참고문헌
- ASTM(2004), Standard practice for use of scrap tires in civil engineering application, Designation D 6270-98, American Society of Civil Engineers, pp. 123-127.
- Cho, H. Y.(2006), Environmental effect for utilization of coal ash as the fill materials, Report, Department of Geology, Korea University, pp. 34-38 (in Korean).
- Fytianos, K. and Schroder, H.(1997), Determination of polychlorinated dibenzodioxins and dibenzofurans in fly ash, Chromatographea, Vol. 46, No. 4, pp. 280-284. https://doi.org/10.1007/BF02496319
- Garga, V. K. and O'Shaughnessy, V.(2000a), Tire-reinforced earthfill. Part 1: construction of a test fill, performance, and retaining wall design, Canadian Geotechnical Journal, Vol. 37, No. 1, pp. 75-96. https://doi.org/10.1139/t99-084
- Garga, V. K. and O'Shaughnessy, V.(2000b), Tire-reinforced earthfill. Part 2: pull-out behaviour and reinforced slope design, Canadian Geotechnical Journal, Vol. 37, No. 1, pp. 97-116. https://doi.org/10.1139/t99-085
- Garga, V. K. and O'Shaughnessy, V.(2000c), Tire-reinforced earthfill. Part 3: environmental assessment, Canadian Geotechnical Journal, Vol. 37, No. 1, pp. 117-131. https://doi.org/10.1139/t99-086
- Hong, S. W.(1992), A study on the utilization of coal ash as fill material, Report, Department of Geotechnical Engineering, Korea Institute of Construction Technology, pp. 145-149 (in Korean).
- Koh, Y. I.(1992), An experimental study on the utilization of coal ash as highway embankment materials, Ph. D. Dissertation, Hanyang University, pp. 23-34 (in Korean).
- Koh, T. H.(1997), A study on the utilization of bottom ash as a vertical drain material for the acceleration of consolidation, Master's Thesis, Hanyang University, pp. 54-59 (in Korean).
- Koh, T. H., Lee, S. J., Shin, M. H., Hwang, S. K. and Lee, S. H.(2007), Geotechnical engineering properties of tire-bottom ash mixture for light weight fill, Korean Geotechnical Society Conference, Korean Geotechnical Society, pp. 1320-1331 (in Korean).
- Koh, T. H., Lee, S. J., Shin, M. H., Kim, B. S., Lee, J. K. and Lee, T. Y.(2010a), Evaluation for contents of contaminants and leaching characteristics of bottom ash, Journal of the Korean Geo-Environmental Society, Vol. 11, No. 6, pp. 77-83 (in Korean).
- Koh, T. H., Lee, S. J, Kim, B. S., Lee, J. K., Sagong, M. and Lee, T. Y.(2010b), Leaching characteristics of waste tire as a fill material, Korea Society of Waste Management, Vol. 27, No. 3, pp. 219-225 (in Korean).
- Lee, S. J., Kim, Y. K., Koh, T. H., Lee, S. H. and Shin, M. H.(2011), A study on the basic and compression characteristics of lightweight waste for use as fill materials, Journal of the Korean Geotechnical Society, Vol. 27, No. 5, pp. 61-74 (in Korean). https://doi.org/10.7843/kgs.2011.27.5.061
- Lee, S. J., Shin, M. H., Koh, T. H. and Hwang, S. K.(2007), Stress-strain behavior of tire-bottom ash mixture by large triaxial compression test, Korean Geotechnical Society, Korean Society of Civil Engineering, pp. 2131-2135 (in Korean).
- Lee, S. J., Shin, M. H., Koh, T. H. and Hwang, S. K.(2009), Behavior of embankment using bottom ash-tire shred mixture, Journal of the Korean Geotechnical Society, Vol. 29, No. 1-C, pp. 21-31 (in Korean).
- Lee, Y. S. and Kang, S. K.(2000), An experimental study on the engineering characteristics of functional construction materials using fly ash, Journal of the Korean Geotechnical Society, Vol. 20, No. 2-C, pp. 147-154 (in Korean).
- Lee, J. K., Koh, T. H., Sagong, M., Lee, S. J. and Lee, T. Y. (2010), Evaluation of leaching characteristics of bottom ash and waste tire, Korean Journal of Environmental Engineering, Vol. 32, No. 7, pp. 682-689 (in Korean).
- Yoon, Y. W., Choi, K. S., Yoon, G. L. and Kim, B. S.(2004), Utilization of waste tires as soil reinforcement; (1) soil reinforcing effect, Journal of the Korean Geotechnical Society, Vol. 20, No. 3, pp. 107-117 (in Korean).