References
- Selamet, A. and Ji, Z. L., 1999, Acoustic Attenuation Performance of Circular Expansion Chambers with Extended Inlet/Outlet, Journal of Sound and Vibration, Vol. 223, No. 2, pp. 197-212. https://doi.org/10.1006/jsvi.1998.2138
- Barbieri, R. and Barbieri, N., 2006, Finite Element Acoustic Simulation Based Shape Optimization of a Muffler, Applied Acoustics, Vol. 67, No. 4, pp. 346-357. https://doi.org/10.1016/j.apacoust.2005.06.007
- Selamet, A., Denia, F. D. and Besa, A. J., 2003, Acoustic Behavior of Circular Dual-chamber Mufflers, Journal of Sound and Vibration. Vol. 265, No. 5, pp. 967-985. https://doi.org/10.1016/S0022-460X(02)01258-0
- Lee, J. W. and Kim, Y. Y., 2007, Muffler Design Using a Topology Optimization Method, Proceedings of the KSNVE Annual Spring Conference, pp. 1085-1089.
- Munjal, M. L., Rao, K. N. and Sahasrabudhe, A. D., 1987, Aeroacoustic Analysis of Perforated muffler Components, Journal of Sound and Vibration, Vol. 114, No. 2, pp. 173-188. https://doi.org/10.1016/S0022-460X(87)80146-3
- Dokumaci, E., 1996, A Subsystem Approach for Acoustic Analysis of Mufflers Having Identical Perforatedpipes, Journal of Sound and Vibration, Vol. 193, No. 5, pp. 985-1001. https://doi.org/10.1006/jsvi.1996.0326
- Lee, J. W. and Kim, Y. Y., 2009, Topology Optimization of Muffler Internal Partitions for Improving Acoustical Attenuation Performance, International Journal for Numerical Methods in Engineering, Vol. 80, No. 4, pp. 455-477. https://doi.org/10.1002/nme.2645
- Lee, J. W. and Jang, G. W., 2012, Topology Design of Reactive Mufflers for Enhancing Their Acoustic Attenuation Performance and Flow Characteristics Simultaneously, International Journal for Numerical Methods in Engineering, Vol. 91, No. 5, pp. 552-570. https://doi.org/10.1002/nme.4329
- Lee, J. W. and Choi, D. W., 2012, Topology Optimization of Suction Muffler for Noise Attenuation, Proceedings of the International Compressor Engineering Conference at Purdue, pp. 1437-1-6.
- Hwang, Y. H., Lee, J. M. and Kim, S. J., 2002, New Active Muffler System Utilizing Destructive Interference by Difference of Transmission Paths, Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 12, No. 5, pp. 374-379. https://doi.org/10.5050/KSNVN.2002.12.5.374
- Munjal, M. L., Behera, B. K. and Thawani, P. T., 1998, Transfer Matrix Model for the Reverse-flow, Three-duct, Open End Perforated Element Muffler, Applied Acoustics, Vol. 54, No. 3, pp. 229-238. https://doi.org/10.1016/S0003-682X(97)00077-7
- Chang, Y. C. and Chiu, M. C., 2008, Shape Optimization of One-chamber Perforated Plug/Non-plug Mufflers by Simulated Annealing Method, International Journal for Numerical Methods in Engineering, Vol. 74, No. 10, pp. 1592-1620. https://doi.org/10.1002/nme.2226
- Lee, S. H. and Ih, J. G., 2008, Effect of Non-uniform Perforation in the Long Concentric Resonator on Transmission Loss and Back Pressure, Journal of Sound and Vibration, Vol. 311, No. 1-2, pp. 280-296. https://doi.org/10.1016/j.jsv.2007.09.005
- Svanberg, K., 1987, The Method of Moving Asymptotes - A New Method For Structural Optimization, International Journal for Numerical Methods in Engineering, Vol. 24, No. 2, pp. 359-373. https://doi.org/10.1002/nme.1620240207