References
- H. S. Son, 2007, High Temperature Forming Analysis for Hot Press Forming, POSCO Conf. Vol. 12, No. 2, pp. 80-85.
- N. H. Kim, K. Y. Kwon, C. G. Kang, 2009, KSME Spring Conf.(editor: E. S. Lee), Kor. Soc. Mech. Eng., Daejeon, Korea, pp. 78-83.
- W. J. Bang, J. Y. Nam, S. J. Kim, H. S. Kim, 2000, Proceedings of the 7th Symposium on Steel Technology, Korean Inst. Mater., Seoul, Korea, pp. 98-101.
- T. Altan, 2006, Hot-stamping Boron-alloyed Steels for Automotive Parts PartΙ : Process Methods and Uses, Stamping J., pp. 40-41
- K. P. Kang, K. H. Lee, Y. S. Kim, M. W. Ji, Y. S. Suh, 2008, Prediction of Phase Transformation of Boron Steel Sheet during Hot Press Forming using Material Properties Modeler and DEFORM-HT, Trans. Mater. Process., Vol. 17, No. 4, pp. 249-256. https://doi.org/10.5228/KSPP.2008.17.4.249
- M. S. Chae, G. D. Lee, K. H. Lee, Y. S. Kim, 2009, Mechanical and Forming Characteristics of High-Strength Boron-Alloyed Steel with Hot Forming, Trans. Mater. Process., Vol. 18, No. 3, pp. 236-244. https://doi.org/10.5228/KSPP.2009.18.3.236
- Y. S. Suh, K. H. Lee, Y. S. Kim, 2010, Application and Verification of Virtual Manufacturing to Hot Press Forming Process with Boron Steel, Trans. KSAE., Vol. 18, No. 2, pp. 61-66.
- H. Karbasian, A. E. Tekkaya, 2010, A Review on Hot Stamping, J. Mater. Process. Technol., Vol. 210, No. 15, pp. 2103-2118. https://doi.org/10.1016/j.jmatprotec.2010.07.019
- Y. Desalos, F. Gunsberg, 1982, Deformations et contraintes lors du traitement thermique de pieces en acier, Report No. 902, IRSID, St-Germain-en-Laye.
- K. H. Lee, E. J. Kwak, H. Y. Kim, G. D. Lee, J. K. Park, C. H. Suh, 2009, Study on the design of quenching fixture in hot press forming process, Proc. Kor. Soc. Tech. Plast. Conf. pp. 337-340.
- J. S. Lee, M. S. Chae, C. D. Park, Y. S. Kim, 2007, KSME Spring Conf.(editor: D. I. Kim), Kor. Soc. Mech. Eng., Busan, Korea, pp. 344-349.
- J. Cui, C. Lei, Z. Xing, C. Li, 2012, Microstructure Distribution and Mechanical Properties Prediction of Boron Alloy During Hot Forming using FE Simulation, Mater. Sci. Eng. A, Vol. 535, pp. 241-251. https://doi.org/10.1016/j.msea.2011.12.075
Cited by
- Tough High Thermal-Conductivity Tool Steel for Hot Press Forming vol.15, pp.3, 2016, https://doi.org/10.14775/ksmpe.2016.15.3.130
- Thermo-mechanical Simulation of Boron Steel Cylinders during Heating and Rapid Cooling vol.23, pp.8, 2014, https://doi.org/10.5228/KSTP.2014.23.8.475
- Springback Prediction of Tailor Rolled Blank in Hot Stamping Process by Partial Heating vol.25, pp.6, 2016, https://doi.org/10.5228/KSTP.2016.25.6.396