참고문헌
- Zhongqi, Y., Zhongqin, L. and Yixi, Z., 2007, "Evaluation of Fracture Limit in Automotive Aluminum Alloy Sheet Forming," Material and Design, Vol. 203, pp. 203-207.
- Wang, Z. J., Li, Y., Liu, J. G. and Zhang, Y. H., 2007, "Evaluation of Forming Limit in Viscous Pressure Forming of Automotive Aluminum Alloy 6k21-T4 Sheet," Transaction of Nonferrous Metals Society of China, Vol. 17, pp. 1169-1174. https://doi.org/10.1016/S1003-6326(07)60244-1
- Yu, Z. Q., Zhao, Y. X. and Lin, Z. Q., 2004, "Evaluation Parameter of Drawability of Automotive Aluminum Alloy Sheets," The Chinese Journal of Nonferrous Metals, Vol. 14, No. 10, pp. 1689-1693.
- Mohamed, S. M., Alistair, D. F., Jianguo, L., Daniel, S. B. and Trevor, A. D., 2012, "Investigation of Deformation and Failure Features in Hot Stamping of AA6082: Experimentation and Modeling," International Journal of Machine Tool & Manufacture, Vol. 53, pp. 27-38. https://doi.org/10.1016/j.ijmachtools.2011.07.005
- Kim, C. I, Yang, S. H. and Kim, Y. S., 2012, "Prediction of Formability of Aluminum Alloy 5454 Sheet," Trans. Korean Soc. Mech. Eng. A, Vol. 36, No. 2, pp. 179-186. https://doi.org/10.3795/KSME-A.2012.36.2.179
- Miller, W. S., Zhuang, L., Bottenma, J., Wittebrood, A. J., Smet, P. D., Haszler, A. and Vieregge, A., 2000, "Recent Development in Aluminum Alloy for the Automotive Industry," Materials Science & Enginnering A, Vol. A280, pp.37-49. https://doi.org/10.1016/S0921-5093(99)00653-X
- Zhongqi, Y., Zhongqi, L. and Zhao, Y., 2007, "Evaluation of Fracture Limit in Automotive Aluminum Alloy Sheet Forming," Materials & Design, Vol. 28, pp. 203-207. https://doi.org/10.1016/j.matdes.2005.04.010
- Kim, Y. S., 1992, "Recent and Future Development of Stamping Technology for Aluminum Car Body Sheet," Trans. of the KSAE, Vol. 14, No. 1, pp. 3-12.
- Kim, H. S. and Muammer, K., 2008, "Numerical Investigations on Springback Characteristics of Aluminum Sheet Metal Alloys in Warm Forming Conditions," Journal of Materials Processing Technology, Vol. 204, pp. 370-383. https://doi.org/10.1016/j.jmatprotec.2007.11.059
- Toros, S., Ozturk, F. and Kacar, I, 2008, "Review of Warm Forming of Aluminum-Magnesium," Journal of Material Processing Technology, Vol. 207, pp. 1-12. https://doi.org/10.1016/j.jmatprotec.2008.03.057
- Mahabunphachai, S. and Koc, M., 2010, "Investigation on Forming of Aluminum 5052 and 6061 Sheet Alloys at Warm Temperature," Materials and Design, Vol. 31, pp. 2422-2434. https://doi.org/10.1016/j.matdes.2009.11.053
- Daoming, L. and Amit, K. G., 2004, "Biaxial Warm Forming Behavior of Aluminum Sheet Alloys," Journal of Materials Processing Technology, Vol. 145, pp. 281-293. https://doi.org/10.1016/j.jmatprotec.2003.07.003
- Wang, H., Luo, Y. B., Peter, F. Chen, M. H. and Gao, L., 2012, "Warm Forming Behavior of High Strength Aluminum Alloy AA7075," Transaction of Nonferrous Metals Society of China, Vol. 22, pp. 1-7. https://doi.org/10.1016/S1003-6326(11)61131-X
- Sheppard, T., 1999, Extrusion of Aluminum Alloys, Kluwer Academic Publishers.
- David, D. H. and Issam, M., 1996, "Optimization of Quench History of Aluminum Parts for Superior Mechanical Properties," Int. Jour. Heat Mass Transfer, Vol. 39, No.1, pp. 81-85 https://doi.org/10.1016/S0017-9310(96)85008-3
- Myhr, O. R., Grong, O. and Andersen, S. J., 2001, "Modeling of the Age Hardening Behaviour of Al-Mg-Si Alloys," Acta Materialia, Vol. 49, pp. 65-75. https://doi.org/10.1016/S1359-6454(00)00301-3
- Tanner, D. A. and Robinson, J. S., 2004, "Effect of Precipitation During Quenching on the Mechanical Properties of the Aluminum Alloy 7010 in the Wtemper," Journal of Materials Processing Technology, Vol. 153-154, pp. 998-1004. https://doi.org/10.1016/j.jmatprotec.2004.04.226
- Schikorra, M., Donati, L., Tomesani, L. and Tekkaya, E., 2007, "Microstructure Analysis of Aluminum Extrusion: Grain Size Distribution in AA6060, AA6082 and AA7075 Alloys," Journal of Mechanical Science and Technology, Vol. 21, pp. 1445-1451. https://doi.org/10.1007/BF03177357
- ASTM E643-09, Standard Test Method for Ball Punch Deformation of Metallic Sheet Material.
피인용 문헌
- Integrated hot forming and heat treatment process on Al6061 tailor rolled blank vol.18, pp.1, 2017, https://doi.org/10.1007/s12541-017-0016-5