DOI QR코드

DOI QR Code

A Statistical Analysis Method for Image Processing Errors in the Position Alignment of BGA-type Semiconductor Packages

BGA형 반도체 패키지의 위치정렬용 영상처리기법 오차의 통계적 분석 방법

  • Kim, Hak-Man (Department of Mechatronics Engineering, Korea University of Technology & Education) ;
  • Seong, Sang Man (Department of Mechatronics Engineering, Korea University of Technology & Education) ;
  • Kang, Kiho (Department of Mechatronics Engineering, Korea University of Technology & Education)
  • 김학만 (한국기술교육대학교 대학원 메카트로닉스공학과) ;
  • 성상만 (한국기술교육대학교 메카트로닉스공학부) ;
  • 강기호 (한국기술교육대학교 메카트로닉스공학부)
  • Received : 2013.08.20
  • Accepted : 2013.10.04
  • Published : 2013.11.01

Abstract

Pick and placement systems need high speeds and reliability for the position alignment process of semiconductor packages in picking up and placing them on placement trays. Image processing is usually adopted for position aligning where finding out the most suitable method is considered most important aspect of the process. This paper proposes a method for judging the performance of different image processing algorithms based on the PCI (Process Capability Index). The PCI is an index which represents the error distribution acquired from many experimental data. The bigger the index, the more reliable the results or the lower the deviation. Two compared and candidate methods are Hough Transform and PCA (Principal Component Analysis), both of which are very suitable for oblong or rectangular type packages such as BGA's. Comparing the two approaches through a CPI with enough experimental results leads to the conclusion that the PCA is much better than the Hough Transform in not only reliability, but also processing speed.

Keywords

References

  1. R. D. Duda and P. E. Hart, "Use of the Hough transform to detect lines and curves in pictures" Comm. ACM, vol. 15, no. 1, pp. 11-15, 1972. https://doi.org/10.1145/361237.361242
  2. D. H. Ballard "Generalizing the Hough transform to detect arbitrary shapes," Pattern Recognition, vol. 13, no. 2, pp. 111-122, 1981. https://doi.org/10.1016/0031-3203(81)90009-1
  3. P. V. C. Hough, "Method and means for recognizing complex patterns," U.S. Patent Pat. no. 3069654, 1962.
  4. R. C. Gonzalez and R. E. Woods, "Digital image processing," Y.-H. Ha, J.-K. Im, C. Y. Nam, Y. S. Kim, et al. Green Press (in Korean), 1998.
  5. D.-J. Kang and J.-E. Ha, Digital Image Processing using Visual C++ (in Korean), SciTech Media, 2003.
  6. L. I. Smith, "A tutorial on Principal Components Analysis," Feb. 2002.
  7. L. G. Shapiro and George C. Stockman, Computer Vision, Prentice Hall, 2001.
  8. K. Y. Kim and M. S. Jun, "SAS principal componenet analysis," Korea Univ. Statistics Institute Lecture Series in Statistics Analysis (in Korean), 7, 1989.
  9. K. C. Koh, K. W. Ko, J. H. Kim, H. J. Choi, and J. S. Kim, "An automatic inspection of SMT rectangular chips based on PCA algorithm," Journal of Korean Precision Engineering (in Korean), vol. 20, no. 11, pp. 23-31, 2003.
  10. D. J. Kang and T. J. Roh, "Development of an edge-based point correlation algorithm for fast and stable visual inspection system," Journal of Control, Automation, and Systems Engineering (in Korean), vol. 9, no. 8, pp. 640-646, 2003. https://doi.org/10.5302/J.ICROS.2003.9.8.640
  11. J.-D. Kim, Regression Analysis, Sejong Press (in Korean), 1999.
  12. S. W. Chung and M. H. Lee, Visual C++ Digital Image Process using Open Source CxImage, Hongneung Science Press (in Korean), pp. 457-511, 2006.
  13. New & Complete Practice of Minitab, Irie Tech (in Korean), pp. 322-366, 2005.

Cited by

  1. Inspection method of BGA Ball Using 5-step Ring Illumination vol.21, pp.12, 2015, https://doi.org/10.5302/J.ICROS.2015.15.0162
  2. APC Technique and Fault Detection and Classification System in Semiconductor Manufacturing Process vol.21, pp.9, 2015, https://doi.org/10.5302/J.ICROS.2015.15.0095