참고문헌
- Z. Chen, J. M. Guerrero, and F. Blaabjerg, "A review of the state of the art of power electronics for wind turbines", IEEE Trans. on Power Electr., vol. 24, no. 8, pp. 1859-1875, 2009. https://doi.org/10.1109/TPEL.2009.2017082
- I. Munteanu, S. Bacha, A. Bratcu, J. Guiraud, and D. Roye, "Energy-reliability optimization of wind energy conversion systems by sliding mode control", IEEE Trans. on Energy Conv., vol. 23, no. 3, pp. 975-985, 2008. https://doi.org/10.1109/TEC.2008.917102
- S. Grabic, N. Celanovic, and V. Katic, "Permanent magnet synchronous generator cascade for wind turbine applications", IEEE Trans. on Power Electr., vol. 23, no. 3, pp. 1136-1142, 2008. https://doi.org/10.1109/TPEL.2008.921181
- S. J. Oh, M. Y. Cha, J. W. Kim, J. K. Jeong, B. M. Han, and B. H. Chang, "Development of hardware simulator for DFIG wind power system composed of anemometer and motor-generator set", The Transactions of Korean Institute of Power Electronics, vol. 16, no. 1, pp. 11-19, 2011. https://doi.org/10.6113/TKPE.2011.16.1.11
- E. H. Kim, K. B. Kang, J. H. Kim, S. H. Moon, S. B. Oh, and S. H. Kim, "Modeling and analysis of variable wind speed turbine system using back to back converter", Journal of The Korean Institute of Illuminating and Electrical Installation Engineers, vol. 19, no. 8, pp. 150-157, 2005. https://doi.org/10.5207/JIEIE.2005.19.8.150
- D. Y. Yu, Y. S. Choi, H. H. Choi, and J. W. Jung, "Fuzzy speed controller design of permanent magnet synchronous generators for variable-speed wind turbine systems", Journal of The Korean Institute of Illuminating and Electrical Installation Engineers, vol. 25, no. 2, pp. 69-79, 2011.
- A. D. Hansen, and G. Michalke, "Multi-pole permanent magnet synchronous generator wind turbines' grid support capability in uninterrupted operation during grid faults", IET Renewable Power Gener., vol. 3, no. 3, pp. 333-348, 2009. https://doi.org/10.1049/iet-rpg.2008.0055
- S. H. Jang, H. G. Park, D. C. Lee, and H. G. Kim, "Sensorless control of PMSG for small wind turbines", The Transactions of Korean Institute of Power Electronics, vol. 14, no. 1, pp. 15-22, 2009.
- A. H. Kasem, E. F. El-Saadany, H. H. El-Tamaly, and M. A. A. Wahab, "An improved fault ride-through strategy for doubly fed induction generator-based wind turbines", IET Renew. Power Gen., vol. 2, no. 4, pp. 201-214, 2008. https://doi.org/10.1049/iet-rpg:20070092
- ISET Offshore M&R Final Public Report, "Advanced maintenance and repair for offshore wind farms using fault prediction and condition monitoring techniques", funded by the European Commission.
- P. Caselitz, and J. Giebhardt, "Condition monitoring and maintenance strategies for the next generation of large offshore wind turbines", ISET Offshore M&R Final Public Report.
- H. Polinder, H. Lendenmann, R. Chin, and W. M. Arshad, "Fault tolerant generator systems for wind turbines", IEEE International Electric Machines and Drives Conference (IEMDC), pp. 675-681, 2009.
- M. A. Parker, Ng Chong, and Ran Li, "Fault-tolerant control for a modular generator converter scheme for direct-drive wind turbines", IEEE Trans. on Indus. Electr., vol. 58, no. 1, pp. 305-315, 2011. https://doi.org/10.1109/TIE.2010.2045318
- F. Filippetti, G. Franceschini, C. Tassoni, and P. Vas, "Recent developments of induction motor drives fault diagnosis using AI techniques", IEEE Trans. on Indus. Electr., vol. 47, no. 5, pp. 994-1004, 2000.
- M. A. Awadallah, M. M. Morcos, S. Gopalakrishnan, and T. W. Nehl, "A neuro-fuzzy approach to automatic diagnosis and location of stator inter-turn faults in CSI-fed PM brushless DC motors", IEEE Trans. Energy Conv., vol. 20, no. 2, pp. 253-259, 2005. https://doi.org/10.1109/TEC.2005.847976
- R. L. A. Ribeiro, C. B. Jacobina, E. R. C. Silva, and A. M. N. Lima, "Fault detection of open-switch damage in voltage-fed PWM motor drive systems", IEEE Trans. Power Electr., vol. 18, no. 2, pp. 587-593, 2003. https://doi.org/10.1109/TPEL.2003.809351
- R. Spee, and A. K. Wallace, "Remedial strategies for brushless DC drive failures", IEEE Trans. Indus. Appl. vol. 26, no. 2, pp. 259-266, 1990. https://doi.org/10.1109/28.54251
- T. H. Liu, J. R. FU, and T. A. Lipo, "A strategy for improving reliability of field-oriented controlled induction motor drives", IEEE Trans. Indus. Appl. vol. 29, no. 5, pp. 910-918, 1993. https://doi.org/10.1109/28.245714
- S. Heier, and R. Waddington, Grid Integration of Wind Energy Conversion Systems. John Wiley & Sons, 2006.
- P. C. Krause, Analysis of Electric Machinery. New York: McGraw-Hill, 1986.
- C. K. Chun, and C. U. Kim, "Current sensorless three phase PWM AC/DC boost converter with unity power factor", Journal of The Korean Institute of Illuminating and Electrical Installation Engineers, vol. 17, no. 6, pp. 105-112, 2003. https://doi.org/10.5207/JIEIE.2003.17.6.105
- J. J. Kim, and S. H. Song, "PSCAD / EMTDC simulation model of variable speed wind power generation system using permanent magnet synchronous machine", The Transactions of Korean Institute of Power Electronics, vol. 10, no. 6, pp. 610-617, 2005.
- R. C. Dorf, and R. H. Bishop, Modern Control Systems. Prentice-Hall International Editions, 2005.
- H. W. van der Broeck, H. C. Skudelny, and G. V. Stanke, "Analysis and realization of a pulsewidth modulator based on voltage space vectors", IEEE Trans. on Ind. Appl., vol. 24, no. 1, pp. 142-150, 1988. https://doi.org/10.1109/28.87265
- J. S. Ko, J. H. Lee, and M. J. Youn, "Robust digital position control of brushless DC motor with adaptive load torque observer", IEE Electr. Power Appl., vol. 141, no. 2, pp. 63-70, 1994. https://doi.org/10.1049/ip-epa:19949858
- Y. D. Landau, Adaptive Control - The Model Reference Approach. Marcel Dekker, New York, 1979.