International Journal of Fluid Machinery and Systems

Korean Society for Fluid machinery (한국유체기계학회)
권호 표지
DOI QR코드

DOI QR Code

An Outlook on the Draft-Tube-Surge Study

  • Nishi, Michihiro (Senior Academy, Kyushu Institute of Technology) ;
  • Liu, Shuhong (State Key Laboratory of Hydroscience and Engineering, Tsinghua University)
  • Accepted : 2013.03.11
  • Published : 2013.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

If large pressure fluctuation is observed in the draft tube of a Francis turbine at part-load operation, we have generally called it draft-tube-surge. As occurrence of this phenomenon seriously affects the limit of turbine operating range, extensive studies on the surge have been made since proposal of surge-frequency criterion given by Rheingans. According to the literature survey of related topics in recent IAHR symposiums on hydraulic machinery and systems, in which state-of-the-art contributions were mainly presented, a certain review of them may be desirable for an outlook on the future studies in this research field. Thus, in this review paper, the authors' previous attempts for the last three decades to challenge the following topics: a rational method for component test of a draft tube, nature of spiral vortex rope and its behavior in a draft tube and cavitation characteristics of pressure fluctuations, are introduced together with other related contributions, expecting that more useful and significant studies will be accomplished in the future.

Keywords

References

  1. Kubota, T. and Matsui, H., 1972, "Cavitation Characteristics of Forced Vortex Core in the Flow of Francis Turbine," Fuji Elec. Rev., Vol. 18, pp. 102-108.
  2. Falvey, H. T., 1971, "Draft Tube Surges," US Bureau of Reclamation Report, REC-ERC-71-42.
  3. Rheingans, W. J., 1940, "Power Swings in Hydroelectric Power Plant," Trans. ASME, Vol. 62, pp. 171-184.
  4. Kubota, T. and Aoki, H., 1979, "Pressure Surge in the Draft Tube of Francis Turbine," IAHR/IUTAM Symp. on Practical Experiences with Flow Induced Vibration, Preprint 2.
  5. Cassidy, J. J., 1969, "Experimental Study and Analysis of Draft Tube Surging," US Bureau of Reclamation Report, REC-OCE- 69-5.
  6. Falvey, H. T. and Cassidy, J. J., 1970, "Frequency and Amplitude of Pressure Surge Generated by Swirling Flow," Trans. IAHR Symp., Stockholm, Sweden, Part 1.
  7. Palde, U. J., 1972, "Influence of Draft Tube Shape on Surging Characteristics of Reaction Turbines," US Bureau of Reclamation Report, REC-ERC-72-24.
  8. Palde, U. J., 1974, "Model and Prototype Turbine Draft Tube Surge Analysis by the Swirl Momentum Method," Proc. IAHR and AIRH Symp., Vienna, Austria.
  9. Fanelli, M., 1996, "Some Present Trends in Hydraulic Machinery Research," Proc. IAHR 18th Symp. on Hydraulic Machinery and Cavitation, Valencia, Spain, Vol. 1, pp. 23-45.
  10. Nishi, M., 1991, Vibration and Oscillation of Hydraulic Machinery, H. Ohashi, Avebury Technical, Aldershot, UK, pp. 210- 225.
  11. Koutnik, J., Nicolet, C., Schoul, G. A. and Avellan, F., 2006, "Overload Surge Event in a Pumped- Storage Power Plant," Proc. 23rd IAHR Symp., Yokohama, Japan, paper 135.
  12. Chen, C., Nicolet, C., Yonezawa, K., Farhat, M., Avellan, F. and Tsujimoto, Y., 2008, "One-dimensional Analysis of Full Load Draft Tube Surge," ASME J. Fluids Eng., Vol. 130, 041106. https://doi.org/10.1115/1.2903475
  13. Chen, C., Nicolet, C., Yonezawa, K., Farhat, M., Avellan, F. and Tsujimoto, Y., 2009, "One-dimensional Analysis of Full Load Draft Tube Surge Considering the Finite Sound Velocity in the Penstock," Int. J. Fluid Machinery and Systems, Vol. 2, pp. 260-268. https://doi.org/10.5293/IJFMS.2009.2.3.260
  14. Dorfler, P., Keller, M. and Braun, O., 2010, "Francis Full-Load Surge Mechanism Identified by Unsteady 2-phase CFD," Proc. 25th IAHR Symp. on Hydraulic Machinery and Systems, Timisoara, Romania, Vol. 1, pp. 198-205.
  15. IEC-60193, 1999, Hydraulic Turbines, Storage Pumps and Pump-Turbines- Model Acceptance Tests, 2nd ed.
  16. Fisher, R. K., Palde, U. and Ulith, P., 1980, "Comparison of Draft Tube Surging of Homologous Scale Models and Prototype Francis Turbines," Proc. IAHR 10th Symp., Tokyo, Japan, Vol. 1, pp. 541-556.
  17. Angelico, G., Muciaccia, F. and Rossi, G., 1986, "Part Load Behavior of a Turbine: a Study on a Complete Model of Hydraulic Power Plant," Proc. 13th IAHR Symp., Montreal, Canada.
  18. Shi, Q., 1994, "Estimation of Draft Tube Pressure Pulsations for Francis Turbines Operating at Part Load Conditions," Proc. 17th IAHR Symp., Beijing, China, Vol. 1, pp. 107-119.
  19. Jacob, T. and Prenat, J. E., 1996, "Francis Turbine Surge: Discussion and Data Base," Proc. 18th IAHR Symp., Valencia, Spain, Vol. 2, pp. 855-864.
  20. Arpe, J. and Avellan, F., 2002, "Pressure Wall Measurements in the Whole Draft Tube: Steady and Unsteady Analysis," Proc. 21st IAHR Symp. on Hydraulic Machinery and Systems, Lausanne, Switzerland, Vol. 2, pp. 593-602.
  21. Ulith, P., Jaeger, E. U. and Strscheletzky, M., 1974, "Contribution to Clarifying the Inception of Nonstationary Phenomena in the Draft tube of High Specific Speed Francis Turbines Operating at Part Load," Proc. IAHR and AIRH 7th Symp., Vienna, Austria, paper III-4.
  22. Hosoi, Y., 1978, "Contributions to Model Tests of Draft Tube Surges of Francis Turbines," Proc. Joint Symp. on Design and Operation of Fluid Machinery, Fort Collins, CO, Vol. 1, pp. 141-150.
  23. Senoo, Y., Kawaguchi, N. and Nagata, T., 1978, "Swirl Flow in Conical Diffusers," Bull. Japan Society of Mechanical Engineers, Vol. 21, pp. 112-119. https://doi.org/10.1299/jsme1958.21.112
  24. Nishi, M., Kubota, T., Matsunaga, S. and Senoo, Y., 1980, "Study on Swirl Flow and Surge in an Elbow Type Draft Tube," Proc. IAHR 10th Symp., Tokyo, Japan, Vol. 1, pp. 557-568.
  25. Nishi, M., Matsunaga, S., Kubota, T. and Senoo, Y., 1982, "Flow Regimes in an Elbow-Type Draft Tube," Proc. IAHR 11th Symp., Amsterdam, Netherlands, Vol. 2, pp. 38/1-13.
  26. Jacob, T., 1993, "Evaluation sur modele reduit et prediction de la stabilite de fonctionnement des turbines Francis," EPFL Thesis, n1146, Lausanne, Switzerland.
  27. Bosioc, A. I., Tanasa, C., Muntean, S. and Susan-Resiga, R. F., 2010, "Unsteady Pressure Measurements and Numerical Investigation of the Jet Control Method in a Conical Diffuser with Swirling Flow," Proc. 25th IAHR Symp. on Hydraulic Machinery and Systems, Timisoara, Romania, Vol. 1, pp. 125-133.
  28. Dorfler, P., 1980, "Mathematical Model of the Pulsations in Francis Turbines Caused by the Vortex Core at Part Load," Escher Wyss News, Vol. 1/2, p. 101.
  29. Nishi, M., Matsunaga, S., Okamoto, M., Uno, M. and Nishitani, K., 1988, "Measurement of Three-Dimensional Periodic Flow in a Conical Draft Tube at Surging Condition," Flows in Non-Rotating Turbomachinery Components, ASME-FED-Vol. 69, pp. 81-88.
  30. Ciocan, G. D. and Iliescu, M. S., 2007, "Vortex Rope Investigation by 3D-PIV Method," Proc. 2nd Int. Meeting of Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, Timisoara, Romania, pp. 159-172.
  31. Kirschner, O. and Ruprecht, A., 2007, "Vortex Rope Measurement in a Simplified Draft Tube," Proc. 2nd Int. Meeting of Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, Timisoara, Romania, pp.173-184.
  32. Wang, X., Nishi, M. and Tsukamoto, H., 1994, "A Simple Model for Predicting the Draft Tube Surge," Proc. 17th IAHR Symp., Beijing, China, Vol. 1, pp. 95-106.
  33. Wang, X. and Nishi, M., 1996, "Swirling Flow with Helical Vortex Core in a Draft Tube Predicted by a Vortex Method," Proc. IAHR 18th Symp. on Hydraulic Machinery and Cavitation, Valencia, Spain, Vol. 2, pp. 965-974.
  34. Kuibin, P., Okulov, V. L., Susan-Resiga, R. F. and Muntean, S., 2010, "Validation of Mathematical Models for Predicting the Swirling Flow and the Vortex Rope in a Francis Turbine Operated at Partial Discharge," Proc. 25th IAHR Symp. on Hydraulic Machinery and Systems, Timisoara, Romania, Vol. 1, pp. 392-400.
  35. Wahl, T. L., Skinner, M. M. and Falvey, H. T., 1991, "The Twin Vortex Draft Tube Surge," Waterpower '91, pp.2011-2020.
  36. Nishi, M., Matsunaga, S., Kubota, T. and Senoo, Y., 1986, "Effect of Draft Tube Shape on the Characteristics of Pressure Surge and Swirl Flow," Proc. 13th IAHR Symp., Montreal, Canada, Vol. 1, pp. 7/1-13.
  37. Shi, Q., 2008, "Experimental Investigation of Upper Part Load Pressure Pulsations for Three Gorges Model Turbine," Proc. 24th IAHR Symp. on Hydraulic Machinery and Systems, Foz do Iguassu, Brazil.
  38. Nicolet, C., Zobeiri, A., Maruzewski, P. and Avellan, F., 2011, "Experimental Investigations on Upper Part Load Vortex Rope Pressure Fluctuations in Francis Turbine Draft Tube," Int. J. Fluid Machinery and Systems, Vol. 4, No. 1, pp. 179-190. https://doi.org/10.5293/IJFMS.2011.4.1.179
  39. Thicke, R. H., 1981, "Practical Solutions for Draft Tube Instability," Water Power & Dam Construction, Vol. 33, pp. 31-37.
  40. Kubota, T. and Yamada, S., 1982, "Effect of Cone Angle at Draft Tube Inlet on Hydraulic Characteristic of Francis Turbine," Proc. IAHR 11th Symp. , Amsterdam, Netherlands, No. 53.
  41. Nishi, M., Matsunaga, S., Kubota, T. and Senoo, Y., 1984, "Surging Characteristics of Conical and Elbow-type Draft Tubes," Proc. IAHR 12th Symp. on Hydraulic Machinery in the Energy Related Industries, Stirling, UK, pp. 272-283.
  42. Nishi, M., Matsunaga, S., Okamoto, M. and Takatsu, K., 1990, "Wall Pressure Measurements as a Diagnosis of Draft Tube Surge," Proc. IAHR 15th Symp. on Modern Technology in Hydraulic Energy Production, Belgrade, Vol. 1, pp. F4/1-12.
  43. Nishi, M., Okamoto, M. and Wang, X., 1993, "Evaluation of Pressure Fluctuations Caused by Cavitated Spiral Vortex Core in the Swirling Flow of Elbow Draft Tube," Proc. 6th Int. Meeting on Behavior of Hydraulic Machinery under Steady Oscillatory Conditions, Lausanne, Switzerland, pp. 4.4/1 - 10.
  44. Nishi, M., Wang, X., Okamoto, M. and Matsunaga, S., 1994, "Further Investigation on the Pressure Fluctuations Caused by Cavitated Vortex Rope in an Elbow Draft Tube," Cavitation and Gas-Liquid Flow in Fluid Machinery and Devices, ASME FEDVol. 190, pp. 63-70.
  45. Nishi, M., Wang, M., Okamoto, M., Ishibashi, H., Fujii, S. and Matsunaga, S., 1993, "Evaluation of the Performance of a Downstream Diffuser with Swirling Inlet Flow," Proc. 4th Asian International Conference on Fluid Machinery, Suzhou, China, Vol. 1, pp. 383-388.
  46. Nishi, M., Wang, X., Yoshida, K., Takahashi, T. and Tsukamoto, T., 1996, "An Experimental Study on Fins: Their Role in Control of the Draft Tube Surging," Proc. 18th IAHR Symp. on Hydraulic Machinery and Cavitation, Valencia, Vol. 2, pp. 905-914.
  47. Nishi, M., Kawai, K., Yoshida, K., Ma, Z. and Qian, H., 1999, "Installation of a Fin as a Means to Alleviate the Draft Tube Surging," Proc. 3rd ASME/JSME Joint Fluids Engineering Conf., San Francisco, CA, FEDSM99-7209.
  48. Nishi, M., Yoshida, K., Ma, Z. and Fujii, M., 2000, "Alleviation of the Pressure Surge Observed in an Elbow Draft Tube by Installation of Fin," Proc. Hydraulic Machinery and Systems 20th IAHR Symp., Charlotte, NC, DY-05.
  49. Nishi, M., Yoshida, K., Fujii, M. and Miyamoto, K., 2002, "A Study on Hybrid Control of Draft Tube Surge," Proc. 21st IAHR Symp. on Hydraulic Machinery and Systems, Lausanne, Switzerland, Vol. 1, pp. 505-510.
  50. Grein, H., 1980, "Vibration Phenomena in Francis Turbines: Their Causes and Prevention," Proc. IAHR 10th Symp., Tokyo, Japan, Vol. 1, pp. 527-539.
  51. Doerfler, P., 1986, "Design Criteria for Air Admission Systems in Francis Turbines," Proc. 13th IAHR Symp., Montreal, Canada, Vol. 1, p. 8.
  52. Biela, V., 1998, "Draft Tube Fins," Proc. 19th IAHR Symp. on Hydraulic Machinery and Cavitation, Singapore, pp. 454-461.
  53. Papillon, B., Sabourin, M., Couston, M. and Deschenes, C., 2002, "Methods for Air Admission in Hydroturbines," Proc. 21st IAHR Symp. on Hydraulic Machinery and Systems, Lausanne, Switzerland, Vol. 1, pp. 499-504.
  54. Vekve, T. and Skare, P. E., 2004, "The Influence of the Pressure Gradient on Draft Tube Flow at Part Load Operation," Proc. 22nd IAHR Symp. on Hydraulic Machinery and Systems, Stockholm, Sweden, B05-3.
  55. Miyagawa, K., Sano, T., Kunimatsu, N., Aki, T. and Nishi, M., 2006, "Mitigation of Draft Tube Flow Instability with Auxiliary Parts in High Head Pump-Turbines," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, F307
  56. Kurokawa, J., Imamura, H. and Choi, Y.-D., 2010, "Effect of J-groove on the Suppression of Swirl Flow in a Conical Diffuser," ASME J. Fluids Eng., Vol. 132, 0711011.
  57. Susan-Resiga, R., Vu, T. C., Muntean, S., Ciocan, G. D. and Nennemann, B., 2006, "Jet Control of the Draft Tube Vortex Rope in Francis Turbines at Partial Discharge," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, F192.
  58. Nakamura, T., Nishizawa, H., Yasuda, M., Suzuki, T. and Tanaka, H., 1996, "Study on High Speed and High Head Reversible Pump-Turbine," Proc. 18th IAHR Symp. on Hydraulic Machinery and Cavitation, Valencia, Spain, Vol. 1, pp. 210-219.
  59. Vu, T. C. and Shyy, W., 1990, "Viscous Flow Analysis as a Design Tool for Hydraulic Turbine Components," ASME J. Fluids Eng., Vol. 112, pp. 5-11. https://doi.org/10.1115/1.2909369
  60. Agouzoul, M., Reggio, M. and Camarero, R., 1990, "Calculation of Turbulent Flows in a Hydraulic Turbine Draft Tube," ASME J. Fluids Eng., Vol. 112, pp. 257-263. https://doi.org/10.1115/1.2909398
  61. Song, C. C. S., Chen, X., Tani, K., Shinmei, K., Niikura, K. and Sato, J., 1999, "Simulation of Cavitating Flows in Francis Turbine and Draft Tube under Off-design Conditions," Proc. 3rd ASME/JSME Joint Fluids Engineering Conf., San Francisco.
  62. Cervantes, M., Gustavsson, L., Page, M. and Engstrom, F., 2006, "Turbine-99 III, a summary," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, Japan.
  63. Avellan, F., 2000, "Flow Investigation in a Francis Draft Tube: the FLINDT Project," Proc. 20th IAHR Symp. on Hydraulic Machinery and Systems, Charlotte, NC.
  64. Skotak, A., 1999, "Draft Tube Swirl Flow Modeling," Proc. 9th Int. Meeting of Work Group on Behavior of Hydraulic Machinery under Steady Oscillatory Conditions, Brno, Czech, D4.
  65. Ruprecht, A., Helmrich, T., Aschenbrenner, T. and Scherer, T., 2002, "Simulation of Vortex Rope in a Turbine Draft Tube," Proc. 21st IAHR Symp. on Hydraulic Machinery and Systems, Lausanne, Switzerland, Vol. 1, pp. 259-266.
  66. Scherer, T., Faigle, P. and Aschenbrenner, T., 2002, "Experimental Analysis and Numerical Calculation of the Rotating Vortex Rope in a Draft Tube Operating at Part Load," Proc. 21st IAHR Symp. on Hydraulic Machinery and Systems, Lausanne, Switzerland, Vol. 1, pp. 267-276.
  67. Miyagawa, K., Tsuji, K., Yahara, J. and Nomura, Y., 2002, "Flow Instability in an Elbow Draft Tube for a Francis Pump- Turbine," Proc. 21st IAHR Symp. on Hydraulic Machinery and Systems, Lausanne, Switzerland, Vol. 1, pp. 277-285.
  68. Skotak, A., Mikulasek, J. and Lhotakova, L., 2002, "Effect of the Inflow Conditions on the Unsteady Draft Tube Flow," Proc. 21st IAHR Symp. on Hydraulic Machinery and Systems, Lausanne, Switzerland, Vol. 1, pp. 287-294.
  69. Sick, M., Dorfler, P., Michler, W., Sallaberger, M. and Lohmberg, A., 2004, "Investigation of the Draft Tube Vortex in a Pump-Turbine," Proc. 22nd IAHR Symp. on Hydraulic Machinery and Systems, Stockholm, Sweden., B11.
  70. Zhou, L., Wang, Z. and Tian, Y., 2006, "Numerical Simulation on Analyzing Vortex Rope in Draft Tube," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, Japan, F102.
  71. Wu, X., Liu, S. and Wu, Y., 2006, "Helicity Application on Analyzing Vortex Rope in Draft Tube," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, Japan, F144.
  72. Gyllenram, W. and Nilsson, H., 2006, "Very Large Eddy Simulation of Draft Tube Flow," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, Japan, F159.
  73. Han, F., Yu, Y., Fan, C. and Kubota, T., 2006, "Dynamic Behavior of Helial Vortex Rope with Dead Core in Bend Draft Tube of Francis Turbine," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, Japan, F183.
  74. Susan-Resiga, R., Ciocan, G. D., Muntean, S., Anton, I. and Avellan, F., 2006, "Numerical Simulation and Analysis of Swirling Flow in the Draft Tube Cone of a Francis Turbine," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, Japan, F211.
  75. Stein, P., Sick, M., Dorfler, P., White, P. and Braune, A., 2006, "Numerical Simulation of the Cavitating Draft Tube Vortex in a Francis Turbine," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, Japan, F228.
  76. Kurosawa, S. and Satou, S., 2006, "Turbulent Flow Simulation for the Draft tube of a Kaplan Turbine," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, Japan.
  77. Wang, Z. and Zhou, L., 2006, "Simulations and Measurements of Pressure Oscillations Caused by Vortex Ropes," ASME J. Fluids Eng., Vol. 128, No. 4, pp. 649-655. https://doi.org/10.1115/1.2201631
  78. Ciocan, G. D., Iliescu, M. S., Vu, T. C., Nennemann, B. and Avellan, F., 2007, "Experimental Study and Numerical Simulation of the FLINDT Draft Tube Rotating Vortex," ASME J. Fluids Eng., Vol. 129, No. 2, pp. 146-158. https://doi.org/10.1115/1.2409332
  79. Zhang, R. K., Mao, F., Wu, J. Z., Chen, S. Y., Wu, Y. L. and Liu, S. H., 2009, "Characteristics and Control of the Draft-Tube Flow in Part-Load Francis Turbine," ASME J. Fluids Eng., Vol. 131, No. 2, 0211011.
  80. Susan-Resiga, R., Muntean, S., Stein, P. and Avellan, F., 2009, "Numerical Prediction of Pressure Pulsation Amplitude for Different Operating Regimes of Franccis Turbine Draft Tubes," Int. J. Fluid Machinery and Systems, Vol. 2, No. 4, pp. 295-302. https://doi.org/10.5293/IJFMS.2009.2.4.295
  81. Lipej, A., Jost, D., Meznar, P. and Djelic, V., 2009, "Experimental Investigations on Upper Part Load Vortex Rope Pressure Fluctuations in Francis Turbine Draft Tube," Int. J. Fluid Machinery and Systems, Vol. 2, No. 4, pp. 375-382. https://doi.org/10.5293/IJFMS.2009.2.4.375
  82. De Henau, V., Payette, F. A., Sabourin, M., Deschnes, C., Gagnon, J. M. and Gouin, P., 2010, "Computational Study of a Low Head Draft Tube and Validation with Experimental Data," Proc. 25th IAHR Symp. on Hydraulic Machinery and Systems, Timisoara, Romania, Vol. 2, pp. 668-676.
  83. Ojima, A., Kamemoto, K., 2010. "Vortex Method Simulation of 3D and Unsteady Vortices in a Swirling Flow Apparatus Experimented in "Politehnica" University of Timisoara," Proc. 25th IAHR Symp. on Hydraulic Machinery and Systems, Timisoara, Romania, Vol. 2, pp. 515-522.
  84. Vu, T. C., Devals, C., Zhang, Y., Nennemann, B. and Guibault, F., 2011, "Steady and Unsteady Flow Computation in an Elbow Draft Tube with Experimental Validation," Int. J. Fluid Machinery and Systems, Vol. 4, No.1, pp. 85-96. https://doi.org/10.5293/IJFMS.2011.4.1.085
  85. Guo, Y., Kato, C. and Miyagawa, K., 2006, Large-Eddy Simulation of Non-cavitating and Cavitating Flows in an Elbow Draft Tube," Proc. 23rd IAHR Symp. on Hydraulic Machinery and Systems, Yokohama, Japan, F195.
  86. Liu, S., Zhang, L., Nishi, M. and Wu, Y., 2009, "Cavitating Turbulent Flow Simulation in a Francis Turbine Based on Mixture Model," ASME J. Fluids Eng., Vol. 131, 0513021.
  87. Liu, S., Wu, Y., Chen, T. and Nishi, M., 2009, "Development of Numerical Performance Test Stand for a Kaplan Turbine," Int. J. Turbo & Jet-Engines, Vol. 24, pp. 253-262.
  88. Kurosawa, S., Lim, S. M. and Enomoto, Y., 2010, "Virtual Model Test for a Francis Turbine," Proc. 25th IAHR Symp. on Hydraulic Machinery and Systems, Timisoara, Romania, Vol. 2, pp. 499-506.

Cited by

  1. Study of the vortex-induced pressure excitation source in a Francis turbine draft tube by particle image velocimetry vol.56, pp.12, 2015, https://doi.org/10.1007/s00348-015-2085-5
  2. Study on Flow Instability and Countermeasure in a Draft tube with Swirling flow vol.8, pp.4, 2015, https://doi.org/10.5293/IJFMS.2015.8.4.230
  3. Quantitative and qualitative analysis of the flow field development through T99 draft tube caused by optimized inlet velocity profiles vol.8, pp.4, 2015, https://doi.org/10.5293/IJFMS.2015.8.4.283
  4. The effect of runner blade loading on the performance and internal flow of a Francis hydro turbine model vol.30, pp.4, 2016, https://doi.org/10.1007/s12206-016-0317-0
  5. Numerical simulation of cavitation surge and vortical flows in a diffuser with swirling flow vol.30, pp.6, 2016, https://doi.org/10.1007/s12206-016-0511-0
  6. LDV survey of cavitation and resonance effect on the precessing vortex rope dynamics in the draft tube of Francis turbines vol.57, pp.11, 2016, https://doi.org/10.1007/s00348-016-2257-y
  7. Vortex rope patterns at different load of hydro turbine model vol.115, pp.2261-236X, 2017, https://doi.org/10.1051/matecconf/201711506004
  8. Vortex rope instabilities in a model of conical draft tube vol.159, pp.2100-014X, 2017, https://doi.org/10.1051/epjconf/201715900048
  9. Suppression of unsteady swirl flow in the draft tube of a Francis hydro turbine model using J-Groove vol.31, pp.12, 2017, https://doi.org/10.1007/s12206-017-1123-z
  10. New insight in Francis turbine cavitation vortex rope: role of the runner outlet flow swirl number pp.1814-2079, 2017, https://doi.org/10.1080/00221686.2017.1356758
  11. Cavitation instabilities in hydraulic machines vol.52, pp.1, 2013, https://doi.org/10.1088/1757-899X/52/1/012005
  12. Experimental Investigation of the Interblade Flow in a Kaplan Runner at Several Operating Points Using Laser Doppler Anemometry vol.138, pp.2, 2015, https://doi.org/10.1115/1.4031609
  13. Cavitation study of a pump-turbine at turbine mode with critical cavitation coefficient condition vol.129, pp.1757-899X, 2016, https://doi.org/10.1088/1757-899X/129/1/012037
  14. Computational and Theoretical Analyses of the Precessing Vortex Rope in a Simplified Draft Tube of a Scaled Model of a Francis Turbine vol.139, pp.2, 2017, https://doi.org/10.1115/1.4034693
  15. Comparative analysis of twin vortex ropes in laboratory models of two hydro-turbine draft-tubes vol.54, pp.4, 2016, https://doi.org/10.1080/00221686.2016.1168325
  16. Investigation of the unsteady pressure pulsations in the prototype Francis turbines during load variation and startup vol.9, pp.6, 2017, https://doi.org/10.1063/1.4994884
  17. Experimental observation of the precessing-vortex-core reconnection phenomenon in a combined-flow turbine vol.43, pp.11, 2017, https://doi.org/10.1134/S1063785017110086
  18. Study of Pressure Shock Caused by a Vortex Ring Separated From a Vortex Rope in a Draft Tube Model vol.139, pp.8, 2017, https://doi.org/10.1115/1.4036264
  19. Proper Orthogonal Decomposition of Self-Induced Instabilities in Decelerated Swirling Flows and Their Mitigation Through Axial Water Injection vol.139, pp.8, 2017, https://doi.org/10.1115/1.4036244
  20. Investigations of Compressible Turbulent Flow in a High-Head Francis Turbine vol.140, pp.1, 2018, https://doi.org/10.1115/1.4037500
  21. Predictive control of spiral vortex breakdown vol.842, pp.1469-7645, 2018, https://doi.org/10.1017/jfm.2018.124
  22. Numerical investigation on radial impeller induced vortex rope in draft tube under partial load conditions vol.32, pp.1, 2018, https://doi.org/10.1007/s12206-017-1217-7
  23. Suppression of cavitation in the draft tube of Francis turbine model by J-Groove pp.2041-2983, 2018, https://doi.org/10.1177/0954406218802310
  24. Hydraulic Stability Analysis of a Large Prototype Francis Turbine Based on Field Test vol.140, pp.11, 2018, https://doi.org/10.1115/1.4040973
  25. Experimental and numerical study of ventilation cavitation around a NACA0015 hydrofoil with special emphasis on bubble evolution and air-vapor interactions vol.35, pp.3, 2018, https://doi.org/10.1108/EC-01-2017-0020
  26. Experimental Investigation of a Francis Turbine during Exigent Ramping and Transition into Total Load Rejection vol.144, pp.6, 2018, https://doi.org/10.1061/(ASCE)HY.1943-7900.0001471