Journal of dental hygiene science (치위생과학회지)

The Korean Society of Dental Hygiene Science (한국치위생과학회)
권호 표지

A Study on the Shear Bond Strength of Veneering Ceramics to the Lithium Disilicate (IPS e.max CAD) Core

Lithium Disilicate (IPS e.max CAD) 코어와 전장 도재 사이의 전단결합강도에 관한 연구

  • Kim, Ki-Baek (Department of Health Science Specialized in Dental Laboratory Science and Engineering, Graduate School, Korea University) ;
  • Kim, Jae-Hong (Department of Health Science Specialized in Dental Laboratory Science and Engineering, Graduate School, Korea University)
  • 김기백 (고려대학교 일반대학원 보건과학과 치의기공전공) ;
  • 김재홍 (고려대학교 일반대학원 보건과학과 치의기공전공)
  • Published : 2013.09.30
⟨ Previous Next ⟩

Abstract

The purpose of this study was to investigate the shear bond strength between various commercial all-ceramic system core and veneering ceramics, and evaluate the clinical stability by comparing the conventional metal ceramic system. The test samples were divided into three groups: Ni-Cr alloy (metal bond), yttria-stabilized, tetragonal zirconia polycrystal (Y-TZP) (zirconia bond), lithium disilicate (lithium disilicate bond). The veneering porcelain recommended by the manufacturer for each type of material was fired to the core. After firing, the specimens were subjected to shear force in a universal testing machine. Load was applied at a crosshead speed of 0.50 mm/min until failure. Average shear strengths (mega pascal) were analyzed with a one-way analysis of variance and the Tukey test (${\alpha}$=0.05). The mean shear bond strength${\pm}$SD in MPa was $44.79{\pm}2.31$ in the Ni-Cr alloy group, $28.32{\pm}4.41$ in the Y-TZP group, $15.91{\pm}1.39$ in the Lithium disilicate group. The ANOVA showed a significant difference among groups (p<0.05). None of the all-ceramic system core and veneering ceramics could attain the high bond strength values of the metal ceramic combination.

본 연구는 심미 치과보철물에 사용되는 지르코니아, lithium disilicate 코어와 전장도재 사이의 전단결합강도를 측정하고, 금속도재관을 대조군으로 설정하여 비교하였다. 직사각기둥 모양의 시편을 각각 10개씩 제작하여 코어와 전장도재 사이의 전단결합강도를 측정한 후 파절면의 양상을 실체현미경을 통해 관찰하였다. 제한된 조건하에 시행된 실험을 통하여 심미보철 분야에 널리 적용되고 있는 치과용세라믹 코어의 전단결합강도를 확인하였으며, 측정 후 비교분석된 결과는 다음과 같다. 2종의 치과용 세라믹 코어와 전장도재 간에 전단결합강도는 금속도재관의 전단결합강도와 유의한 차이가 있었다 (p<0.05). 본 실험 결과를 토대로 ZB군은 임상적으로 받아들여지는 전단결합강도 범위 내 분포를 보이지만, LB군은 임상허용 범위에 못 미치는 결과값을 보였다. 금속도재관과 달리 지르코니아, lithium disilicate 전부도재관은 모두 혼합형 파절양상을 보였다. 결론적으로 전단결합강도 실험에 사용된 시편이 임상적인 치과보철물의 형태와는 달리 실험을 위한 시편의 형태로 제작되어 임상적 결과를 반영하지 못했으며 구강 내의 상황과도 다르다는 한계점을 가지고 있다. 추후에는 이를 보완하여 치과보철물과 유사한 형태의 시편을 이용한 전단결합 강도의 측정과 구강 내 조건을 고려한 추가 실험이 필요하다고 생각된다.

Keywords

References

  1. Braga RR, Ballester RY, Daronch M: Influence of time and adhesive system on the extrusion shear strength between feldspathic porcelain and bovine dentin. Dent Mater 16: 303-310, 2000. https://doi.org/10.1016/S0109-5641(00)00023-3
  2. Kelly JR, Nishimura I, Campbell SD: Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 75: 18-32, 1996. https://doi.org/10.1016/S0022-3913(96)90413-8
  3. Fasbinder DJ, Dennison JB, Heys D, Neiva G: A clinical evaluation of chairside lithium disilicate CAD/CAM crowns: a two-year report. J Am Dent Assoc 141: 10S-14S, 2010. https://doi.org/10.14219/jada.archive.2010.0355
  4. Tysowsky G: The science behind lithium disilicate: today's surprisingly versatile, esthetic & durable metal-free alternative. Oral Health J 10: 93-97, 2009.
  5. Kim JH, Cho YK, Kim HY: Esthetic rehabilitation of anterior dentition by all ceramic crowns using IPS e.max CAD: a case of tetracycline discoloration. J Dent Hyg Sci 11: 299-303, 2011.
  6. Sundh A, Sjogren G: A comparison of yttrium-oxide-partially-stabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramic. J Oral Rehabilitation 31: 682-688, 2004. https://doi.org/10.1111/j.1365-2842.2004.01284.x
  7. Aboushelib MN, Kleverlaan CJ, Feilzer AJ: Effect of zirconia type on its bond strength with different veneer ceramics. J Prosthodont 17: 401-408, 2008. https://doi.org/10.1111/j.1532-849X.2008.00306.x
  8. Albakry M, Guazzato M, Swain MV: Fracture toughness and hardness evaluation of three pressable all-ceramic dental materials. J Dent 31: 181-188, 2003. https://doi.org/10.1016/S0300-5712(03)00025-3
  9. Al-Dohan HM, Yaman P, Dennison JB, Razzoong ME, Lang BR: Shear strength of core-veneer interface in bi-layered ceramics. J Prosthet Dent 91: 349-355, 2004. https://doi.org/10.1016/j.prosdent.2004.02.009
  10. Isgro G, Pallav P, van der Zel JM, Feilzer AJ: The influence of the veneering porcelain and different surface treatments on the biaxial flexural strength of a heat-pressed ceramic. J Prosthet Dent 90: 465-473, 2003. https://doi.org/10.1016/j.prosdent.2003.08.003
  11. Schmitz K, Schulmeyer H. Determination of the adhesion of dental metal-porcelain bonding systems. Dental Labor 23: 1416-1420, 1975.
  12. Kim JH, Kim KB: Influence of high temperature of the porcelain firing process on the marginal fit of zirconia core. J Dent Hyg Sci 13: 135-141, 2013.
  13. Komine F, Tomic M, Gerds T, Strub JR: Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns. J Prosthet Dent 92: 359-364, 2004. https://doi.org/10.1016/j.prosdent.2004.07.018
  14. Guess PC, Kulis A, Witkowski S, Wolkewitz M, Zhang Y, Strub JR: Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocycling. Dent Mater 24: 1556-1567, 2008. https://doi.org/10.1016/j.dental.2008.03.028
  15. Craig RG: Mechanical properties in restorative dental materials. 11th ed. Mosby, New York, pp.551-592, 2002.
  16. Dundar M, Ozcan M, Comlekoglu E, Gungor MA, Artunc C: Bond strengths of veneering ceramics to reinforced ceramic core materials. Int J Prosthodont 18: 71-72, 2005.
  17. Derand T, Molin M, Kvam K: Bond strength of composite luting cement to zirconia ceramic surfaces. Dent Mater 21: 1158-1162, 2005. https://doi.org/10.1016/j.dental.2005.02.005
  18. Ishibe M, Raigrodski AJ, Flinn BD, et al.: Shear bond strengths of pressed and layered veneering ceramics to highnoble alloy and zirconia cores. J Prosthet Dent 106: 29-37, 2011. https://doi.org/10.1016/S0022-3913(11)60090-5
  19. De Melo RM, Travassos AC, Neisser MP: Shear bond strengths of a ceramic system to alternative metal alloys. J Prosthet Dent 93: 64-69, 2005. https://doi.org/10.1016/j.prosdent.2004.10.017
  20. Choi BK, Han JS, Yang JH, Lee JB, Kim SH: Shear bond strength of veneering porcelain to zirconia and metal core. J Adv Prosthodont 1: 129-135, 2009. https://doi.org/10.4047/jap.2009.1.3.129
  21. Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater 24: 299-307, 2008. https://doi.org/10.1016/j.dental.2007.05.007