DOI QR코드

DOI QR Code

Output Characteristics of Linear Switched Reluctance Motor with YBCO Tape Conductors

  • Hirayama, Tadashi (Graduate School of Science and Engineering, Kagoshima University) ;
  • Asakawa, Shinichiro (Graduate School of Science and Engineering, Kagoshima University) ;
  • Kawabata, Shuma (Graduate School of Science and Engineering, Kagoshima University)
  • Received : 2013.10.12
  • Accepted : 2013.10.31
  • Published : 2013.12.01

Abstract

This paper presents output characteristics of a linear switched reluctance motor (LSRM) with excitation windings wound by using high-temperature superconducting (HTS) tapes. In a double-sided LSRM, Bi-2223 or YBCO tape conductors are used for the excitation windings. The characteristics of the LSRM are obtained by a finite element method analysis. We can obtain large thrust compared with a conventional LSRM by using YBCO tape conductors. Also, the effect of a configuration of the YBCO coil on the thrust is calculated. We discuss a suitable coil configuration for the average thrust upgrading.

Keywords

References

  1. J. Park, S. Jang, J. Choi, S. Sung, and I. Kim, "Dynamic and Experimental Performance of Linear-Switched Reluctance Machine with Inductance Variation According to Airgap Length," IEEE Trans. on Magnetics, vol. 46, pp.2334-2337, June 2010. https://doi.org/10.1109/TMAG.2010.2043927
  2. G. Baoming, A. Almeida, and F. Ferreira, "Design of Transverse Flux Linear Switched Reluctance Motor," IEEE Trans. on Magnetics, vol. 45, pp.113-119, January 2009. https://doi.org/10.1109/TMAG.2008.2006193
  3. N. Vattikuti, R. Vandana, and B. G. Fernandes, "A novel high force density linear segmented switched reluctance machine," IECON 2008, pp.1083-1088, November 2008.
  4. L. Kolomeitsev, D. Kraynov, S. Pakhomin, F. Rednov, E. Kallenbach, V. Kireev, T. Schneider, and J. Bocker, "Linear Switched Reluctance Motor as a High Efficiency Propulsion System for Railway Vehicles," SPEEDAM 2008, pp.155-160, 2008.
  5. Hirayama T., Uwada K., Kawabata S., "Characteristics Analysis and Verification of a Double-sided HTS Linear Switched Reluctance Motor," Proceedings of the Twenty-Fourth International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2012, pp. 743-746, May 2013.
  6. T. Hirayama, K. Uwada, S. Kawabata, "Static Characteristics of a Double-sided Linear Switched Reluctance Motor with High-temperature Superconducting Excitation Winding," Proceedings of The 15th International Conference on Electrical Machines and Systems, No. DS3G5-9, pp. 1-4 (CD-ROM), October 2012.
  7. M. Ogata, K. Mizuno, "Status of High-temperature Superconducting Wires in the World," Railway Technical Research Institute (RTRI REPORT), Vol.25, No. 3, pp. 53-56, March 2011. (in Japanese)

Cited by

  1. Experimental Manufacture and Performance Evaluation of Linear Switched Reluctance Motor with HTS Excitation Windings vol.81, 2016, https://doi.org/10.1016/j.phpro.2016.04.044
  2. Study on Thrust Improvement and Ripple Suppression of HTS Linear Switched Reluctance Motor with Coreless HTS Excitation Windings vol.81, 2016, https://doi.org/10.1016/j.phpro.2016.04.045