소성∙가공 (Transactions of Materials Processing)

  • 제22권2호
  • /
  • Pages.67-73
  • /
  • 2013
  • /
  • 1225-696X(pISSN)
  • /
  • 2287-6359(eISSN)
한국소성∙가공학회 (The Korean Society for Technology of Plasticity and materials processing)
권호 표지
DOI QR코드

DOI QR Code

원형 동관의 2축압축 변형특성 및 조직변화에 관한 연구

Biaxial Compressive Deformation Characteristics and Microstructure Change in a Round Copper Pipe

  • Yoo, C.K. ;
  • Won, S.T. (Dept. of Mechanical System Design Engineering, Seoul National University of Science & Technology)
  • 투고 : 2012.12.03
  • 심사 : 2013.03.08
  • 발행 : 2013.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The deformation characteristics and microstructure changes in a round copper pipe under biaxial compression was studied using a horizontal compression die. The change of material properties, punch load and deformation behavior were monitored using various compressive deformation rates in the range of 0.5mm/min.~450mm/min. The strains, either tensile or compressive, were estimated from Vickers microhardness test results. The punch load and deformation characteristics of the round copper pipes were found to change greatly at a deformation rate of about 200mm/min. The punch load decreased with increasing compressive deformation rate. The results of numerical simulations agreed well with what was expected from the final microstructure and the hardness profile estimated from the final deformation strains.

키워드

참고문헌

  1. M. Gotoh, Y. Shibata, 1990, Elastic-Plastic Analysis of Uni-Lateral and Bi- Lateral Compression of A Circular cylinder by Flat Plates, J. Soc. Mech. Eng. Int. J. Ser. A, Vol. 56, No. 529, pp. 2002-2010.
  2. M. Gotoh, C. K. Yoo, 1992, The 43rd JSTP Joint Conference(editor: Toshitugu Majaki), Kyoto-shi, Japan, pp. 561-564.
  3. M. Gotoh, C. K. Yoo, 1993, Proc. JSTP Spring Conf.(editor: Kouhe Nakajima), Tsukuba-shi, Japan, pp. 221-224.
  4. S. T. Won, C. T. Kim, C. K. Yoo, K. J. Kim, W. K. Kim, J. J. Yoo, 2010, Proc. Kor. Soc. Precis. Eng. Spring Conf.(editor: E. S. Lee), Jeju-do(Ramada Plaza Hotel), Korea, pp. 1167-1168.
  5. C. K. Yoo, K. J. Kim, S. T. Won, 2012, Biaxial Compressive Deformation Characteristics of Round Aluminum Pipe, Trans. Mater. Process., Vol. 21, No. 2, pp. 89-95. https://doi.org/10.5228/KSTP.2012.21.2.89
  6. E. Rabinowicz,1995, Friction and Wear of Materials, John Wiely & Sons, Inc., N.Y., pp. 261-263

피인용 문헌

  1. Biaxial Compressive Deformation Characteristics of Double Round Copper Pipes vol.23, pp.1, 2014, https://doi.org/10.5228/KSTP.2014.23.1.35