DOI QR코드

DOI QR Code

Characteristic Studies of Plasma Treated unidirectional Hildegardia Populifolia Fabric

  • Prasad, C. Venkata (Advanced Composite Materials Laboratory, Dept. of Mechanical Engineering, Changwon National University) ;
  • Lee, D.W. (Advanced Composite Materials Laboratory, Dept. of Mechanical Engineering, Changwon National University) ;
  • Sudhakara, P. (Advanced Composite Materials Laboratory, Dept. of Mechanical Engineering, Changwon National University) ;
  • Jagadeesh, D. (Advanced Composite Materials Laboratory, Dept. of Mechanical Engineering, Changwon National University) ;
  • Kim, B.S. (Composites Materials Group, Materials Processing Division, Korea Institute of Materials Science) ;
  • Bae, S.I. (Advanced Composite Materials Laboratory, Dept. of Mechanical Engineering, Changwon National University) ;
  • Song, J.I. (Advanced Composite Materials Laboratory, Dept. of Mechanical Engineering, Changwon National University)
  • Received : 2012.12.03
  • Accepted : 2013.02.15
  • Published : 2013.02.28

Abstract

This study deals with effect of plasma treatment on the properties of unidirectional ligno cellulosic fabric Hildegardia Populofolia (HDP) fabric. Thermal stability of the fabric was determined by differential scanning calorimetry (DSC) and Thermo gravimetric analysis (DSC). Morphological properties was analyzed by SEM analysis and found that the surface was rough upon plasma treatment which provides good interfacial adhesion with matrix during composite fabrication. Thermal stability and mechanical properties of the plasma treated fabric slightly increases compare to alkali and untreated fabric. It was observed that tensile properties of the fabric increases upon plasma treatment due to the formation of rough surface. SEM analysis indicates formation of rough surface on plasma treatment which helps in increasing the interfacial interaction between the matrix (hydrophobic) and fabric (hydrophilic).

Keywords

References

  1. Ahmedullah, M., Nayar, M.P., and Sastry, A.R.K., Hildegardia populifolia, Red Data Book of Indian Plants, Botanical Survey of India, Calcutta. Vol. 3, 1990, pp. 251-253.
  2. Alexandre, G., Takanori, M., Koichi, G., and Junji, O., "Development and effect of alkali treatment on tensile properties of curaua fiber green composites," Composite Part A: Applied Science and Manufacturing, Vol. 38, No. 8, 2007, pp. 1811-1820. https://doi.org/10.1016/j.compositesa.2007.04.010
  3. Venkata, R.G., Khanam, P.N., Sobha, R.T., Chowdoji, R.K., Naidu, S.V., Bulletin of Pure and Applied Science, 26C (1), 2007, pp. 17-24.
  4. Tserkia, V., Zafeiropoulosb, N.E., Simonb, F., and Panayiotoua, C., "A study of the effect of acetylation and propionylation surface treatments on natural fibres," Composite Part A: Applied Science Manufacturing, Vol. 36, No. 8, 2005, pp. 1110-1118. https://doi.org/10.1016/j.compositesa.2005.01.004
  5. Marianne, T., Sedan, D., Peyratout, C., Bonnet, J.P., Smith, A., Guinebretiere, R., Gloaguen, V., and Krausz, P., "Influence of various chemical treatments on the composition and structure of hemp fibres," Composite Part A: Applied Science Manufacturing, Vol. 39, No. 3, 2008, pp. 514-522. https://doi.org/10.1016/j.compositesa.2007.12.001
  6. Venkata, R.G., Venkata, P.C., Chowdoji, R.K., Sobha, R.T., and Subha, M.C.S., "Tensile and lignocellulosic properties of Prosopis chilensis natural fabric," Journal of Applied Polymer Science, Vol. 117, No. 5, 2010, pp. 2907-2914.
  7. Li, Z.F., Netravali, A.N., "Surface modification of UHSPE fibers through allylamine plasma deposition. I. Infrared and ESCA study of allylamine plasma formed polymers," Journal of Applied Polymer Science, Vol. 44, No. 2, 1992, pp. 319-331. https://doi.org/10.1002/app.1992.070440216
  8. Shenton, M.J., Lovell-Hoare, M.C., and Stevens, G.C., "Adhesion enhancement of polymer surfaces by atmospheric plasma treatment," Journal of Physics D: Applied Physics, Vol. 34, No. 18, 2001, 2754-2760. https://doi.org/10.1088/0022-3727/34/18/307
  9. Bledzki, A.K., Reihmane, S., and Gassan, P.J., "Modification methods for vegetable fibres for natural fibre composites," Journal of Applied Polymer Science, Vol. 59, 1996, 1329-1336. https://doi.org/10.1002/(SICI)1097-4628(19960222)59:8<1329::AID-APP17>3.0.CO;2-0
  10. Yuan, X., Jayaraman, K., Bhattacharyya D., "Effects of plasma treatment in enhancing the performance of wood fibre-polypropylene composites," Composite Part A, Vol. 35, No. 12, 2004, 1363-1374. https://doi.org/10.1016/j.compositesa.2004.06.023
  11. Yuan, X., Jayaraman, K., and Bhattacharyya, D., "Mechanical properties of plasma-treated sisal fibre-reinforced polypropylene composites," Journal of Adhesive Science Technology, Vol. 18, No. 9, 2004, pp.1027-1045. https://doi.org/10.1163/1568561041257478
  12. Venkata P.C., Chowdoji, R.K., Venkata, R.G., Sobha, R.T., Swamy, B.Y., and Subha, M.C.S., "Characteristic Studies of Ligno-Cellulosic Fabric Grewia tenax," Journal of Natural fibers, Vol. 7, No. 3, 2010, pp. 194-215. https://doi.org/10.1080/15440478.2010.504048
  13. Cao, K.G., "Research and development of fully green composites reinforced with natural fibers," Journal of Solid Mechanics and Material Engineering, Vol. 1, No. 9, 2007, pp. 1073-1084. https://doi.org/10.1299/jmmp.1.1073
  14. Ray, D., Sarkar, B.K., "Characterization of alkali-treated jute fibers for physical and mechanical properties," Journal of Applied Polymer Science, Vol. 80, No. 7, 2001, pp. 1013-1020. https://doi.org/10.1002/app.1184
  15. Rajulu, A.V., Rao, G.B., Rao, B.R.P., A. Reddy, "Properties of ligno-cellulose fiber Hildegardia," Journal of Applied Polymer Science, Vol. 84, No. 2, 2001, pp. 2216-2221.
  16. Baltazar-y-Jimenez, A., Bistritz, M., Schulz, E., "Atmospheric air pressure plasma treatment of lignocellulosic fibres: Impact on mechanical properties and adhesion to cellulose acetate butyrate," Composite Science and Technology, Vol. 68, No. 1, 2008, pp. 215-227. https://doi.org/10.1016/j.compscitech.2007.04.028
  17. Rajulu, A.V., Rao, G.B., Devi, L.G., "Tensile properties of Natural fabric Hildegardia populifolia/polycarbonate toughened epoxy composites," Polymer Composite, Vol. 25, No. 6, 2004, pp. 563-568. https://doi.org/10.1002/pc.20050

Cited by

  1. Bio-film Composites Composed of Soy Protein Isolate and Silk Fiber: Effect of Concentration of Silk Fiber on Mechanical and Thermal Properties vol.27, pp.5, 2014, https://doi.org/10.7234/composres.2014.27.5.196
  2. 해초 나노섬유가 황마섬유 강화 복합재료의 기계적 물성에 미치는 영향 vol.31, pp.6, 2013, https://doi.org/10.7234/composres.2018.31.6.398