254.
- Liu, X. J., Wang, Q. M., and Wang, J., 2004, "Kinematics, Dynamics and Dimensional Synthesis of a Novel 2-DOF Translational Manipulator," Journal of Intelligent and Robotic Systems, Vol. 41, pp. 205-224.
- Liu, X. J., and Wang, J., 2003, "Some New Parallel Mechanisms Containing the Planar Four-Bar Parallelogram," The International Journal of Robotics Research, Vol. 22, No. 9, pp. 717-732. https://doi.org/10.1177/02783649030229003
- Gao, F., Liu, X., and Gruver, W. A., 1998, "Performance Evaluation of Two-Degree-Of-Freedom Planar Parallel Robots," Mechanisms and Machine Theory, Vol. 33, No. 6, pp. 661-668. https://doi.org/10.1016/S0094-114X(97)00102-X
- Atia, K. R., and Cartmell, M. P., 1999, "A General Dynamic Model for a Large-Scale 2-DOF Planar Parallel Manipulator," Robotica, Vol. 17, pp. 675-683. https://doi.org/10.1017/S0263574799001794
- Liu, X. J., Wang, J., and Pritschow, G., 2006, "On the Optimal Kinematic Design of the PRRRP 2-DOF Parallel Mechanism," Mechanism and Machine Theory, Vol. 41, pp. 1111-1130. https://doi.org/10.1016/j.mechmachtheory.2005.10.008
- Kim, H. S., 2007, "Development of Two Types of Novel Planar Translational Parallel Manipulators by using Parallelogram Mechanism," Journal of the Korean Society of Precision Engineering, Vol, 24, No. 8, pp. 50-57
피인용 문헌
- A novel 2-DOF planar translational mechanism composed by scissor-like elements vol.8, pp.1, 2017, https://doi.org/10.5194/ms-8-179-2017
- Dynamic Trajectory Planning and Geometric Analysis of a Two-Degree-of-Freedom Translational Cable-Suspended Planar Parallel Robot Using a Parallelogram Cable Loop vol.11, pp.2, 2013, https://doi.org/10.1115/1.4042486