DOI QR코드

DOI QR Code

유동가속부식에 영향을 미치는 수화학 인자 : pH, 용존산소, 하이드라진

Effect of Water Chemistry Factors on Flow Accelerated Corrosion : pH, DO, Hydrazine

  • 이은희 (한국원자력연구원 원자력재료개발부) ;
  • 김경모 (한국원자력연구원 원자력재료개발부) ;
  • 김홍표 (한국원자력연구원 원자력재료개발부)
  • Lee, Eun Hee (Nuclear Materials Development Division, Korea Atomic Energy Research Institute) ;
  • Kim, Kyung Mo (Nuclear Materials Development Division, Korea Atomic Energy Research Institute) ;
  • Kim, Hong Pyo (Nuclear Materials Development Division, Korea Atomic Energy Research Institute)
  • 투고 : 2013.11.06
  • 심사 : 2013.12.27
  • 발행 : 2013.12.31

초록

Flow accelerated corrosion(FAC) of the carbon steel piping in pressurized water reactors(PWRs) has been major issue in nuclear industry. Severe accident at Surry Unit 2 in 1986 initiated the worldwide interest in this area. Major parameters influencing FAC are material composition, microstructure, water chemistry, and hydrodynamics. Qualitative behaviors of FAC have been well understood but quantitative data about FAC have not been published for proprietary reason. In order to minimize the FAC in PWRs, the optimal method is to control water chemistry factors. Chemistry factors influencing FAC such as pH, corrosion potential, and hydrazine contents were reviewed in this paper. FAC rate decreased with pH up to 10 because magnetite solubility decreased with pH. Corrosion potential is generally controlled dissolved oxygen (DO) and hydrazine in secondary water. DO increased corrosion potential. FAC rate decreased with DO by stabilizing magnetite at low DO concentration or by formation of hematite at high DO concentration. Even though hydrazine is generally used to remove DO, hydrazine itself thermally decomposed to ammonia, nitrogen, and hydrogen raising pH. Hydrazine could react with iron and increased FAC rate. Effect of hydrazine on FAC is rather complex and should be careful in FAC analysis. FAC could be managed by adequate combination of pH, corrosion potential, and hydrazine.

키워드

참고문헌

  1. B. Chexal, J. Horowitz, B. Dooley, P. Millett, C. Wood, R. Jones, M. Bouchacourt, F. Nordmann, P. S. Paul, and W. Kastner, (www.pdfsearch.asia), EPRI TR-106611-R1 (1998).
  2. R. B. Dooley and V. K. Chexal, Pressure Vessels and Piping, 77, 85 (2000). https://doi.org/10.1016/S0308-0161(99)00087-3
  3. K. S. Kang, Korea Atom Ind Forum, 24, 4 (2004).
  4. K. M. Hwang, Corrosion and Protection, 10-11, 1 (2012).
  5. Y. H Choi, S. H. Kim, and S. C. Kim, KINS/RR-296 (2005).
  6. W. Y. Maeng, B. S. Choi, J. W. Yeon, D. W. Kang, H. B. Lee, and C. S. Wang, Handbook of Water Chemistry in Nuclear Power Plant, Donghwae, KAERI (2009).
  7. A. Nopper, IAEA Regional workshop south America, Argentinia (2008).
  8. J. H. Han, D. H. Hur, E. H. Lee, H. S. Jung, and U C. Kim, J. of Korean Nuclear Soc. 26, 312 (1994).
  9. W. H. Ahmed, Nuclear Power Practical Aspects chapter 6, ISBN 978-953-51-0778-1 (2012).
  10. KAERI/RR-2214/2001, KAERI (2001).
  11. D. Lister, ICG-EAC Meeting, 13-18 May, Quebec City (2012).
  12. Y. Watanabe, K. Sue, and H. Abe, Proceedings of 2009 ASME Pressure Vessel and Piping Division Conference, 26-30 July, Prague, Czech Republic (2009).
  13. E. M. Pavageau and R. Michel, International Conference on FAC, Lyon, France (2008).
  14. H. G. Heitmann and W. Kastner, Proceedings of the International Specilist's Meeting on FAC of Steels in High Temperature Water and Wet Steam, VGK Kraftwerks Technik 62, 180 (1982).
  15. T. Ohira, K. Fujiwara, F. Inada, K. Yoneda, D. H. Lister, and A. Feicht, International Conference on FAC, Lyon, France (2010).
  16. Y. Watanabe and H. Abe, International Conference on FAC, Lyon, France (2010).
  17. K. Fruzzetti and O. D. Bouvier, EPRI report 1002768 (2002).
  18. W. Sugino, D. Akutagawa, T. Ohira, A. Abe, K. Yoneda, and F. Inada, International Conference on FAC, Lyon, France (2010).
  19. M. Merilo, D. Munson, M. Bouchacourt, and J. S. Horowitz, International Conference on Water Chemistry of Nuclear Reactor Systems, 22-26 April, Avignon, France (2002).
  20. O. De Bouvier, M. Bouchacourt, F. vermorel, and L. Millet, International Conference on Water Chemistry of Nuclear Reactor Systems, 22-26 October, Bournemouth, UK (2000).
  21. J. H. Moon, H. H Chung, K. W. Sung, U. C. Kim, and J. S. Rho, Nuclear Engineering Technology, 37, 375 (2005).
  22. E. M. Pavageau and K. Fruzzetti, EPRI report 1008208 (2005).
  23. E. M. Pavageau, O. De Bouvier and K. Fruzzetti, International Conference on Water Chemistry of Nuclear Reactor Systems, 11-14 October, California, USA (2004).
  24. O. De Bouvier, M. Bouchacourt, and K. Fruzzetti, International Conference on Water Chemistry of Nuclear Reactor Systems, 22-26 April, Avignon, France (2002).

피인용 문헌

  1. Effect of Cr on Flow Accelerated Corrosion of Carbon Steel vol.14, pp.1, 2015, https://doi.org/10.14773/cst.2015.14.1.25
  2. Analysis of Pipe Wall-thinning Caused by Water Chemistry Change in Secondary System of Nuclear Power Plant vol.14, pp.6, 2015, https://doi.org/10.14773/cst.2015.14.6.325
  3. Analysis of Wall-Thinning Effects Caused by Power Uprates in the Secondary System of a Nuclear Power Plant vol.15, pp.3, 2016, https://doi.org/10.14773/cst.2016.15.3.135
  4. Effects of alloys and flow velocity on welded pipeline wall thinning in simulated secondary environment for nuclear power plants vol.15, pp.5, 2016, https://doi.org/10.14773/cst.2016.15.5.245
  5. 유동가속부식에 대한 통계적 모델링 해석방법 개발: 유속, 온도, pH 및 Cr 함량의 효과 vol.12, pp.2, 2016, https://doi.org/10.20466/kpvp.2016.12.2.040