2차원 영상 정보를 이용한 3차원 위치 측정 알고리즘 개발

Development of a 3-D Position Measurement Algorithm using 2-D Image Information

  • Lee, J.H. (Department of LCD Semiconductor System Engineering Korea Polytechnic I. Jungsu Campus) ;
  • Jung, S.H. (Department of LCD Semiconductor System Engineering Korea Polytechnic I. Jungsu Campus) ;
  • Kim, D.H. (Shinhan Industrial Co., Ltd.)
  • 발행 : 2013.10.31

초록

There are several problems in the conventional 2-D image processing and 3-D measurement systems. In the case of the 2-D image processing system, it is not possible to detect elevation data. In a 3-D measurement system, it requires a skillful operator and a lot of time for measuring data. Also, there exist data errors depending on operators. The limitation of detecting elevation data in the 2-D image processing system can be solved by laser diodes. In this study an algorithm that measures the accurate data in a subject face to be detected by combining laser diodes and a commercial CCD camera is developed. In the development process, a planar equation is developed using laser diodes and the equation is used to obtain a normal vector. Based on the results, an algorithm that transforms commercial CCD camera coordinates to 3-D coordinates is proposed. The completed measurement method will be applied to replace a manual measurement system for vehicle bodies and parts by an automated system.

키워드

참고문헌

  1. Lee, J. H., "3-D Inspection of the Object Using Robot Vision and Laser Beam," Proceedings of the Society of Korea Machinery, pp. 63, 2011.
  2. Jihong, Chen., Daoshan Yang., and Huicheng Zhou.,"Avoiding Spurious Reflections form Shiny Surfaces On a 3-D Real-Time Machine Vision Inspection System," IMTC/98. Conference Proceedings. IEEE, pp.364-368, 1998.
  3. Kim, D. H.,"CCD camera and the laser beam is measured using three-dimensional information of an object," Ulsan University, Master of Science Thesis, 2004.
  4. Sang, D. M.,"A Self Calibration Technique for Active Vision Systems," Robotics and Automation, IEEE, Transactions on, pp.114-120,1996.
  5. Ohta. R., "Results of R&D on catheter type micromachine," Micro mechatronics and Human Science, pp. 5-12. 2001.
  6. Kim, D. G., Chang, W. S.,"A Study on a 3-D Profile Meter Using Dynamic Shape Reconstruction with Adaptive Pattern Clustering of the Line Shaped Laser Light," Proceedings of the IEEE Region 10 Conference, pp.1371-1374, 1999.
  7. Lee, J. H., and Lee, B. H., "A Study on the Camera Calibration Method Using Line Correspondence," The Transactions of the Korean Institute of Electrical Engineers. Vol. 40, No.11, 1991.
  8. Lee, J. H., "Determination of Camera System Orientation and Translation in Cartesian coordinates," Transactions of the Korean Society of Machine Tool Engineering. pp.109-114, 2003.