Abstract
A number of highway projects are in progress in Korea to accommodate increasing transportation demands. As the highway route becomes more complex, some projects include tunneling through unconsolidated sedimentary rock. Since an unconsolidated sedimentary rock mainly consists of rock and ground mass, the behavior and characteristics in unconsolidated sedimentary rock tunnel are quite different from typical rock tunnel. However, construction case histories and rock classifications method on unconsolidated sedimentary rock tunnel had not been developed or studied domestically. Consequently the case studies and rock classification system for unconsolidated sedimentary rock are required to better understand its behavior for tunneling. In this study, rock mass classification method is proposed to identify unconsolidated sedimentary rock based on point load and slake durability tests. Based on this, the proposed method of unconsolidated sedimentary rock can be applied well through comparisons with the results of convergence measurement.
본 연구에서는 미고결 퇴적암을 통과하는 국내 최초 터널현장을 대상으로 시공현장의 시추코어를 이용하여 정량적인 슬레이크 내구성 시험과 점하중 강도시험을 통하여 미고결 퇴적암에 대한 정량적인 평가 방법을 제시하고 고결 정도에 따른 적절한 굴착 및 보강방법 등을 제안하고자 한다. 슬레이크 내구성 지수의 경우 3-cycle에서 변화량이 수렴되어 내구성을 구분하는 기준으로 $Id_3$ 값을 사용함이 합리적인 것으로 분석되었으며, 미고결 퇴적암의 $Id_3$ 평균값은 71.80, 점하중 시험결과 평균 일축압축강도 값은 10.8 MPa로 측정되었다. 실험 결과를 분석하여 일축압축강도, 고결상태, 막장확인, 습윤상태, 슬레이크 내구성 지수($Id_3$)를 포함하고 있는 미고결 퇴적암 터널 시공 시 적용 가능한 암반분류 기준을 제안하였다. 또한, 미고결 퇴적암 터널에 적합한 3가지 유형의 지보패턴을 제시하였고, 이는 시공 중인 터널의 내공변위 계측자료를 분석하여 적정성을 검토하였다.