DOI QR코드

DOI QR Code

여파기 변환 기법을 이용한 이중대역 Gysel 전력 분배기

Dual-band Gysel Power Divider based on Filter Conversion Technique

  • 류재현 (금오공과대학교 전파통신과) ;
  • 김영 (금오공과대학교 전파통신과)
  • Yoo, Jae-Hyun (Department of Radio Communication Engineering, Kumoh National Institute of Technology) ;
  • Kim, Young (Department of Radio Communication Engineering, Kumoh National Institute of Technology)
  • 투고 : 2013.02.08
  • 심사 : 2013.02.28
  • 발행 : 2013.02.28

초록

본 논문은 대역저지 특성을 이용한 이중대역 Gysel 전력 분배기를 제안 하였다. 이것은 기존의 Gysel 전력 분배기를 집중소자를 이용한 단일 대역으로 설계한 후, 각 집중 소자들을 여파기 변환 기법을 이용하여 대역저지 특성을 갖도록 변환하여 이중대역 특성을 갖도록 설계하였다. 이러한 설계 방법의 특징은 분배기를 구성하고 있는 ${\lambda}/4$ 전송선로를 집중소자로 대체함으로써 억압된 고조파 특성을 얻을 수 있는 것과 크기를 작게 할 수 있다는 것이다. 이러한 방법의 타당성을 확인하기 위하여 880 MHz와 1650 MHz에서 동작하는 Gysel 분배기를 제작하여 정상적으로 두 주파수에서 동작하는 것을 확인하였다.

In this paper, we present the design and measured performances of an dual-band Gysel power divider based on band-stop characteristic. After the Gysel divider is designed by lumped elements at single operating frequency, and then using filter conversion technique the lumped elements were changed a band-stop characteristic with dual-band characteristics. The features of this design method are that ${\lambda}/4$ transmission line by replacing lumped elements suppressed harmonic characteristics and also can reduce the size. To validate of the proposed power divider, the divider has been designed and measured at 880 MHz and 1650 MHz dual frequencies. The measured performances of the Gysel divider agree with prediction results at two frequencies.

키워드

참고문헌

  1. H. Oraizi and A. R. Sharifi, "Design and Optimization of Broadband Asymmeterical Multisection Wilkinson Power Divider", IEEE Trans. Microwave Theroy Tech., vol. 54, No. 5. pp.2220-2231, May 2006.
  2. U. H. Gysel, ""A new N-way power divider/combiner suitable for high power application," IEEE MTT-S Int. Microw. Symp. Dig., vol. 75, pp. 116-118, May. 1975.
  3. E. Wilkinson, "An N-way hybrid power divider," IRE Trans Microwave Theory Tech, vol. 8, pp. 116-118, 1960. https://doi.org/10.1109/TMTT.1960.1124668
  4. F. Noriega and P.J. Gonzalez, "Designing LC Wilkinson Power splitters," RF interconnects/interfaces, pp. 18-24, 2004.
  5. Myun-Joo Park and Byungje Lee "A dual-band Gysel power divider with the even mode input extension stub lines," Microwave and Optical Tech. Lett., Vol. 53, No. 6, pp.1213-1216, June 2011. https://doi.org/10.1002/mop.25979
  6. M.-J. Park and B. Lee, "A dual-band Wilkinson power divider," IEEE Microwave Wireless Comp Lett., vol.18, pp. 85-87, 2008. https://doi.org/10.1109/LMWC.2007.915031
  7. T. Kawai, Y. Nakashima, Y. Kokubo and I. Ohta, "Lumped-Element Wilkinson Power Dividers Using LC-Ladder Circuits," Proc. of Int' Symp. on Radio Systems and Space Plasma, pp. 35-38, Sep. 2007.
  8. T. Kawai, Y. Kokubo, and I. Ohta, "A Design Method of Lumped-Element Wilkinson Power Dividers," Proc. of the 2007 IEICE society Conf., C-2-49, Sep. 2007.
  9. J.H. Yoo, and Y. Kim, "An Unequal Bual-band Lumped Element Power Divider," The Journal of Korea Navigation Institute, Vol 15-4, pp. 578-584, Aug. 2011.
  10. David M. Pozar, Microwave Engineering, 3rd ed., Wiley, pp. 450-458