Journal of Power Electronics

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

Novel Zero-Voltage-Switching Bridgeless PFC Converter

  • Haghi, Rasool (Department of Electrical Engineering, Sharif University of Technology) ;
  • Zolghadri, Mohammad Reza (Department of Electrical Engineering, Sharif University of Technology) ;
  • Beiranvand, Reza (Department of Electrical and Computer Engineering, Tarbiat Modares University)
  • Received : 2012.05.05
  • Published : 2013.01.20
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, a new zero-voltage-switching, high power-factor, bridgeless rectifier is introduced. In this topology, an auxiliary circuit provides soft switching for all of the power semiconductor devices. Thus the switching losses are reduced and the highest efficiency can be achieved. The proposed converter has been analyzed and a design procedure has been introduced. The control circuit for the converter has also been developed. Based on the given approach, a 250 W, 400 Vdc prototype converters has been designed at 100 kHz for universal input voltage (90-264 Vrms) applications. A maximum efficiency of 94.6% and a power factor correction over 0.99 has been achieved. The simulation and experimental results confirm the design procedure and highlight the advantages of the proposed topology.

Keywords

References

  1. C. M. Wang, "A novel zero-voltage-switching PWM boost rectifier with high power factor and low conduction losses," IEEE Trans. Ind. Electron., Vol. 52, No. 2, pp. 427-435, Apr. 2005.
  2. M. Kazerani, P. D. Ziogas, and G. Joos, "A novel active current wave shaping technique for solid-state input power factor conditioners," IEEE Trans. Ind. Electron., Vol. 38, No. 1, pp. 72-78, Feb. 1991. https://doi.org/10.1109/41.103488
  3. A. R. Prasad, P. D. Ziogas, and S. Manias, "An active power correction technique for three-phase diode rectifiers," IEEE Trans. Power Electron., Vol. 6, No. 1, pp. 83-92, Jan. 1991. https://doi.org/10.1109/63.65006
  4. H.-L. Do, "Zero-Voltage-Switching Boost Converter Using a Coupled Inductor," Journal of Power Electronics, Vol. 11, No.1, pp. 16-20, Jan 2011. https://doi.org/10.6113/JPE.2011.11.1.016
  5. M. Mahdavi and H. Farzanehfard, "Zero-currenttransition bridgeless PFC without extra voltage and current stress," IEEE Trans. Ind. Electron., Vol. 56, No. 7, pp. 2540-2547, Jul. 2009. https://doi.org/10.1109/TIE.2009.2020078
  6. B. Feng and D. Xu, "1-kW PFC converter with compound active-clamping," IEEE Trans. power Electron., Vol. 20, No. 2, pp. 324-330, Mar. 2005. https://doi.org/10.1109/TPEL.2004.843005
  7. J. Yungtaek and M. M. Jovanovic, "A bridgeless PFC boost rectifier with optimized magnetic utilization," IEEE Trans. Power Electron., Vol. 24, No. 1, pp. 85-93, Jan. 2009. https://doi.org/10.1109/TPEL.2008.2006054
  8. H. Y. Tsai, T. H. Hsia, D. Chen "A family of zero-voltagetransition bridgeless power-factor-correction circuits with a zero-current-switching auxiliary switch," IEEE Trans. Ind. Electron., Vol. 58, No. 5, pp. 1848-1855, May 2011. https://doi.org/10.1109/TIE.2010.2053335
  9. E. H. Ismail, "Bridgeless SEPIC rectifier with unity power factor and reduced conduction losses," IEEE Trans. Ind. Electron., Vol. 56, No. 4, pp. 1147-1157, Apr. 2009. https://doi.org/10.1109/TIE.2008.2007552
  10. J.-H. Kim, D.-Y. Jung, S.-H. Park, C.-Y. Won, Y.-C. Jung, and S.-W. Lee, "High efficiency soft-switching boost converter using a single switch," Journal of Power Electroncs, Vol. 9, No. 6, pp. 929-939, Dec. 2009.
  11. S. K. Kwon, K. F.A.Sayed, "Boost-half bridge single power stage PWM DC-DC converters for PEM-fuel cell stacks," Journal of Power Electronics, Vol. 8, No. 3, pp. 239-247, Jul. 2008.
  12. B. Su, J. Zhang, and Z. Lu "Totem-pole boost bridgeless pfc rectifier with simple zero-current detection and full-range zvs operating at the boundary of dcm/ccm," IEEE Trans. power. Electron., Vol. 26, No. 2, pp. 427-435, Feb. 2011. https://doi.org/10.1109/TPEL.2010.2059046
  13. C. A. Canesin and I. Barbi, "A novel single-phase zcs-pwm high-power-factor boost rectifier," IEEE Trans. power. Electron, Vol. 14, No. 4, pp. 629-635. Jul. 1999. https://doi.org/10.1109/63.774199
  14. R. Beiranvand, B. Rashidian, M. Zolghadri, and S. M. Alavi, "Design and implement of the PFC Stage of the Ion Implanter's Filament and Arc Power Supplies," ICEE 2009, Vol. 3, pp. 25-32, 2009.
  15. "Application Note AN4121, Design of Power Factor Correction Circuit Using FAN7527B," 2002 Fairchild Semiconductor Corporation.
  16. C. Adriana, AN1792 application note, "Design of fixed-off-time controlled PFC pre-regulator with the L6562," STMicroelectronics, 2003.
  17. C. Adragna, "AN1059 application note design equations of high PF. Flyback converters based on the L6561," STMicroelectronics, 2000.
  18. J. Yang; X. Wu, J. Zhang, and Z. Qian, "Design considerations of a high efficiency ZVS buck AC-DC converter with constant on-time control," IEEE Proc. Telecommunications Energy Conference (INTELEC) 2010, 32nd International, pp.1-5, 2010.
  19. L. Huber, B. T. Irving, and M. M. Jovanovic, "Effect of valley switching and switching-frequency limitation on line-current distortions of DCM/CCM boundary boost PFC converters," IEEE Trans. Power Electron., Vol. 24, No. 2, pp. 339-347, Feb. 2009. https://doi.org/10.1109/TPEL.2008.2006053