Korean Journal of Computational Design and Engineering (한국CDE학회논문집)

Society for Computational Design and Engineering (한국CDE학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Assembly Sequence Generating System Based on Parts Liaison Analyzing

부품 연관 관계 분석 기반의 조립 순서 생성 시스템 개발

  • Park, Hong-Seok (School of Mechanical Engineering, Univ. of Ulsan) ;
  • Park, Jin-Woo (Department of Automotive and Mechanical Engineering, Graduate School, Univ. of Ulsan)
  • 박홍석 (울산대학교 기계공학부) ;
  • 박진우 (울산대학교 대학원 기계자동차공학과)
  • Received : 2012.09.24
  • Accepted : 2012.11.07
  • Published : 2013.02.01
Download PDF
⟨ Previous Next ⟩

Abstract

Nowadays in order to perform assembly process planning by using CAPP (Computer Aided Process Planning), researches to generate the assembly sequence automatically have come under constant interest by many researchers and they are devoted to optimize the assembly sequence. In this paper, the product on analyzing the relationship between assembled parts via contacting information such as common area, automatically based on the liaison graph of the product. To verify the validness and efficiency of the approach, the simple product is tested in the experimental way.

Keywords

References

  1. Dini, G., et al., 1999, Generation of Optimized Assembly Sequences Using Genetic Algorithms, CIRP Annals-Manufacturing Technology, 48(1), pp. 17-20. https://doi.org/10.1016/S0007-8506(07)63122-9
  2. Guo, Y. W., et al., 2009, Application of Particle Swarm Optimisation in Integrated Process Planning and Scheduling, Robotics and Computer- Integrated Manufacturing, 25(2), pp. 280-288. https://doi.org/10.1016/j.rcim.2007.12.002
  3. Su, Q., Lai, S. J. and Liu, J., 2009, Geometric Computation Based Assembly Sequencing and Evaluating in Terms of Assembly Angle, Direction, Reorientation, and Stability, Computer- Aided Design, 41(7), pp. 479-489. https://doi.org/10.1016/j.cad.2009.03.006
  4. Kim, J. E., Jeong, S. H. and Jee, H. S., 2008, Part Assembly Sequences for Human Assembler Postures, Transactions of the Society of CAD/CAM Engineers, 13(5), pp. 391-402.
  5. Yin, Z. P., Ding, H., Li, H. X. and Xiong, Y. L., 2003, A Connector-based Hierarchical Approach to Assembly Sequence Planning for Mechanical Assemblies, Computer-Aided Design, 35(1), pp. 37-56. https://doi.org/10.1016/S0010-4485(01)00174-9
  6. Su, Q., 2009, A Hierarchical Approach on Assembly Sequence Planning and Optimal Sequences Analysing, Robotics and Computer-Integrated Manufacturing, 25(1), pp. 224-234. https://doi.org/10.1016/j.rcim.2007.11.006
  7. Weiler, K., 1986, Topological Structures for Geometric Modeling, Ph.D. Thesis, Rensselaer Polytechnic Institute.
  8. Marian, R. M., Luong, L. H. S. and Abhary, K., 2006, A Genetic Algorithm for the Optimization of Assembly Sequences, Computers & Industrial Engineering, 50(4), pp. 503-527. https://doi.org/10.1016/j.cie.2005.07.007
  9. Chen, W. C., et al., 2008, A Three-stage Integrated Approach for Assembly Sequence Planning Using Neural Networks, Expert Systems with Applications, 34(3), pp. 1777-1786. https://doi.org/10.1016/j.eswa.2007.01.034

Cited by

  1. Development of Automatic Selection of Assembly Direction and Assembly Sequence Correction System vol.18, pp.6, 2013, https://doi.org/10.7315/CADCAM.2013.417