References
- ARGEMA(1992), Design guides for offshore structures: offshore pile design, Tirant PL, Paris
- Baeg, G. H. and Sa, G. M. (2003), "Assessment of Design Criteria for Bearing Capacity of Rock Socketed Drilled Shaft", Journal of Korean Geotechnical Society (KGS), Vol.19, No.1, pp.37-49.
- Carrubba, P.(1997), "Skin friction of large-diameter piles socketed into rock" Canadian Geotechnical Journal, Vol.34, pp.230-240. https://doi.org/10.1139/t96-104
- Cho, H. Y., Jung., S. S., and Seol, H. I. (2009), "End Bearing Load Transfer Behavior of Rock Socketed Drilled Shafts", Journal of Korean Geotechnical Society (KGS), Vol.25, No.8, pp.77-93.
- Choi, G. N. and Yoo, C. S. (2011), "Numerical Investigation on Load Supporting Mechanism of a Pile Constructed above Underground Cavity", Journal of Korean Geotechnical Society (KGS), Vol.27, No.1, pp.5-16. https://doi.org/10.7843/kgs.2011.27.1.005
- Coates, D. F. (1967), Rock mechanics principles. Department of Energy, Mines and Resources, Mines Branch, Queen's printer, Ottawa.
- Harberfield, C. M. and Seidel, J. P. (1999), "Some recent advances in the modeling of soft rock joints in direct shear", Geotechnical and Geological Engineering, Vol.17, pp.177-195. https://doi.org/10.1023/A:1008900905076
- Hoek, E. and Brown, E. T. (1997), "Practical Estimates of Rock Mass Strength", International Journal of Rock Mechanics and Mining Sciences, Vol.34, No.8, pp.1165-1186. https://doi.org/10.1016/S1365-1609(97)80069-X
- Hoek, E., Kaiser, P. K., and Bawden, W. F. (1995), Support of underground excavations in hard rock, A.A. Balkema, Roterdam, pp.215.
- Hong, W. P., Yea, G. G., Nam, J. M., and Lee, J. H.(2005), "Settlement Characteristics of Large Drilled Shafts Embedded in Bed Rocks", Journal of Korean Geotechnical Society (KGS), Vol.21, No.5, pp.111-122.
- Itasca Consulting Group, Inc. (2011), FLAC, Fast lagrangiananalysis of continua, Ver. 7.0, Vol. I : User's Guide, Minnesota,Itasca Consulting Group, INC.
- Logan, D. L. (2007),"A first course in the finite element method, 4th ed." Thomson, pp.361.
- Pells P. J. (1977), Theoretical and model studies related to the bearing capacity of rock. Paper presented to Sydney Group of Australian Geomechanics Society
- Rowe, R. K. and Armitage, H. H. (1987), "A design method for drilled piers in soft rock", Canadian Geotech Journal, Vol.24, pp.126-142. https://doi.org/10.1139/t87-011
- SCJV(2005a), Incheon Bridge project design package No.3 Pile load test report : TP-3 (W8)
- SCJV(2005b), Incheon Bridge project design package No.9 Geotechnical investigation report.
- Seol, H. I., Jeong, S. S., and Kim, Y. H. (2008), "FE Analysis of Rock-Socketed Drilled Shafts Using Load Transfer Method", Journal of Korean Geotechnical Society (KGS), Vol.24, No.12, pp.33-40.
- Serrano, A. and Olalla, C. (2002), "Ultimate bearing capacity at the tip of a pile in rock : part-1 :theory.", International Journal of Rock Mechanics and Mining Sciences, Vol.39, pp.847-866. https://doi.org/10.1016/S1365-1609(02)00053-9
- Teng, W. C. (1962), Foundation design, Prentice-Hall, Inc, NJ.
- Turner, J. and Ramey, S. (2010), "Base Resistance of drilled shafts in fractured rock", ASCE, The art of foundation engineering practice congress 2010, pp.687-701.
- Zhang, L. and Einstein H. (1998), "End bearing capacity of drilled shafts in rock", Journal of Geotechnical and Geoenvironmental Engineering, Vol.124(7), pp.57-58.
Cited by
- 암반에 설치된 현장타설말뚝의 극한선단지지력에 관한 연구 vol.29, pp.11, 2013, https://doi.org/10.7843/kgs.2013.29.11.5