참고문헌
- McNickle, A. D. and Etsion, I., 2004, "Near-Contact Laser Surface Textured Dry Gas Seals," J. of Tribology, Vol. 126, pp. 788-794. https://doi.org/10.1115/1.1792695
- Brizmer, V., Kligerman, Y. and Etsion, I., 2003, "A Laser Surface Textured Parallel Thrust Bearing," Tribology Trans., Vol. 46, pp. 397-403. https://doi.org/10.1080/10402000308982643
- Etsion, I., 2005, "State of the Art in Laser Surface Texturing," J. of Tribology, Vol. 127, pp. 248-253. https://doi.org/10.1115/1.1828070
- Feldman, Y., Kligerman, Y., Etsion, I. and Haber, S., 2006, "The Validity of the Reynolds Equation in Modeling Hydrostatic Effects in Gas Lubricated Textured Parallel Surfaces," J of Tribology, Vol. 128, pp. 345-350. https://doi.org/10.1115/1.2148419
- Brajdic-Mitidieri, P., Gosman, A. D., Ioannnides, E. and Spikes, H. A., 2005, "CFD Analysis of a Low Friction Pocketed Pad Bearing," J. of Tribology, Vol. 127, pp. 803-812. https://doi.org/10.1115/1.2032990
- de Kraker, A., van Ostayen, R. A. J., van Beek, A. and Rixen, D. J., 2007, "A Multiscale Method Modelling Surface Texture Effects," J. of Tribology, Vol. 129, pp. 221-230. https://doi.org/10.1115/1.2540156
- Fowell, M., Olver, A. V., Gosman, A .D., Spikes, H. A. and Pegg, I., 2007, "Entrainment and Inlet Suction: Two Mechanisms of Hydrodynamic Lubrication in Textured Bearings," J. of Tribology, Vol. 129, pp. 336-347. https://doi.org/10.1115/1.2540089
- Marian, V. G., Gabriel, D., Knoll, G. and Filippone, S., 2011, "Theoretical and Experimental Analysis of a Laser Textured Thrust Bearing," Tribology Lett., Vol. 44, pp. 335-343. https://doi.org/10.1007/s11249-011-9857-8
- Shi, X., and Ni, T., 2011, "Effects of Groove Textures on Fully Lubricated Sliding with Cavitation," Tribology Int., Vol. 44, pp. 2022-2028. https://doi.org/10.1016/j.triboint.2011.08.018
- Park, T. J. and Hwang, Y. G., 2009, "Lubrication Characteristics of Laser Textured Parallel Thrust Bearing : Part 1-Effect of Dimple Depth," J. of KSTLE, Vol. 25, No. 5, pp. 305-310.
- Park, T. J. and Hwang, Y. G., 2010, "Lubrication Characteristics of Laser Textured Parallel Thrust Bearing : Part 2-Effect of Dimple Location," J. of KSTLE, Vol. 26, No. 1, pp. 1-6.
- Park, T. J., 2011, "Lubrication Characteristics of Laser Textured Parallel Thrust Bearing : Part 3-Effect of Number of Dimples," J. of KSTLE, Vol. 27, No. 6, pp. 302-307. https://doi.org/10.9725/kstle.2011.27.6.302
- Park, T. J., 2011, "Lubrication Characteristics of Laser Textured Parallel Thrust Bearing : Part 4-Effect of Dimple Shape," J. of KSTLE, Vol. 27, No. 6, pp. 338-343. https://doi.org/10.9725/kstle.2011.27.6.338
- Lee, J. O., Jeong, Y. H., Jang, M., J. and Park, T. J., 2011, "Lubrication Characteristics of a Micro-textured Slider Bearing," Proc. of KSTLE 2011 Fall Conf., pp. 139-140.
- FLUENT, 2009, FLUENT 12.1.2 Manual.
피인용 문헌
- vol.17, pp.2, 2014, https://doi.org/10.5293/kfma.2014.17.2.073
- Lubrication Characteristics of Surface Textured Parallel Thrust Bearing with Ellipsoidal Dimples vol.32, pp.5, 2016, https://doi.org/10.9725/kstle.2016.32.5.147