References
- Kwon, T.H., Joo, J.W. and Kim, S.J., 1994, "Kinematics and Deformation Characteristics as a Mixing Measure in the Screw Extrusion Process," Polym. Eng. Sci., Vol. 34(3), pp.174. https://doi.org/10.1002/pen.760340303
- Kim, S.J. and Kwon, T.H., 1994, "Deformation Measure in Three-Dimensional Duct Flows" Korean Journal of Rheology, Vol. 6(1), pp.60.
- Kim, S.J. and Kwon, T.H., 1996, "Measures of Mixing for Extrusion by Averaging Concepts", Polym. Eng. Sci., Vol. 36(11), pp.1466 . https://doi.org/10.1002/pen.10541
- Kim, S.J. and Kwon, T.H., 1996, "Accurate Determination of a Deformation Measure in the Screw Extrusion Process" Polym. Eng. Sci., Vol. 36(11), pp.1454. https://doi.org/10.1002/pen.10540
- Rauwendaall, C., 1994, "Polymer Extrusion" Hanser, NY.
- Liu, T. J., Hong, C. N., Chen, K. C., 1988, "Computer-aided analysis of a linearly tapered coat-hanger die" Polymer engineering and science Vol. 28(23), pp. 1517. https://doi.org/10.1002/pen.760282302
- Hurez, P., Tanguy, P. A., Blouin, D., 1993, "Numerical simulation of profile extrusion dies without flow separation" Polymer engineering and science Vol. 33(15), pp. 971. https://doi.org/10.1002/pen.760331506
- Mueller, C.D., Kerns, J., Ebeling, T., Nazarenko, S., Hiltner, A., Baer, E., 1997. "Microlayer Coextrusion: Processing and Applications" Polym. Proc. Eng., Vol. 9, pp. 137-157.
- Slayter G., 2002. "Two-phase materials" Scientific American, 206, pp124-128.
- Kim, J., Han, C., 1991. "Polymer-polymer interdiffusion during co-extrusion" Polym. Eng. Sci., 41, pp. 258-269.
- Van der Hoeven, J.C., Wimberger-Friedl R., Meijer H.E.H., 2001, "Homogeneity of multi-layers produced with a Static Mixer" Polym. Eng. Sci., 41, pp. 32-42. https://doi.org/10.1002/pen.10706
- Van Der Hoeven, J.C., Wimberger-Friedl, R., Meijer, H.E.H., 2001, "Homogeneity of multi-layers produced with a static mixer" Polymer Engineering & Science, Vol. 41, pp. 32-42. https://doi.org/10.1002/pen.10706
- Zhao, R., Macosko, C. W., 2002, "Slip at polymerpolymer interfaces: Rheological measurements on co-extruder multi-layers" Journal of Rheology, Vol. 46, pp. 145-167. https://doi.org/10.1122/1.1427912
- Yang, H. C., Park, S. K. and Oh, S.W., 2003, "Mixing Characteristics of Static Mixers" Proc. of KSME 2003 spring annual Meeting, pp. 1955-1960.
- http://www.openfoam.com/, The Openfoam source CFD toolbox.
-
http://www.extend-project.de/,The OpenFOAM
${\circledR}$ Extend Project. - Park, J. K., Kan, K. H., 2010, "Reviw on OpenFOAM An Open Source Software" Journal of computational fluids engineering, Vol.15(3), pp. 46-53.
- http://www.dfd.chalmers.se/-hani/kurser/OS/CFD/MSc/ Phd course in CFD with OpenSourse software.
- Favero, J.L., Secchi, A.R., Cardozo, N.S.M., Jasak, H., 2001, "Viscoelastic flow analysis using the software OpenFOAM and differential constitutive equations" Journal of Non-Newtonian Fluid Mechanics, Vol. 165, pp. 1625-1636.
- Holmesa, L., Faverob, J., Osswalda, T., 2012, "Numerical simulation of three-dimensional viscoelastic planar contraction flow using the software OpenFOAM" Computers &Chemical Engineering, Vol. 37, pp. 64-73. https://doi.org/10.1016/j.compchemeng.2011.09.015
- Favero, J., L. Nilo, Cardozo, , N. S. M., Secchi, A. R., Jasakc, H., 2010. "Simulation of Free Surface Viscoelastic Fluid Flow Using the viscoelastic InterFoam Solver" Computer Aided Chemical Engineering, Vol. 28, pp. 31-36. https://doi.org/10.1016/S1570-7946(10)28006-9