DOI QR코드

DOI QR Code

Numerical simulation of elastic-plastic stress concentration in fibrous composites

  • Polatov, Askhad M. (Department of Mechanics and Mathematics, National University of Uzbekistan)
  • 투고 : 2013.12.17
  • 심사 : 2013.12.20
  • 발행 : 2013.09.25

초록

In the present study an elastic-plastic strain analysis is carried out for fibrous composites by using numerical modeling. Application of homogeneous transversely-isotropic model was chosen based on problem solution of a square plate with a circular hole under uniaxial tension. The results obtained in this study correspond to the solution of fiber model trial problem, as well as to analytical solution. Further, numerical algorithm and software has been developed, based on simplified theory of small elastic strains for transversely-isotropic bodies, and FEM. The influence of holes and cracks on stress state of complicated configuration transversely-isotropic bodies has been studied. Strain curves and plasticity zones that are formed in vicinity of the concentrators has been provided. Numerical values of effective mechanical parameters calculated for unidirectional composites at different ratios of fiber volume content and matrix. Content volume proportions of fibers and matrix defined for fibrous composite material that enables to behave as elastic-plastic body or as a brittle material. The influences of the fibrous structure on stress concentration in vicinity of holes on boron/aluminum D16, used as an example.

키워드

참고문헌

  1. Aktas, A. (2005), "Elastic-plastic stress analysis and plastic region expansion of transversely distributed loaded aluminum metal-matrix-laminated plates with a square hole", J. Reinf. Plast. Comp., 24(6), 597-608. https://doi.org/10.1177/0731684405045020
  2. Harkegard, G. and Mann, T. (2003), "Neuber prediction of elastic-plastic strain concentration in notched tensile specimens under large-scale yielding", J. Strain Anal. Eng., 38(1), 79-94. https://doi.org/10.1243/030932403762671917
  3. Kamaya, M. (2006), "Stress intensity factors of surface crack with undulated front", JSME Int. J. A-Solid. M., 49(4), 529-535. https://doi.org/10.1299/jsmea.49.529
  4. Kaminsky, M.M. (2007), Computational mechanics of composite materials, Springer.
  5. Karpov, E.B. (2002), "Stress concentration and fracture near a circular hole in composite elements of constructions", Ph.D. Dissertation, Novosibirsk State University, Russia.
  6. Khaldjigitov, A. (2002), "Numerical aspects of strain-space plasticity problems", Proceedings of the International Congress of Mathematicians, Beijing, August.
  7. Khaldjigitov, A. (2003), "Plasticity theories for transversely isotropic materials", Proceedings of COMPLAS VII 7th International Conference on Computational Plasticity, Barcelona, April.
  8. Khaldjigitov, A. and Adambaev U.I. (2004), "Numerical and mathematical modeling of elastic plastic transversally isotropic materials", Proceedings of the 11th European Conference of Composite materials, Rhodes, May-June.
  9. Korobeynikov, S.N. and Babichev, A.V. (2007), "Numerical simulation of dynamic deformation and buckling of nanostructures", Proceedings of ICF (International Congress of Fracture) Interquadrennial conference, Moscow, July.
  10. Lee, J., Lee, M.G., Barlat, F. and Kim, J.H. (2012), "Stress integration schemes for novel homogeneous anisotropic hardening model", Comput. Method. Appl. M., 247-248, 73-92. https://doi.org/10.1016/j.cma.2012.07.013
  11. Livieri, P. and Nicoletto, G. (2003), "Elasto-plastic strain concentration factors in finite thickness plates", J. Strain Anal. Eng., 38(1), 31-36. https://doi.org/10.1243/030932403762671863
  12. Nagaraj, K.A., Knudsen, E.C., Wells, D., McGill, P. and Swanson, G.R. (2008), "Determination of mixed-mode stress intensity factors, fracture toughness, and crack turning angle for anisotropic foam material", Int. J. Solids Struct., 45(18-19), 4936-4951. https://doi.org/10.1016/j.ijsolstr.2008.04.028
  13. Neuber, H. (1946), Theory of notch stresses, Edwards, London.
  14. Okumus, F. (2011), "Elasto-plastic stress analysis in silicon carbide fiber reinforced magnesium metal matrix composite with a square hole", Math. Comput. Appl., 16(1), 216-225.
  15. Pobedrya, B.E. (1984), Mechanics of composite materials, Springer.
  16. Rodriguez-Ramos, R., Yan, P., Lopez-Realpozo Juan, C., Guinovart-Diaz, R., Bravo-Castillero, J., Sebastian, G., Noureddine, A. and Haisam, O. (2005), "The transmission loss of curved laminates and sandwich composite panels", J. Acoust. Soc. Am., 118(2), 774-790. https://doi.org/10.1121/1.1932212
  17. Sayman, O., Akbulut, H. and Meric, C. (2000) "Elasto-plastic stress analysis of aluminum metal matrix composite laminated plates under in-plane loading", Comput. Struct., 75(1), 55-63. https://doi.org/10.1016/S0045-7949(99)00086-3
  18. Tlilan, H.M., Yousuke, S. and Tamotsu, M. (2005), "Effect of notch depth on strain-concentration factor of notched cylindrical bars under static tension", Eur. J. Mech. A-Solid., 24(3), 406-416 https://doi.org/10.1016/j.euromechsol.2005.02.001
  19. Van Der Meer, F.P. and Sluys, L.J. (2009), "Continuum models for the analysis of progressive failure in composite laminates", J. Comp. Mater., 43, 2131-2156. https://doi.org/10.1177/0021998309343054
  20. Zeng, Z. and Fatemi, A. (2001), "Elastic-plastic stress and strain behavior at notch roots under monotonic and cyclic loading", J. Strain Anal. Eng., 36(3), 287-300. https://doi.org/10.1243/0309324011514476

피인용 문헌

  1. Elastic-plastic formulation for concrete encased sections interaction diagram tracing vol.19, pp.4, 2015, https://doi.org/10.12989/scs.2015.19.4.861
  2. Algorithm of solving the problem of small elastoplastic deformation of fiber composites by FEM vol.5, pp.3, 2020, https://doi.org/10.12989/acd.2020.5.3.305