Journal of Surface Science and Engineering (한국표면공학회지)

The Korean Institute of Surface Engineering (한국표면공학회)
권호 표지
DOI QR코드

DOI QR Code

Adhesion and Corrosion Resistance of Mg(OH)2 Films Prepared by Application Principle of Cathodic Protection in Natural Seawater

천연해수 중 음극방식 응용 원리에 의해 제작한 Mg(OH)2 코팅막의 밀착성 및 내식성

  • Lee, Seung-Hyo (Division of Marine Engineering, Korea Maritime University) ;
  • Kim, Hye-Min (Division of Marine Engineering, Korea Maritime University) ;
  • Lim, Kyung-Min (Division of Marine Engineering, Korea Maritime University) ;
  • Kim, Byung-Gu (Division of Marine Engineering, Korea Maritime University) ;
  • Lee, Myeong-Hoon (Division of Marine Engineering, Korea Maritime University)
  • 이승효 (한국해양대학교 기관공학부) ;
  • 김혜민 (한국해양대학교 기관공학부) ;
  • 임경민 (한국해양대학교 기관공학부) ;
  • 김병구 (한국해양대학교 기관공학부) ;
  • 이명훈 (한국해양대학교 기관공학부)
  • Received : 2013.02.07
  • Accepted : 2013.02.23
  • Published : 2013.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

Cathodic current on a metal tends to increase the $OH^-$ neighboring to the metal surface, especially during electro-deposition in seawater. The increased pH at metal/seawater interface results in precipitation of brucite crystal structure-$Mg(OH)_2$ as following formula; $Mg^{2+}+2OH^-{\rightarrow}Mg(OH)_2$, that is typical mechanism of the main calcareous deposits-compound in electro deposited coating films. In this study, the effects of anode and current density on deposition rate, composition structure and morphology of the deposited films were systematically investigated by scanning electron microscopy(SEM) and x-ray diffraction(XRD), respectively in order to overcome the problems such as deposition rate and a weak adhesion between deposit film and metal surface. The adhesion and corrosion resistance of the coating films were also evaluated by anodic polarization test. The electro-deposited film formed by using AZ31-Mg anode had the most appropriate physical properties. Weight gain of electro-deposit films increased with increasing cathodic current. Electro-deposit prepared at $5A/cm^2$ current density shows better adhesion than that formed at $8{\sim}10A/cm^2$.

Keywords

References

  1. D. F. Hassonand, C. R. Corwe, Materials for Marine System and Structures, Vol. 28, Academic Press, (1998).
  2. W. H. Hartt, C. H. Culberson, S. W. Smith, Corrosion, 40 (1984) 609. https://doi.org/10.5006/1.3581927
  3. K. E. Chave, E. Suess, Limnol. Oceano., 15 (1970) 633. https://doi.org/10.4319/lo.1970.15.4.0633
  4. Ch. Barchich, C. Deslouis, D. Festy, O. Gil, V. Maillot, S. Touzain, B. Tribollet, Electrochimica Acta, 48 (2003) 1645. https://doi.org/10.1016/S0013-4686(03)00075-6
  5. S-H. Lin, S. C. Dexter, Corrosion, 44(9) (1988) 615. https://doi.org/10.5006/1.3584974
  6. J. E. Finnegan, K. P. Fischer, "Calcareous Deposit : Calcium Magnesium Ion Concentration", Paper No. 581, Presented at Corrosion/89, April 17-21, Houston, (1989).
  7. H. J. Ryu, M. H. Lee, Electro-deposit Formed by Mesh-Electrodeposition Technology on Steel Plate in Seawater and Their Corrosion Resistance. (2000), 08.
  8. C. S. Lee, I. Y. Bae, K. J. Kim, K. M. Moon, M. H. Lee, J. Kor. Inst. Sur. Eng., 37 (2004) 253.
  9. M. H. Lee, Kor. Inst. Surf. Eng., (2012) 131.
  10. M. H. Lee, "Brucite-$Mg(OH)_2$ Films Formed by Electro-deposition Method in Nature Seawater", International Symposium on Biomimetic Materials Processing, (2012) 68.
  11. J. Kang, Y. S. Lee, K. M. Moon, M. H. Lee, "Formation of Brucite-$Mg(OH)_2$ Films by Electrodeposition Technique in Seawater and Their Corrosion Resistance and Adhesion Properties [Abstract]", The 2nd International Symposium on Hybrid Materials and Processing, (2011) 1648.

Cited by

  1. Formation of Environment Friendly Electrodeposition Films by CO2Gas Dissolved in Seawater and Their Corrosion Resistance vol.47, pp.1, 2014, https://doi.org/10.5695/JKISE.2014.47.1.039
  2. The Characteristic Analysis of Calcareous Deposit Films Formed on Steel Plate by Cathodic Current Process in Marine Environment vol.49, pp.2, 2016, https://doi.org/10.5695/JKISE.2016.49.2.166