Acknowledgement
Supported by : 서강대학교, 한국연구재단
References
- Moon C. and Kim N., 2012, "Analysis of Wire Drawing Process with Friction and Thermal Conditions obtained by Inverse Engineering," Journal of Mechanical Science and Technology, Vol. 26, pp. 2903-2911. https://doi.org/10.1007/s12206-012-0711-1
- Moon C. and Kim N., 2012, "Study on Dimensional Change in Wire Product during Wire Drawing Process," Trans. of the Korean Society of Mechanical Engineers, Vol. 36, pp. 723-730. https://doi.org/10.3795/KSME-A.2012.36.7.723
- Mutrux, A., Berisha, B., Hochholdinger, B. and Hora, P., 2008, "Numerical Modelling of Cross Roll Straightening," LS-DYNA Anwenderforum.
- Mutrux, A., Berisha, B. and Hora, P., 2010, "FE Simulation of Cross Roll Straightening: a Strain Tensor Field Approach," American Institude of Physics, Vol. 1252, pp. 941 -948.
- Mutrux, A., Berisha, B., Hora, P., 2011, "Prediction of Cyclic Softening in a Medium Carbon Steel During Cross Roll Straightening," Journal of Materials Processing Technology, Vol. 211, pp. 1448 - 1456. https://doi.org/10.1016/j.jmatprotec.2011.03.019
- Kim, Y., Lee, S. W., Han, D. S. and Han, G. J., 2007, "The Influence on the Bar Straightness and Plastic Deformation the Roll intersection angle of a Two Roll Straightener," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 6, pp. 76-80.
- Talukder, N. K. D., Singh, A.N. and Johnson, W., 1990, "Cross-Roll Straighteners and their Performance," Journal of Materials Processing Technology, Vol. 21, pp. 101 - 109. https://doi.org/10.1016/0924-0136(90)90033-Q
- Wu, B. J., Chanb, L. C., Leeb, T.C. and Ao, L. W., 2000, "A Study on the Precision Modeling of the Bars Produced in Two Cross-Roll Straightening," Journal of Materials Processing Technology, Vol. 99, pp. 202 - 206. https://doi.org/10.1016/S0924-0136(99)00421-5
- Nastran, M. and Kuzman, K., 2002, "Stabilisation of Mechanical Properties of the Wire by Roller Straightening," Journal of Materials Processing Technology, Vol. 125-126, pp. 711 - 719. https://doi.org/10.1016/S0924-0136(02)00316-3
- Wang, M. T., Li, X. T. and Du, F. S., 2009, "Analysis of Metal Forming in Two-Roll Cress Wedge Rolling Process Using Finite Element Method." Journal of Iron and Steel Research, International, Vol. 16, pp. 38 - 43. https://doi.org/10.1016/S1006-706X(09)60008-X
- Srimani, S. L., Pankaj, A. C. and Basu, J., 2005, "Analysis of End Straightness of Rail During Manufacturing," International Journal of Mechanical Science, Vol. 47, pp. 1874-1884. https://doi.org/10.1016/j.ijmecsci.2005.07.005
- Kim, W. K., Sin, H. G., Kim, B. H. and Kim, H. Y., 2007, "Straightening of Micro Wires Using the Direct Wire Heating and Pulling Method," International Journal of Machine Tools & Manufacture, Vol. 47, pp. 1046 - 1052. https://doi.org/10.1016/j.ijmachtools.2006.10.002
- Balica, J. and Nastran, M., 2002, "An on-line Predictive System for Steel Wire Straightening Using Genetic Programming," Engineering Applications of Artificial Intelligence, Vol. 15, pp. 559 -565. https://doi.org/10.1016/S0952-1976(03)00021-6
- Yamashita, T. and Yoshida, K., 2005, "Tensile Straightening of Superfine Wire and Residual Stress Measurement Using Focused Ion Beam," The Japan Society of Mechanical Engineer, Vol. 48, pp. 322 -328.
- Lu, H., Zhang, X., Leopold, J., Ling, H. and Changqiao Guo, 2008, "Straightening Model and Prediction of Straightening Stroke of Precision Linear Guide Rail," In Proceedings of ICIRA(2), pp. 321 -328.
- Dvorkin, E. N. and Medina, F. M., 1991, "Finite Element Models for Analyzing the Straightening of Steel Seamless Tubes," Trans. American Society of Mechanical Engineer, Vol. 133, pp. 224 - 232.
Cited by
- Theoretical analysis and numerical simulation on the process mechanism of two-roller straightening pp.1433-3015, 2018, https://doi.org/10.1007/s00170-017-1120-5