References
- Atlas Copco, 2006, Surface Drilling in Quarry and Construction.
- Bu, C., Qu, Y., Cheng, Z., Liu, B., 2009, Numerical simulation of impact on pneumatic DTH hammer percussive drilling, Journal of Earth Science, 20.5, 868-878. https://doi.org/10.1007/s12583-009-0073-5
- Century Dynamics Inc., 2003, AUTODYN Theory Manual, Concord, California, USA.
- Cho, J.-W., Jeon, S., Yu, S.-H., and Chang, S.-H., 2010, Optimum spacing of TBM disc cutters: A numerical simulation using the three-dimensional dynamic fracturing method, Tunnelling and Underground Space Technology, Vol. 25, No. 3, 230-244. https://doi.org/10.1016/j.tust.2009.11.007
- Choi, M. J., Cho, S. H., Yang, H. S., 2008, A Study on dynamic Fracturing Behavior of Anisotropic Granite by SHPB Test, Tunnel & Underground Space, Vol. 18, No. 3, 241-218.
- Hustruid, W.A. and Fairhurst, C., 1971(a), A theoretical and experimental study of the percussive drilling of rock, Part I - Theory of percussive drilling, Int. J. Rock Mech. Min. Sci. Vol. 8, 311-333. https://doi.org/10.1016/0148-9062(71)90045-3
- Hustruid, W.A. and Fairhurst, C., 1971(b), A theoretical and experimental study of the percussive drilling of rock, PART II - Force-penetration and specific energy determinations, Int. J. Rock Mech. Min. Sci. Vol. 8, 335-356. https://doi.org/10.1016/0148-9062(71)90046-5
- Hustruid, W.A. and Fairhurst, C., 1972(a), A theoretical and experimental study of the percussive drilling of rock, PART III - Experimental verification of the mathematical theory, Int. J. Rock Mech. Min. Sci. Vol. 9, 417-429. https://doi.org/10.1016/0148-9062(72)90006-X
- Hustruid, W.A. and Fairhurst, C., 1972(b) A theoretical and experimental study of the percussive drilling of rock, PART IV - Application of the model to actual percussion drilling, Int. J. Rock Mech. Min. Sci. Vol. 9, 431-449. https://doi.org/10.1016/0148-9062(72)90007-1
- Jeong, H. Y., Jeon, S. W., Cho, J. W., 2012, A Study on Punch Penetration Test for Performance Estimation of Tunnel Boring Machine, Tunnel & Underground Space, Vol. 22, No. 2, 144-156. https://doi.org/10.7474/TUS.2012.22.2.144
- Kim, K. Y., Kim, C. Y., Kim, K.-S., 2008, Assessment of Hydraulic Drilling Data on Homogeneous Rock Mass, Tunnel & Underground Space, Vol. 18, No. 6, 480-490
- LDI Ltd, 2012, 3D Laser Scanner catalog: RPS LASER PROBES (on website).
- Oh, J. Y., Lee, G. H., Song, C. S., 2011, A Study on the Analysis of Hydraulic Circuit of a Rockdrill Drifter, The Korea Fluid Power System Society, Proceeding of the KFPS 2011 Spring Conference, 70-75.
- Shin, D. Y., Song, C. H., 2012, Performance Optimization of Down-the-Hole Hammer Using Taguchi Method, Journal of the Korean Society of Mechanical Engineers-A, Vol. 36, No. 1, 109-116. https://doi.org/10.3795/KSME-A.2012.36.1.109
- Song, C. H., Kwon, K. B., Park, J. Y., Shin, D. Y., Cho, J. W., 2012, Optimization of Flow Path of Drill Bit Using CFD Simulation, Tunnel & Underground Space, Vol. 22, No. 4, 257-265. https://doi.org/10.7474/TUS.2012.22.4.257
- Yang, J. H., Ahn, J. L., Kim, S. K., Song, Y. S., Sung, N. H., Lee, Y. K., Cho, S. H., 2011, Estimation of Dynamic Brazilian Tensile Strengths of Rocks Using Split Hopkinson Pressure Bar (SHPB) System, Tunnel & Underground Space, Vol. 21, No.2, 109-116
Cited by
- Trend Analysis of Drilling Technology for Top-Hammer Drilling Machine vol.23, pp.4, 2013, https://doi.org/10.7474/TUS.2013.23.4.271
- Evaluation of drilling efficiency by percussion testing of a drill bit with new button arrangement vol.15, pp.6, 2014, https://doi.org/10.1007/s12541-014-0437-3
- Development of lab-scale rock drill apparatus for testing performance of a drill bit vol.16, pp.7, 2015, https://doi.org/10.1007/s12541-015-0185-z
- Optimum operating conditions of a multi-hammer drilling machine assessed using a linear percussion test vol.16, pp.7, 2015, https://doi.org/10.1007/s12541-015-0186-y
- Evaluation of a Drill Bit Button Arrangement for Enhanced Drilling Efficiency vol.39, pp.6, 2015, https://doi.org/10.3795/KSME-A.2015.39.6.575
- Optimal button arrangement of a percussion drill bit and its operating condition for improving drilling efficiency pp.2041-2983, 2018, https://doi.org/10.1177/0954406217726563